
1.SETUP
Connect the cable from the solar panel to the cable coming out of the camera 3 and
screw on the waterproof cap.
Power up:
Remove the rubber plug from the solar panel to find the power switch 4. When you
move the switch to the ON position the camera should power up right away, if not, the
battery in the solar panel module needs to be charged.
Charging:
To charge you can simply leave the panel exposed to sunlight for the day. A full charge
will require that the panel is exposed to sunlight for about 12 hours. For a faster charge
connect the included USB cable to the USB charge port and a USB wall adapter.
5HFRPPHQGHG
LQVWDOOLQJWKHFDPHUD
DERXW0