Sommer Cable DVM-HDBT-RXLPOC User manual

User Manual
DVM-HDBT-RXLPOC
DVM HDBaseT Receiver 70m PowerOverCable
All Rights Reserved
Version:DVM-HDBT-RXLPOC_2015V1.0

HDBaseT Receiver with PoC
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till March 2015. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All product function is valid till 2015-6-10.
Trademarks
Product model and logo are trademarks.Any other trademarks mentioned in this manual
are acknowledged as the properties of the trademark owner. No part of this publication
may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

HDBaseT Receiver with PoC
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

HDBaseT Receiver with PoC
Contents
1. Introduction.................................................................................................................1
1.1 Introduction to HDBaseT Receiver....................................................................1
1.2 Features ............................................................................................................1
1.3 Package List......................................................................................................1
2. Product Appearance...................................................................................................2
3. System Connection.....................................................................................................3
3.1 Usage Precautions............................................................................................3
3.2 System Diagram................................................................................................3
3.3 Connection Procedure.......................................................................................3
3.4 Application.........................................................................................................4
3.5 Twisted Pair Cable Connection..........................................................................4
4. Specification ...............................................................................................................5
5. Panel Drawing ............................................................................................................6
6. Troubleshooting & Maintenance .................................................................................6
7. After-sales Service......................................................................................................7

HDBaseT Receiver with PoC
1
1. Introduction
1.1 Introduction to HDBaseT Receiver
HDBaseT Receiver adopts HDBaseT technology to deliver HDMI signal, two-way IR
control, bi-directional RS232 data up to 70m with perfect quality. It also supports CEC
and PoC.
It works well with HDBT transmitters or other devices boasting HDBT OUT port.
1.2 Features
Support Full HD: Delivers resolutions including 800x600@60Hz, 1024x768@Hz,
1280x720@60Hz, 1280x1024@60Hz, 1366x768@60Hz, 1600x1200@60Hz,
1920x1080@60Hz, 1920x1200@60Hz, 3D, 4K×2K
Max transmission distance is up to 70 meters over single CAT5e/CAT6 cable.
High Bandwidth: 10.2Gps.
HDTV Compatible, use HDMI 1.4 and HDCP compliant.
Support PoC & CEC.
Connect with a displayer to transmit EDID and HPD signals constantly by using a
CAT5e cable.
Use HDBaseT technology.
Bi-directional RS232/IR control.
LED indicators show work status.
Wall/table-mountable aluminium enclosure, PT case design.
1.3 Package List

1 x HDBaseT Receiver

2 x Mounting brackets

4 x Screws

1 x RS232 cable

4 x Plastic cushions

1 x User Manual
Notes
:
Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.

HDBaseT Receiver with PoC
2
2. Product Appearance
No. Name Description
①
ON Working status indicator, blink when the device is working
②
LINK Twisted Pair link status indicator, illuminates when the port has a
connection
③
IN HDCP compliance indicator, illuminate green when the connected
device supports HDCP; blink green when the connected device
does not support HDCP
④
POWER
LED Illuminate red when powered on
⑤
HDBT IN Connect to the HDBT OUT port of other devices (e.g. HDBaseT
Transmitter) with a CAT5e cable, support bi-directional PoC
⑥
HDMI OUT Connect to HDMI display
⑦
IR IN Connect with IR receiver, the IR signal received from this port can
only send out via other devices (e.g. HDBaseT Transmitter)
⑧
IR OUT Connect with IR transmitter, the sent IR signal are received by
other devices (e.g. HDBaseT Transmitter)
⑨
RS232 Serial port, 3-pin captive screw connector, connects with the
control terminal, supports bi-directional RS232 control
⑩
DC 24V Connect with power supply (not necessary if the other device s
connects with power and supports PoC)

Pictures shown in this manual are for reference only.

HDBaseT Receiver with PoC
3
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
3.2 System Diagram
The following diagram illustrates typical input and output connections that can be
utilized with HDBaseT Receiver:
3.3 Connection Procedure
(Exampled by connecting to HDBaseT Transmitter)
Step1.Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of HDBaseT
Transmitter with HDMI cable.
Step2.Connect HDBT OUT port of HDBaseT Transmitter to HDBT IN port of HDBaseT
Receiver through a CAT5e/CAT6 cable.
Step3.Connect a HDMI displayer (such as HDTV) to HDMI OUT port of HDBaseT
Receiver with HDMI cable.
Step4.Both HDBaseT Transmitter and HDBaseT Receiver have IR IN and OUT. When
one end is used as an IR receiver, the other end will be used as an IR transmitter.
For example: When “IR IN” of HDBaseT Transmitter connects with an IR
receiver, the IR transmitter must be connected to “IR OUT” of HDBaseT
Receiver.
Step5.Connect the RS232 port of the devices to be controlled and the receiver or the
transmitter.
Step6.Connect with DC 24V power adaptor(s) (One is sufficient as the other end can be
DVD
HDMI HDMI
CAT5e
INPUT
Rs232
control panel
Projector
IR Remote
Receiver
Transmitter

