Sony Cyber-shot DSC-HX10 User manual

SONY
4-424-143-11 (
1)
Digital Still Camera I Instruction Manual GB
Camara fotografla digital I Manual de instrucciones
ES
m
lnfoLITHIU~
Q
~~
-
cLASs@:
Cyber-shot
MEMORY
5TI(K
TM
DSC-HX1
O/HX1
OV

GB
2
English
Learning more about the camera ("Cyber-shot
User Guide")
,---~~
"Cyber-shot
User
Guide"
is an on-line manual.
Refer
to it for
in-depth instructions
on
the
many
functions
of
the
camera.
G)
Access
the
Sony
support
page.
http://www
.sony
.net/Sony
Info/Support/
......__""""
,....----'~
®
Select
your
country
or
region.
®
Search
for
the
model
name
of
your
camera
within the
support
page.
•
Check
the model
name
on the
bottom
of
your
camera.
Checking the supplied items
The
number
in
parentheses
indicates the
number
of
pieces.
•
Camera
(I)
•
Rechargeable
battery
pack
NP-
BG
I
(1
)/Battery
case
(I)
•
Micro
USB
cable
(
1)
•
AC
Adaptor
AC-UBIO/UBIOB
(1)
•
Power
cord
(mains
lead)
(not
supplied
in the
USA
and
Canada)
(I)
• Wrist strap (
1)
• Instruction
Manual
(this
manual)
(1)

Owner's Record
The model and serial numbers are located on the bottom. Record the serial number in the
space provided below. Refer to these numbers
whenever you call your Sony dealer
regarding this product.
Model No.
DSC-HX I 0/DSC-HX I OY
Serial No.
Model No.
AC-UB 10/AC-UB JOB
Serial No.
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or
moisture.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the
proper configuration for the power outlet.
CAUTION
Battery pack
If the battery pack is mishandled, the battery pack can burst cause a fire or even chemical
burns.
Observe the following cautions.
•
Do not disassemble.
•
Do not crush and do not expose the battery pack to any shock or force such as
hammering, dropping or stepping on it.
•
Do not short circuit and do not allow metal objects to come into contact with the battery
terminals.
•
Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a
car parked in the sun.
•
Do not incinerate or dispose of in fire.
•
Do not handle damaged or leaking lithium ion batteries.
GB
GB
3

GB
4
• Be sure to charge the battery pack using a genuine Sony battery
charger
or
a device that
can charge the battery pack.
• Keep the battery pack out
of
the reach
of
small children.
• Keep the battery pack dry.
• Replace only with the
same
or
equivalent type recommended by Sony.
• Dispose
of
used battery packs promptly as described
in
the instructions.
AC
Adaptor
Connect
the AC Adaptor to the nearest wall outlet (wall socket).
If
some
trouble occurs while using the AC Adaptor, immediately shut
off
the power by
disconnecting the plug from the wall outlet (wall socket).
The
power
cord (mains lead),
if
supplied, is designed specifically for use with this
camera
only, and should not be used with
other
electrical equipment.
For
Customers
in
the
U.S.A.
and
Canada
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve
our
environment
by returning
your
used
rechargeable batteries to the collection and recycling location nearest
you.
For
more information regarding recycling
of
rechargeable batteries,
call toll free
1-800-822-8837,
or
visit http://www.rbrc.org/
Caution:
Do
not handle
damaged
or
leaking Lithium-Ion batteries.
!!
Battery pack
This device
complies
with Part
15
of
the FCC Rules. Operation is subject to the following
two
conditions:
(I)
This device may not
cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause u-ndesired operation.
This Class B digital apparatus complies with
Canadian
ICES-003.

