Sony ICF-C102 User manual

ICF-C102/C150
FM/AM DIGITAL CLOCK RADIO
Ver 1.1 2002.10
9-956-812-12
2002J0200-1
© 2002.10
Sony Corporation
Personal Audio Company
Published by Sony Engineering Corporation
SERVICE MANUAL
US Model
Canadian Model
ICF-C150
AEP Model
Australian Model
ICF-C102
E Model
ICF-C102/C150

– 9 –
ICF-C102/C150
SECTION 5
EXPLODED VIEWS Ver 1.1 2002.10
NOTE:
•-XX, -X mean standardized parts, so they may have
some difference from the original one.
•The constrution parts of an assembled part are in-
dicated with a collation number in the remark col-
umn.
•Color indication of Appearance Parts
Example :
KNOB, BALANCE (WHITE) ••• (RED)
↑↑
Parts color Cabinet's color
•Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•The mechanical parts with no reference number in
the exploded views are not supplied.
•Hardware (# mark) list and accessories and pack-
ing materials are given in the last of this parts list.
The components identified by mark !or
dotted line with mark !are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
!sont critiques pour la sécurité.
Ne les remplacer que par une piéce portant le
numéro spécifié.
•Abbreviation
AUS:Australian
CND : Canadian
C&SA : Central & South America
When indicating parts by reference number,
please include the board name.

– 10 –
Ver 1.1 2002.10 SECTION 9
ELECTRICAL PARTS LIST
NOTE:
•Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
•-XX, -X mean standardized parts, so they
may have some difference from the original
one.
•RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
•Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
• SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
•CAPACITORS:
uF: µF
•COILS
uH: µH
•Abbreviation
AUS:Australian
CND : Canadian
C&SA : Central & South America
The components identified by mark !or
dotted line with mark !are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
!sont critiques pour la sécurité.
Ne les remplacer que par une piéce portant le
numéro spécifié.
When indicating parts by reference
number, please include the board
name.
CLOCK KEY
ICF-C102/C150

– 11 –
Ver 1.1 2002.10

– 12 –
The components identified by mark !or
dotted line with mark !are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
!sont critiques pour la sécurité.
Ne les remplacer que par une piéce portant le
numéro spécifié.
Ver 1.1 2002.10

– 13 –
ICF-C102/C150
Printing the page that exceeds A4-size two pages (or letter size) is possible by specifying the print range.
(Acrobat Reader Version 4.0 or later)
1. The enlarged print is made, if a smaller range than A4 size is specified and the A4 size is selected as a
print paper.
2. Almost real sized print is made, if the range is specified, meeting the print paper size.
3. The reduced print is made, if a larger range than the print paper size is specified.
Printing by Specifying a Range
In printing out the drawings such as a schematic diagram and a printed wiring board larger than the printed
paper size, they can be printed by specifying the range. (Acrobat Reader Version 4.0 or later)
1. Display the page to be printed.
2. From the File menu, select [Page Setup] and set the paper size.
3. From the Command bar, select [Graphic Select Tool].
(Keep pressing
T
, select )
4. Dragging the cursor, enclose the range on the page to be printed.
5. From the File menu, select [Print] and make sure that the [Selected Graphic] is already checked. Also, if
[Fit to page] is checked, the selected range is enlarged or reduced (and rotated as necessary) meeting the
paper size.
6. To cancel the printed range, click an arbitrary position on the screen.
Printing Method for Large Sized Documents Such As Circuit Diagrams
@
!

ICF-C102/C150
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.
Ver. Date Description of Revision
1.0 1991.12 AEP, US, Canadian (9-956-812-11)
1992.04 AEP, Australian, E (9-956-812-31)
1.1 2002.10 Two above manuals are integrated. (SPM-02047)