Sodex Sport S28240 User manual

DESCRIPTION
Steel structure 40x40
Powder coated
CONFORM
ASSEMBLY INSTRUCTIONS
TWO COMPETITION
SHUTTLECOCK POSTS
PRODUCT REF :S28240 PAIR
ASSEMBLY TIME
The time to assemble this product is estimated at 5 minutes with 2 people.
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is recommended to:
- Check every week that all the bolts are correctly tightened.
- Fix paint defects if the unit has been damaged, using the adapted paint specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
WARRANTY
One full year parts and labour guarantee. Every claim regarding the condition of the delivered equipment
has to be done within the warranty period following receipt of the product.
The warranty will not apply to:
- Any degradation during transport.
- Any degradation due to poor maintenance.
- Any degradation due to use differing from which the product was intended.
- Any defect claimed after the end of the warranty period.
- Any damage due to a faulty installation or assembly of the product.

2
ASSEMBLY
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1- ASSEMBLY OF THE BASES WITH WHEELS TO THE POST (x2)
x2
Turn-knobs
M10x15
X2
Turn-knobs M10x15
Turn-knob
M10x15
STEP 1 STEP 2
NECESSARY
ITEMS
x1
Turn-knobs
M10x15

3
ASSEMBLY
2– POSITIONING OF THE HEIGHT ADJUSTMENT SYSTEM (x2)
SS Turn-knobs
M10x15
NECESSARY
ITEMS
x1
SS Turn-knobs
M10x15

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg)
Dim.
(mm)
A1
S28240-1
+ S28240-2
+S27220-3
A
+ A
+ F
Posts L & R + system of
height adjustment 1 + 1 + 2
Plastic bubbles
+ cardboard 2
layers
10 1470x350x100
A2 S27240-4FCounterweight with
wheels 1Cardboard 2 layers 62 570x410x125
A3 S27240-4FCounterweight with
wheels 1Cardboard 2 layers 62 560x410x125
PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 NNV40 Caps 40x40 with groove 4Put on the posts
A2 +
A3
BTBI0860 +
LTBA081915 +
TTBD08
Half threaded screws BC
M8x60 + Washers BC 8 +
Locknuts BC M8
4 + 8 + 4 Put on the bases
A1
BTBH0550 +
LTBA061910 +
TTBD05
Screw BC M5x50 +
Washers BC 6 +
Locknut BC M5
1 + 2 + 1 To assemble the
ratchet to the posts
A1 DTCL Ratchet and ratchet
support 1Fix to the post
A2 +
A3 TC05 Rubber thickness 5 4Put under the bases
A2 +
A3 BXN06530 Wheels D65 2 + 2 On bases
A2 +
A3 1 + 1 To transport the bases
Carry strap
ACCESSORIES IN CLEAR PVC BAG
Package
N° Ref Designation Description Qty Note
A1 NVN1015 Turn-knobs
M10x15 2
The PVC bag must be
put in the lower part
of the post.
Used to fix the bases
to the posts
A1 KIM1015 SS Turn-knobs
M10x15 2Adjusts the height of the posts
VISA PACKING DEPARTMENT DATE:
PACKING LIST
TWO COMPETITION
SHUTTLECOCK POSTS
PRODUCT REF S28240 Index B PAIR