Sonesta 6210 User manual

Unpacking and assembly instructions
Model
6210

UNPACKING INSTRUCTIONS 6210
Required tools and capacity for unpacking
One scissor One powerdrill with a
philips head screw tip
The unpacking includes mo-
ments of heavy lifting which re-
quires four people

UNPACKING INSTRUCTIONS 6210
Unpacking and assembly
Step 1: Uncrating the crate
Start by removing the screws at the top of the crate.
Cut off the straps surrounding the crate.
Carefully lift off the top of the crate.
Move on by removing the screws at the side of the crate that
is marked out with an attention slip (shown to the right) and lift
off the side.
Unscrew the remaining screws on the remaining sides of the
pallet and lift of the sides.

UNPACKING INSTRUCTIONS 6210
Step 2: Remove the plastic
Gently remove the plastic which surrounds and seals the table, be careful
when doing this since there are mattresses beneath the plastic.
Step 3: Unwrap and remove loose articles
The crate comes with articles that are not assembled to the
table, carefully remove these articles and set them aside.
The crate will contain the following loose articles:
- One protective cover for the frame
- One arm rest for the right side of the table.

UNPACKING INSTRUCTIONS 6210
Step 4: Install the right arm rest
Locate the arm rest holder on the right side of the table.
Loosen the holder by turning the black handle counterclockwise.
Press the metal end of the arm rest into the hole on the arm rest holder
and tighten the handle into position.
To move the arm rest along the metal railing, loosen the black handle at the
bottom of the holder, place the arm rest where you want it and tighten the
handle into position.
Step 5: Remove the plastic cover on the squeeze protection
Carefully peel off the white protective plastic on the squeeze protection on
the left-hand side of the table.

UNPACKING INSTRUCTIONS 6210
Step 6: Install the protective cover
Gently click the protective cover into position on the left side of the table’s
base in between the legs.

UNPACKING INSTRUCTIONS 6210
Step 7: Remove the table from the pallet
Carefully cut off the straps that hold the table in place on the pallet.
Unlock the brakes on the four wheels of the table to allow the wheels to
be freely moved once placed on the floor.
To lift the table from the pallet, our suggestion is to have four peo-
ple help lift the table from the pallet of the frame above the wheels, as
shown in the pictures to the right.
ATTENTION!
Do NOT lift the table off the pallet from another location than shown in
the pictures to the right.

UNPACKING INSTRUCTIONS 6210
SONESTA MEDICAL AB
INDUSTRIVÄGEN 7
171 48 SOLNA, SWEDEN
[phone]
[e-mail]
[e-mail]
WWW.SONESTAMEDICAL.SE
SONESTA MEDICAL INC
2 DEBUSH AVENUE UNIT C3
MIDDLETON; MA 01949, USA
+ 1 630-519-3450
[e-mail]
[e-mail]
WWW.SONESTAMEDICAL.SE
An ADDvise Group Company