HDBaseT Receiver with PoC
4
energized with PoC function).
3.4 Application
HDBaseT Receiver has a good application in various occasions, such as computer
realm, monitoring, big screen displaying, meeting room, education and bank & securities
institution etc.
3.5 Twisted Pair Cable Connection
The twisted pair used in this extender MUST be a straight-through cable. The
connectors can be T568A or T568B, but both sides must be the same.
Note: To make a better transmission, cable connectors MUST be metallic, the shielded
layer of cable MUST be connected to the connector’s metal shell.
TIA/EIAT568A
TIA/EIAT568B
Pin Cable color Pin Cable color
1 green white 1 orange white
2
green
2
orange
3 orange white 3 green white
4 blue 4 blue
5
blue white
5
blue white
6
orange
6
green
7 brown white 7 brown white
8 brown 8 brown
1st
Group
4--5
1st
Group
4--5
2nd
Group
3--6 2nd
Group
1--2
3rd
Group
1--2
3rd
Group
3--6
4th
Group
7--8 4th
Group
7--8

HDBaseT Receiver with PoC
5
4. Specification
Input& Output
Input 1 IR (3.5mm mini jack)
1 HDBT (RJ-45)
1 RS232 (3-pin pluggable terminal block)
Output 1 HDMI (HDMI female) 1 IR (3.5mm mini jack)
1RS232 (3-pin pluggable terminal block)
Video Signal HDMI1.4
Audio Digital audio, transmit through HDMI audio
Transmission Mode HDBaseT
General
Resolution 800x600@60Hz, 1024x768@Hz, 1280x720@60Hz,
1280x1024@60Hz, 1366x768@60Hz, 1600x1200@60Hz,
1920x1080@60Hz, 1920x1200@60Hz, 3D, 4K×2K
Transmission Distance ≤70M
SNR >70dB@ 100MHz-100M
Bandwidth 10.2Gbps
THD ＜0.005%@1KHz
HDMI Standard Support HDMI1.4& HDCP
Impedance 75Ω
Temperature -10 ~ +40℃
Humidity 10% ~ 90%
Power Supply Input: 100VAC~240VAC, 50/60Hz; Output: DC 24V, 1.25A
Power Consumption 9.6W
Dimension (W*H*D) 110 x 77x 30 mm
Weight 0.5Kg

All nominal levels are at ±10%.

HDBaseT Receiver with PoC
6
5. Panel Drawing
6. Troubleshooting & Maintenance
Problems
Causes
Solutions
Poor quality of output
images
Incorrect setting on the
display Check the display’s setting
Bad quality of the cable Try another high quality
connection cable
No output image
No signal at the input/ output
end
Check with oscilloscope or
multimeter if there is any signal
at the input / output end.
Fail or loose connection Make sure the connection is
good
The extender is broken
Send it to authorized dealer for
repairing.
Cannot control the
device by control
device (e.g. a PC)
through RS232 port
Wrong RS232
communication parameters
Make sure the RS232
communication parameters
are correct.
The device has already been
broken Send it to authorized dealer for repairing.
Static becomes
stronger when
connecting the video
connectors
Bad grounding Check the grounding and
make sure it is connected well.
Cannot control the
device by RS232 / IR
The device has already been
broken
Send it to authorized dealer for
repairing.
HDBaseT Lite Receiver/PoC
HDBaseTTechnology
HDCPCompliant
ON LINK OUT
4K x 2K Support
60m with PoC
Tx Rx
HDMI OUT
HDBT IN RS232IR IN IR OUT
PoC
110.03 mm 14.00 mm
30.00 mm
77.00 mm
50.00 mm

HDBaseT Receiver with PoC
7

If your problem persists after following the above troubleshooting steps, seek
further help from authorized dealer or our technical support.
7. After-sales Service
If there appear some problems when running the device, please check and deal with the
problems reference to this user manual.
1) Product Limited Warranty: We warrant that our products will be free from defects
in materials and workmanship for three years, which starts from the first day the
product leaves warehouse (check the SN mark on the product).
Proof of purchase in the form of a bill of sale or receipted invoice must be presented
to obtain warranty service.
2) What the warranty does not cover:
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear
Use of supplies or parts not meeting our specifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized
Other causes which does not relate to a product defect
Delivery, installation or labor charges for installation or setup of the product
3) Technical Support: Email to our after-sales department or make a call, please
inform us the following information about your cases.
Product version and name.
Detailed failure situations.
The formation of the cases.
Remarks: For any questions or problems, please try to get help from your local
distributor.

SOMMER CABLE GmbH
Humboldtstraße 32-36
75334 Straubenhardt / Germany
Telefon: [phone]
Support Tel: [phone]
Fax: [phone]
E-Mail: [email protected]
Internet: www.sommercable.com