Data Logger LAN Stick Installation
1. Insert LAN Stick to COM port.
2. Fasten the LAN Stick.
Description of Symbols
a. The connected wireless router can normally access to
Internet;
b. The communication address of the inverter MUST BE
" ", which is default value.
c. A computer is connected to this device for parameter
setting.
To ensure normal use of the datalogger, before using
the datalogger, be sure that:
01
Connect LAN Stick to the corresponding interface on the
inverter. Solis-1P5K-4G is used as an example in this manual.
Please perform relevant operations as indicated below:
Data Logger LAN Stick Interface
Corresponding groove
1Electrical Connection
2
1
NOTES
LAN Stick automatically obtains IP by default.
If the network cable supports automatically obtains
IP, please jump to “ ” for APP registration.
If network cable do not support obtains IP automatically ,
please continue to follow “ ” for IP settings.
3
2
Data Logger LAN Stick is mainly used in inverters to realize
simple and quick access to Internet. Users can easily check
device information by logging in the monitoring center. The
communication topology is as shown below:
Data Logger LAN Stick
Quick User Guide
DLS Version: 1.0
iPhoneAndroid PC
Wireless RouterData Logger
LAN Stick
Introduction
Delivery Content
1 pc LAN Stick
1 pc Data Logger LAN Stick Quick User Guide
