Sony Ericsson Label Make II Instruction sheet

Company Internal
Rev 1
Label Make II
Install guideline
Client handbook

Company Internal
Rev 2
To be able to run Labelmake II you have to have a service card installed
on the pc, the same as for EMMA II. (hardlock is not required).
To install Labelmake II use this link:
http://emma.extranet.sonyericsson.com/labelmake/
Click on Install and follow the instructions.

Company Internal
Rev 3

Company Internal
Rev 4
Click
Install !

Company Internal
Rev 5
Click on
download !!

Company Internal
Rev 6
Choose
Open.

Company Internal
Rev 7
Accept the
terms and click
Next >

Company Internal
Rev 8
Choose
Typical
and click
Next >

Company Internal
Rev 9
This part may take several minutes.
So please be patient.

Company Internal
Rev 10
Click
Finish
To exit
the wizard.
Click
Home

Company Internal
Rev 11
To start the
Labelmake II
Client
Click either
the button or
printer logo

Company Internal
Rev 12
Click Start to continue.

Company Internal
Rev 13

Company Internal
Rev 14
This empty page is your first acquaintance with Label Make II
Now let see how to print a label……..

Company Internal
Rev 15
One of the new thing with LM2 is that the search is done by the TACnr
the six first digits in IMEInr ID:
Enter the first set of digits (TAC) from the IMEI number
shown on the product label. The TAC may contain six or
eight numbers. The TAC may be typed into the field or
entered by scanning the barcode.

Company Internal
Rev 16
Use the dropdown menu to remove the 22S or S
prefix
And then set……..
Set this field
to prevent the extra
characters from entering
the "ID" field.
Some barcode scanners insert a "22S" or "S" in front
of the scanned number. With these characters in front of the
number, the search
function will not be able to find the correct label in the database.

Company Internal
Rev 17
…the Number of characters in field.
Number of chars in field:
Selecting a number from this field determines how many
characters will be allowed in the "ID" field. If the TAC has six characters, then
select 6. If the TAC has eight characters, then select 8. Be careful. If 6 is
selected, but a TAC with eight characters is scanned, the last two characters will
not show in the "ID" field and the search function may not be able to find the label in the database.
You could of course type in the TACnr. Manually and
click on Search button
TACnr

Company Internal
Rev 18
After the search you will find Available labels to choose from.
- Click on the one you need to print.
Offline or Online:
Select the "Offline" option to search the labels that have
already been downloaded. Be careful. Using the "Offline" option for long periods
of time may cause updated labels to be missed. Select the "Online" option to search
the latest labels in the database and have them downloaded. This option may take
longer if there are many different labels for a product model.

Company Internal
Rev 19
Choose
your label,
and some
fields will
appear

Company Internal
Rev 20
Label Fields: The label fields that appear for the selected label must all be populated with the correct information from
the product label. Position the curser over the field to see a help note appear on the screen. The help notes describe
the type of information that goes in the fields. Click on the button beside each field to reset the field, or click on the
"Reset all" button to reset all of the fields. The "Repair Week" field is automatically populated and cannot be edited.
Print on ... on comX: After entering data in all of the label fields, click this button to print the label. The "Alt + F1"
keyboard shortcut can be used instead of clicking this button.