For
Customers
in
the
U.S.A.
UL
is
an internationally recognized safety organization.
The UL Mark on the product means
it
has been UL Listed.
If you have any questions about this product, you may call:
Sony
Customer
Information Center
1-800-222-SONY (7669).
The number below
is
for the FCC related matters only.
Regulatory Information
Declaration of Conformity
Trade Name:
SONY
Model No.: DSC-HXIOV
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego,
CA
92127 U.S.A.
Telephone No.: 858-942-2230
·This device complies with Part
15
of
the FCC Rules. Operation is subject to the
following two conditions:
(I)
This device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause
undesired operation.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part
15
of
the
FCC
Rules.
These
limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and,
if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If
this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment
off
and on, the user is encouraged to try to correct the interference by one
or
more
of
the following measures:
-Reorient
or
relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
GB
The
supplied interface cable must be used with the
equipment
in
order
to comply with the
G
5
B
limits for a digital device pursuant to Subpart B
of
Part
15
of
FCC Rules.

For
Customers
in
Canada
This
device
complies
with RSS-31 0
of
Industry Canada.
Operation
is
subject to the
condition that this device does not cause harmful interference.
For
Customers
in
Europe
CE:
Hereby,
Sony
Corporation. declares that this
DSC-HX
I
OV
Digital Still
Camera
is in
compliance
with the essential requirements and
other
relevant provisions
of
the Directive
1999/5/EC.
For
details, please access the following URL:
http://www.compliance.sony.de/
Notice for the customers
in
the countries applying
EU
Directives
The
manufacturer
of
this product
is
Sony
Corporation, 1-7-1 Konan Minato-ku
Tokyo
,
I
08-0075 Japan.
The
Authorized Representative for
EMC
and product safety is
Sony
Deutschland
GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart,
Germany.
For
any service
or
guarantee matters please refer to the addresses given in separate service
or
guarantee
documents.
This
product has been tested and found
compliant
with the limits set
out
in
the
EMC
regulation for using connection cables shorter than 3 meters (9.8 feet).
[i
Attention
The
electromagnetic
fields at the specific frequencies may influence the picture and sound
of
this unit.
Notice
If
static electricity
or
electromagnetism
causes
data
transfer to discontinue
midway
(fail),
restart the application
or
disconnect
and
connect
the
communication
cable
(USB, etc.)
again.
Disposal of Old Electrical
&
Electronic Equipment (Applicable
in
the European Union and other European countries with separate
collection systems)
This symbol on the product
or
on its
packaging
indicates that this product
shall not be treated as household waste. Instead it shall be
handed
over
to
the applicable collection point for the recycling
of
electrical and electronic
equipment. By
ensuring
this product is
disposed
of
correctly, you will help
prevent potential negative
consequences
for the
environment
and
human
-
health, which
could
otherwise be
caused
by inappropriate waste handling
of
this product.
The
recycling
of
materials will help to conserve natural
resources.
For
more detailed information about recycling
of
this product.
GB
please contact
your
local Civic Office, your household waste disposal service
or
the shop
6 where you
purchased
the product.

!
Disposal of waste batteries (applicable
in
the European Union
and other European countries with separate collection systems)
This
symbol on the battery
or
on the
packaging
indicates that the battery
provided
with this
product
shall not be
treated
as
household
waste.
On
certain batteries this symbol
might
be used in
combination
with a
chemical
symbol.
The
chemical
symbols
for
mercury
(Hg)
or
lead (Pb) are
added
if
the battery
contains
more than
0.0005%
mercury
or
0.004
% lead.
By
ensuring
these batteries are
dispo
s
ed
of
correctly,
you
will help
prevent
potentially
negative
consequences
for the
environment
and
human
health
which
could
otherwise
be
caused
by inappropriate waste
handling
of
the
battery.
The
recycling
of
the GB
materials will help to
conserve
natural resources.
In
case
of
products
that for safety,
performance
or
data
integrity
reasons
require a
permanent
connection
with an incorporated battery, this battery
should
be replaced by
qualified
service
staff
only.
To
ensure
that the battery will be treated properly,
hand
over
the
product
at
end-of-life
to the applicable collection
point
for the
recycling
of
electrical
and
electronic
equipment.
For
all
other
batteries, please view the section
on
how
to
remove
the battery from the
product
safely.
Hand
the battery
over
to the applicable collection
point
for
the
recycling
of
waste batteries.
For
more
detailed
information
about
recycling
of
this
product
or
battery, please
contact
your
local
Civic
Office
,
your
household
waste disposal
service
or
the s
hop
where
you
purchased
the product.
Notice
for
customers
in
the
United
Kingdom
A
moulded
plug
complying
with
BS
1363 is fitted to this
equipment
for
your
safety and
convemence.
Should
the fuse in the
plug
supplied need to be
replaced
, a fuse
of
the
same
rating as the
supplied
one
and
approved
by
ASTA
or
BSI
to
BS
1362, (i.e
..
marked
with an
<@>
or~
mark)
must
be
used.
If
the
plug
supplied
with this
equipment
has a
detachable
fuse
cover
, be sure to attach the
fuse
cover
after
you
change
the fuse.
Never
use the
plug
without
the fuse cover.
If
you
should
lose the fuse
cover
, please
contact
your
nearest
Sony
s
ervice
station.
GB
7

