Solar-Log 2050 User manual

Solar-Log® Assembly Guide
Solar-Log 2050
®

2
What’s in Your Shipment
The shipment comes with the following components:
• Solar-Log 2050 (art. no. 840850: In an indoor/outdoor enclosure, the assembly includes a
revenue grade meter, power supply, fusing blocks, shorting blocks, RS485/422 ports, and a
swing frame
• Current Transformers (CTs) models and number of units vary
• One of the following Solar-Log® data logger Models: Solar-Log 1200 (art. no. 255591),
Solar-Log 1900 (art. no. 256241), Solar-Log 2000 (art. no. 255592)
Figure 1: Solar-Log 2050, CTs, Solar-Log® Data Logger

3
Assembling Your System
Step 1
Remove the front cover on the Solar-Log 2050 enclosure by unscrewing the 4 plastic captive
screws.
Step 2
Remove the 2 screws (Figure 2) & open the swing frame.
Figure 2: Swing frame screws

4
Step 3
Mount the Logger to the swing frame using the screws, nuts & washers already attached to the
black swing frame (Figure 3). Be sure to guide wires through the wire canal on the back of the
logger (Figure 4).
Figure 3 & 4: Logger screw holes for attaching to swing frame. Wire canal on the back of the logger.
Figure 5: Logger mounted to the swing frame with wires through the wire canal on the back of the logger

5
Step 4
Connect the Power, Port A & Port B connectors to the Logger (Figure 6).
Step 5
Mount the complete assembly using the 4 pre-drilled mounting holes. Do not drill or screw di-
rectly into the enclosure (Figure 6).
Figure 6: Logger connections
Figure 6: pre-drilled mounting holes

®
Solar Data Systems, Inc. • Bethel, CT 06801 • www.solar-log.net
Subject to change without notice - USA | 06.2018 | Version 1.0
Step 6
Visit https://www.solar-log-america.com/support/downloads/manuals/ to download the com-
plete installation manual for further configuration and installation instructions.
Technical Support
For further support please call [phone] to speak with a member of our technical support
team, or email the support team at [email protected].