SolarBright K-LED25 User manual

11 Progress Circuit Prestons NSW 2170 –Ph. 1300 852 622 –www.solarbright.com.au
Safety - When installing SolarBright LED system ensure that all safety measures and precautions are taken.
The installation of the product will require using power tools, climbing on the roof and possibly working in a
confined space. The product has been designed to be installed by an experienced handyman; however the
installer must be competent to carry out this task safely and correctly.
Ensure the area surrounding & top of the LED light inside the roof space is clear, insulation and other
objects must be secured away from the LED light
Roof work: Please ensure the solar panel is installed in north pitched facing position and away from any
potential shading. The performance of the LED will depend on the quality and amount of the light
captured by the solar panel.
Tiled Roof
Metal Roof
Attach the
brackets to the
roof structure
as shown to
match the size
of the panel
Place roof tile
in their normal
position
LED SOLARLIGHT INSTALLATION INSTRUCTION
Model
Description
Inclusions
K-LED25
250mm LED light for day
operation only
250mm diffuser kit with LED light, 40w solar panel, 5m or
10m cable, fixing brackets for tiled & metal roof
K-LED40
400mm LED light for day
operation only
400mm diffuser kit with LED light, 40w solar panel, 5m or
10m cable, fixing brackets for tiled & metal roof
K-LED25B
250mm LED light for day
& night operation
250mm diffuser kit & LED light, 40w solar panel, 5m or 10m
cable, fixing brackets for tiled & metal roof, battery pack
K-LED40B
400mm LED light for day
& night operation
400mm diffuser kit & LED light, 40w solar panel, 5m or 10m
cable, fixing brackets for tiled & metal roof, battery pack

11 Progress Circuit Prestons NSW 2170 –Ph. 1300 852 622 –www.solarbright.com.au
Connect the
cable provided
to the back of
the solar panel
Secure the
panels to the
bracket and
insert the cable
inside the roof
space safely.
Ceiling work:
1- Using the template provided (plastic strip with holes at either end), centre one hole in the middle of
the ceiling location where the ceiling diffuser is to be installed and hold with a screwdriver. Using a
pencil or marker, trace a circle in the outer hole of the template on the ceiling and then cut out the
circle in the ceiling with a gyprock/reciprocating saw.
2- Connect the cable to the LED light. (one end of cable is connected to solar panel and the other to
the LED Light)
3- Insert the ceiling ring into the hole and secure it to the ceiling using the screws and angle anchors.
4- Ensure the area surrounding and top of the LED light inside the roof is clear, insulation and other
objects must be secured away from the LED light.
5- Align the lugs on the diffuser with ceiling ring and push up into ceiling ring groove, twist the diffuser
clockwise to lock into place.
6- Remote controls are supplied to turn on/off the LED for the day & night models only.
7- Attach battery pack to roof frame as shown (for day & night models only)
LED for day operation only
Battery pack for LED day & night operation