Sonance VP10SUB Instruction Manual

Product Family Overview
From the company that invented the category, comes the
BEST SOUNDING, best looking and most complete range of
in-wall and in-ceiling speakers ever. Visual Performance®Series
comes in various shapes and sizes to compliment down lights and
décor and a complete range that allows you to enjoy a consistent
aesthetic for any application in any room.
Features and Benefits
VP10SUB In-Wall subwoofer combines elegant, modern
visual design with uncompromised bass performance for
home theaters and multimedia solutions. The integrated
cabinet design is only 3 7/8” (98mm) deep allowing it to be
mounted directly into a 15” x 15” (381mm x 381mm) cutout in
a standard 2 x 4 stud bay.
• VP10SUB design allows to fit directly into a drywall cutout or
recess in a concrete or brick wall
• VP10SUB features an innovative low profile driver with an ultra
low distortion motor, 4” diameter voice coil and dual spiders to
optimize the performance of the laminated carbon fiber
honeycomb woofer
• The VP10SUB extends down to 34Hz using the matching
VP10SUB Amplifier and is capable of producing 105dB of output
at one meter with one subwoofer and 110dB of output at one
meter with two subwoofers
• The outboard VP10SUB amplifier features a Class D output
stage, line, and speaker level high pass filtering and is designed
specifically to the VP10SUB. Each amplifier is capable
of driving up to two subwoofers
Subwoofer Features
• Low profile driver
• 1.5” of peak to peak travel
• Ultra low distortion motor
• 4” diameter voice coil
• Dual spiders
• Laminated carbon fiber honeycomb cone
• Die-cast basket
• Visual Performance grille
• Integrated Cabinet
Sonance Digital Amplifier
• Capable of driving two subwoofers
• Class D output stage
• Line and speaker level high pass filtering
• Designed specifically for the VP10SUB
VP10SUB VP10SUB AMP
VP10SUB, VP10SUB AMP
14.39 [365.6]
14.39 [365.6]
12.56 [319.0]
12.56 [319.0]
3.81 [96.9]
15.00 [381.0]
14.39 [365.6]
14.39 [365.6]
12.56 [319.0]
12.56 [319.0]
3.81 [96.9]
15.00 [381.0]
Specifications
Width: 15” (381mm)
Height: 15” (381mm)
Depth: 3 7/8” (98mm)
Cut Out Width: 12 3/4” (324mm)
Cut Out Height: 12 3/4” (324mm)
Width
Cut Out
Width
Depth
Height
Cut Out
Height
VISUAL PERFORMANCE®SERIES

SPECIFICATIONS VP10SUB AMP
UOM
Output Power RMS:
Output Power Peak:
AC Fuse:
AC Power
Consumption:
Signal-to-Noise Ratio:
230 Watts @ 8 ohms (1% THD, 32hz)
370 Watts @ 4 ohms (1% THD, 32hz)
260 Watts @ 8 ohms (7% THD, 32hz)
470 Watts @ 4 ohms (8% THD, 32hz)
120v Model - 8 amp (T8A - 250V)
230v Model - 6.3 amp (T6.3A - 250V)
588w @ 4 ohms (sine wave, full power)
396w @ 4 ohms (music, full power)
Heat Output: 102 BTU/HR @ 8 ohms (music, full power)
183 BTU/HR @ 4 ohms (music, full power)
Auto-On
Trigger Sensitivity:
7.0mV LFE Line Input
3.5mV Stereo Line Input
Controls: Variable crossover freq and output level,
Phase switch, Bypass switch
Dimensions
(WxHxD):
16 3/4" x 3 7/8" x 13 1/2"
(425mm x 98mm x 343mm)
RMF Dimensions
(WxHxD):
19" x 3 7/8" x 13 1/2"
(483mm x 98mm x 343mm)
Rack Space Requirement:
2U, Rack Ears included
Certifications: ETL, CE, C-Tick, FCC
Shipping Weight: 19 lbs (8.6kg) each
Low-Pass
Crossover Freq:
(BYPASS Switch OFF): 50Hz ~ 150Hz
(variable), 12dB/octave
(BYPASS Switch ON): 250Hz (fixed),
12dB/octave
-95dB (w/ 22kHz A-wtg. Filter)
Line Input Impedance: 600 ohms
Hi Level Out Hi-Pass Filter:
-3dB @ 150Hz, 6dB/octave
Line Level Out Hi-Pass Filter:
-3dB @ 150Hz, 6dB/octave
Line Output Impedance:
600 ohms
SKU 92952 (120V) | 92953 (230V)
Each
SPECIFICATIONS VP10SUB
10" (254mm)
laminated carbon fiber cone
with a rubber surround
34Hz - 250Hz ±3dB
UOM
Woofer
Frequency Response
Impedance
Requirement
Sensitivity
Grille
Dimensions
(W x H x D)
Cut-Out Dimensions
(W x H x D)
Shipping Weight
8 ohms nominal
Requires Cinema SUB 10-250
amplifier, sold separately
90dB SPL
(2.83v/1 meter)
15" x 15" x 3 7/8"
(381mm x 381mm x 98mm)
12 3/4" x 12 3/4"
(324mm x 324mm)
Perforated steel
13 lbs (6kg) each
SKU 92951
Each
©2013 Sonance. All rights reserved.
Sonance, Visual Performance and Roto-Lock, are registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product specification information visit our website: www.sonance.com
SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672-7531 USA
[phone] or [phone] • FAX: [phone] • Technical Support: [phone]
www.sonance.com
VP10SUB AMPLIFIER LIMITED FIVE (5) YEAR WARRANTY
Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance
Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted
for five (5) years. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product
or a reasonable equivalent.
Please visit our website and owner’s e-Manual for complete warranty and exclusion information.
07.10.13
VP10SUB LIMITED LIFETIME WARRANTY
Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance
Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted
for five (5) years. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product
or a reasonable equivalent.