Identifying parts
[1]1------..
[2]
~~---~~
,--------~
[4Jf----+-++--
~,__riD
GB
8
[1]
Shutter button
[2]
Mode dial
iO
(Intelligent Auto)/
iO+
(Superior Auto)/
4£ (Background Defocus)/
p
(Program Auto
)/SCN
(Scene
Selection)~
(Manual Exposure
Shooting)/it::l
(iSweep
Panorama)/U
(Movie Mode)/
BI!]
(3D Shooting)
~
For shooting:
WIT
(Zoom) lever
For viewing:
~
(Index) lever/
0.
(Playback zoom) lever
@]
Self-timer lamp/Smile Shutter
lamp/
AF
illuminator
[§]
ON/OFF (Power) button
[ill
Power/Charge lamp
[1]
Speaker
ffi]
Flash
• Do not hold
your
fingers near the
flash.
• When using the flash, the flash
pops up automatically.
• The flash goes down
automatically when the power is
turned off, the camera is switched
to playback mode or the shooting
mode
is changed.
[ID
Microphone
[Q]
Lens
[j]
LCD screen
[12]
GPS sensor (built-in, DSC-
HXIOV only)
~
[E
(Playback) button
[H)
MOVIE (Movie) button
[ffi]
HDMI
mini
jack
[§]
Hook for wrist strap
[Z]
Control wheel

[ill]
?
lfiii
(In-Camera
Guide/Delete)
button
[Nl
MENU
button
[2Q]
Tripod
receptacle
• Use a tripod with a screw less
than 5.5 mm
(7
/32 inches) long.
Otherwise, you cannot firmly
secure the camera, and damage to
the camera may occur.
12..1]
Micro
USB
connector
[2g]
p-
(TransferJet™)
mark
~
Memory
card
slot
~
Battery/memory
card
cover
[g§]
Battery
eject
lever
~
Battery
insertion slot
[gZj
Access
lamp
Inserting the battery pack
.-.CD
~
LOCK
OPEN
1
Open
the
cover.
2
Insert
the
battery
pack.
•
While
pressing
the battery
eject
lever,
insert
the
battery
pack
as
illustrated.
Make
sure
that the
battery
eject
lever
locks
after
insertion.
•
Closing
the
cover
with
the
battery
inserted
incorrectly
may
damage
the
camera.
GB
GB
9

GB
10
Charging the battery pack
For customers
in
the USA
and Canada
Power cord
'~,.
(Mains lead)
For customers
in
countries/regions
other than the USA and Canada
Power/Charge lamp
Lit: Charging
Off: Charging finished
Flashing:
Charging error
Charging paused due to
overheating
1
Connect
the
camera
to
the
AC
Adaptor
(supplied),
using
the
micro
USB
cable
(supplied).
2Connect
the
AC
Adaptor
to
the
wall
outlet
(wall
socket).
The
Power/Charge lamp lights orange, and charging starts.
• Turn
off
the
camera
while charging the battery.
• You can charge the battery pack even when it is partially charged.
• When the Power/Charge lamp flashes and
charging
is not finished,
remove and re-insert the battery pack.

I~Mi4J
• If the Power/Charge lamp on the camera flashes when the AC Adaptor is
connected to the wall outlet (wall socket), this indicates that charging is
temporarily stopped because the
temperature is outside the recommended range.
When the temperature gets back within the appropriate range, the charging
resumes.
We recommend charging the battery pack in an ambient temperature of
between I ooc to 30°C (50°F to 86°F).
•
The battery pack may not be effectively charged if the terminal section of the
battery is dirty. In this case, wipe any dust
off lightly using a soft cloth or a cotton GB
swab to clean the terminal section of the battery.
•
Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall
outlet (wall socket)
immediately to disconnect from the power source.
•
When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).
• Be sure to use only
genuine Sony brand battery packs, micro USB cable (supplied)
and AC Adaptor (supplied).
Charging time {Full charge)
The charging time is approximately 175 min. using the AC Adaptor
(supplied).
•~mffi
• The above charging time applies when charging a ful-ly depleted battery pack at a
temperature of 25°C (77°F). Charging may take longer depending on conditions of
use and circumstances.
GB
11

GB
12
Ii~!
Charging by connecting to a computer
The
battery pack can be
charged
by
connecting
the
camera
to a
computer
using
a micro USB cable.
I~Mij
• Note the following points when charging via a computer:
-If
the
camera
is
connected
to a laptop
computer
that is not
connected
to a
power
source, the laptop battery level decreases.
Do
not charge for an extended period
of
time.
-Do
not turn
on/off
or
restart the computer,
or
wake the
computer
to
resume
from
sleep
mode
when a
USB
connection has been established between the
computer
and the camera. The
camera
may
cause
a malfunction. Before turning on/off,
or
restarting the
computer
or
waking the
computer
from sleep mode, disconnect the
camera
and the computer.
-No
guarantees are made for charging using a custom-built
computer
or
a
modified computer.

~;:
Battery life and number of images that can be
recorded and played back
Battery
life
Number
of
images
Shooting (still images) Approx. 170 min. Approx. 340 images
Viewing (still images) Approx. 260 min. Approx. 5200 images
Shooting (movies) Approx. 85 min. -
•~G)(iJ
• The above number
of
images applies when the battery pack is fully charged.
The
number
of
images may decrease depending
on
the conditions
of
use.
• The number
of
images that can be recorded is for shooting under the following
conditions:
-Using
Sony
"Memory
Stick
PRO
Duo"
(Mark2) media (sold separately)
-The
battery pack is used at an ambient temperature
of
25°C (77°F).
-[GPS setting] is set to [Off] (DSC-HX I
OV
only).
-[Disp. Resolution] is set to [Standard].
• The number for "Shooting (still images)" is based
on
the
CIPA
standard, and is for
shooting under the following conditions:
(CIPA:
Camera
& Imaging Products Association)
-
DISP
(Display Setting) is set to [ON].
-Shooting once every 30 seconds.
-The
zoom is switched alternately between
theW
and
Tends.
-The
flash strobes once every two times.
-The
power turns on and
off
once every ten times.
• The battery life for movies applies shooting under the following conditions:
-Movie
quality: AVC HD HQ
-When
continuous shooting ends because
of
set limits (page 25), press the
MOVIE
(Movie) button again and continue shooting. Shooting functions such as
the zoom
do
not operate.
GB
GB
13

GB
'fi
Supplying power
The
camera
can
be
supplied
with
power
from
the wall
outlet
(wall
socket)
by
connecting
to the
AC
Adaptor,
using the
micro
USB
cable
(supplied).
You
can
import
images
to a
computer
without
worrying
about
draining
the
battery
pack
by
connecting
the
camera
to a
computer
using the
micro
USB
cable.
In addition,
you
can use the
AC
Adaptor
AC-UDlO
(sold
separately)
for
shooting
to
supply
power
when
shooting.
•~Mi4J
•
Power
cannot
be
supplied
when
the battery pack is not inserted in the
camera.
•
When
the
camera
is
connected
directly to a
computer
or
to a
power
outlet
using the
supplied
AC
Adaptor
A
C-UB
1
0/UB
1
OB,
power
supply
is
available
only
in
playback
mode.
If
the
camera
is in
shooting
mode
or
while
you are
changing
the
settings
of
the
camera,
power
is not
supplied
even
if
you
make
a
USB
connection
using
the
micro
USB
cable.
•
If
you
connect
the
camera
and
a
computer
using
the
micro
USB
cable
while
the
camera
is in
playback
mode
, the display on the
camera
will
change
from the
playback
screen
to the
USB
connection
screen. Press 1
..,..
1
(Playback)
button
to
switch to the
playback
screen.
Inserting.a memory card (sold separately)
..-CD
~
LOCK
OPEN
1
Open
the
cover.
Ensure the notched corner
faces correctly.
2
Insert
the
memory
card
(sold
separately).
•
With
the
notched
corner
facing as illustrated,
insert
the
memory
card
until it
clicks
into place.
3
Close
the
cover.
14------------
----
----
----
----

1!
Memory cards that can be used
Memory card For still images For movies
Memory
Stick PRO
Duo
0 0
(Mark2 only)
A
Memory
Stick PRO-HG Duo
0 0
Memory
Stick Duo
0
-
Memory
Stick Micro (M2)
0
-
8
Memory
Stick Micro (Mark2)
0 0
SD
memory
card.
0 0
(Class 4 or faster)
c
SDHC
memory card
0 0
(Class 4
or
faster)
SDXC
memory
card
0 0
(Class 4
or
faster)
microSD
memory card
0 0
(Class 4 or faster)
D
microSDHC
memory card
0 0
(Class 4 or faster)
•
In
this manual, the products
in
the table are collectively referred to as follows:
A:
''
Memory
Stick
Duo"
media
8:
"
Memory
Stick Micro" media
C:
SO
card
D:
microSD
memory card
I~Mtj
•
When
using
"Memory
Stick
Micro"
media
or
microSD
memory cards with this
camera,
make
sure to use with the appropriate adaptor.
To remove the memory card/battery pack
Memory
card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
•~M¢1
•
Never
remove the memory card/battery pack when the access lamp (page
8)
is
lit.
This
may cause
damage
to data
in
the
memory
card/internal memory.
GB
GB
15

GB
16
Setting the clock
,....----
Power/Charge lamp (green)
Control wheel
Select items:
~/lff
/""4/~
Set the numeric value
of
date and
time:
'IJ
Set: e
1
Press
the
ON/OFF (Power)
button.
Date &
Time
setting is displayed when you turn on the camera for the first
time.
•
It
may take time for the
power
to turn on and allow operation.
2
Select a
desired
language.
3
Select a
desired
geographic
location
by
following
the
on-screen
instructions,
then
press
e
on
the
control
wheel.
4Set [Date &Time
Format],
[Daylight
Savings]
or
[Summer
Time]
and
[Date &
Time],
then
select
[OK]--.
[OK].
•
Midnight
is indicated as 12:00 AM, and noon as 12:00 PM.
5
Follow
the
instructions
on
the
screen.
•
The
battery pack will run out quickly when:
-[GPS setting] is set to [On] (DSC-HXlOV only).
-[Disp. Resolution] is set to [High].

Shooting still images/movies
Mode dial
iO:
Intelligent
Auto
lt:]:
Movie
Mode
Shooting still images
Shutter button
W:
zoom
out
T:
zoom
in
Do not cover the flash (A).
1
Press
the
shutter
button
halfway
down
to
focus.
When
the
image
is in
focus,
a
beep
sounds
and
the
e
indicator
lights.
2
Press
the
shutter
button
fully
down
to
shoot
an
image.
Shooting movies
1
Press
the
MOVIE
(Movie)
button
to
start
recording.
•
Use
the
W/T
(zoom)
lever
to
change
the
zoom
scale.
•
Press
the
shutter
button
to
shoot
still
images
while
continuing
to
record
the
movie.
2
Press
the
MOVIE
button
again
to
stop
recording.
I~Mi{j
•
Do
not
push
down
or
pull up the t1ash manually.
This
may
cause
a malfunction.
•
The
sound
of
the lens and lever operating will
be
recorded when the zoom function
operates while shooting a movie.
The
sound
of
the
MOVIE
button operating may
also be recorded when movie recording
is
finished.
• Continuous shooting
is
possible for approximately 29 minutes at one time at the
camera's
default settings and when the temperature is approximately 25°C (77°F).
When
movie recording is finished, you can restart recording by pressing the
MOVIE
button again. Recording may stop to protect the
camera
depending on the
ambient temperature.
GB
GB
17

GB
18
Viewing images
. •
o~D
~~u
[E
(Playback)
~
?
;ffij
(Delete)
W: zoom out
T: zoom in
Control wheel
Select images:
~(next)/~
(previous)
or
turn
the control wheel
Set: e
1
Press
the
[E
(Playback)
button.
•
When
images on a
memory
card recorded with
other
cameras are played
back
on this camera, the registration screen for the
data
file appears.
Selecting next/previous image
Select an image by pressing
~
(next)/~
(previous) on the control wheel
or
by
turning the control wheel. Press e in the center
of
the control wheel to view
movies.
Deleting an image
G)
Press?
Jfiij
(Delete) button.
®
Select
[This Image] with
.&
on the control wheel, then press
e.
Returning to shooting images
Press the shutter button halfway down.

In-Camera Guide
This camera is equipped with a built-in instruction guide. This allows you to
search the
camera's functions according to your needs.
f--- ? ;fiij (In-Camera Guide)
MENU
1 Press the MENU button.
2Select the desired MENU item, then press the ?/fffi (In-
Camera Guide) button.
The operation guide for the selected item is displayed.
•
If you press the? ;fffi (In-Camera Guide) button when the MENU screen
is not displayed, you can search the guide using
keywords or icons.
Introduction of other functions
Other functions used when shooting or playing back can be operated using the
control wheel
or MENU button on the camera. This camera is equipped with a
Function Guide that allows you to easily select from the functions. While
displaying the guide, you can use various functions.
Control wheel
~(~ ]l g'~·,.·,·,.' ... ·',.·',,~',.',,'.,'·p !1> $
~r~ ~
MENU
Forprints up to A3(11x17")
Function Guide
GB
GB
19

GB
20
Control wheel
DISP
(Display
Setting):
Allows
you to
change
the
screen
display.
\9
/~
(Cont.
Shooting/Self-
Timer):
Allows
you
to use the
self-timer
and
burst
shooting
mode.
~~
(Photo
Creativity):
Allows
you
to
change
[Brightness
I,
I
Color],
[Vividness]
and
[Picture Effect]
when
shooting
mode
is set to [Intelligent
Auto]
or
[Superior
Auto
1.
t (Flash):
Allows
you
to select a flash
mode
for
still
images.
Center
button
(Tracking
focus):
The
camera
tracks the
subject
and
adjusts
focus
automatically
even
when
the
subject
is
moving.
Menu Items
Shooting
Movie shooting
scene
30
Shooting
Picture Effect
Scene Selection
Easy Mode
Defocus Effect
Still Image
Size(Dual Rec)
Still Image Size/
Panorama Image
Size/Movie Size/
Movie Quality
HDR Painting
effect
Area of emphasis
Color hue
Select
movie
recording mode.
Select the
3D
image shooting mode.
Shoot
a still image with an original texture
according
to
the desired effect.
Select pre-set settings to
match
various scene conditions.
Shoot
still images using minimal functions.
Set the level
of
background
defocus
effect when
shooting in
Background
Defocus
mode.
Set
the still image size shot while recording a movie.
Select the image size and the quality for still images,
panoramic images
or
movie
files.
When
[HDR
Painting] is selected in Picture Effect, sets
the effect level.
When
[Miniature] is selected
in
Picture
Effect
, sets the
part to focus on.
When
[Toy camera] is selected in Picture Effect, sets the
color
hue.