Sony Cyber-shot DSC-QX10 User manual

4-480-203-11(1) SONY_ SONY_
bq
Digital Still Camera _ Digital Still Camera
v
_-_ Appareil photo num_fique/Digitale Fotokamera/
Camara fotografia digital/Fotocamera digitale/
,C) Digitale camera/C_mara fotogr_fica digital/
oOX Elxl_Digitalstillbildskamera/L_Hd_poBo__nll_/i_,2N_ll_,_¢oToannapaT/ 1
IIIIIIIIIII
4480203110
©2013 Sony Corporation _ LITHIUMION
MEMORY 5TIEK ,r_ _Y_
Printed in China
4-480-203-11(1)
micro ,_

I|lk'11111[ll|[I]ll_J_|l|l_ll
PlayMem°[!,es
You can download the image management software "PlayMemories Home"
from the following URL.
http://www.sony.net/pm/
Owner's Record
The model and serial numbers are located on the back. Record the serial
number in the space provided below. Refer to these numbers whenever you
call your Sony dealer regarding this product.
Model No. DSC-QXIO/DSC-QXIO0
Serial No.

!
TOreduce fire or shock hazard, do not expose the unit to rain or moisture.
Battery pack
If the battery pack is mishandled, tile battery pack carl burst, cause a fire or
even chemical burns. Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such
as hammering, dropping or stepping on it.
• Do not short circuit and do not allow metal objects to come into contact with
the battery terminals.

•Do not expose to high temperature above 60°C (140°F) such as in direct
sunlight or in a car parked in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium ion batteries.
• Be sure to charge the battery pack using a genuine Sony battery charger or
a device that can charge the battery pack.
• Keep the battery pack out of the reach of small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type recommended by Sony.
• Dispose of used battery packs promptly as described in the instructions.
AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor.
Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if
any malfunction occurs while using the apparatus.

Hereby,SonyCorporation,declaresthatthisDSC-QXIO/QXIO0DigitalStill
Cameraisincompliancewiththeessentialrequirementsandotherrelevant
provisionsofDirective1999/5/EC.Fordetails,pleaseaccessthefollowingURL:
http://www.compliance.sony.de/
Notice for the customers in the countries applying EU Directives
Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan
For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany

Notice
If static electricity or electromagnetism causes data transfer to discontinue
midway (fail), restart the application or disconnect and connect the
communication cable (USB, etc.) again.
This product has been tested and found compliant with the limits set out in
the EMC regulation for using connection cables shorter than 3 meters (9.8
feet).
The electromagnetic fields at the specific frequencies may influence the
picture and sound of this unit.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that
this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve
natural resources. For more detailed information about recycling of this
product, please contact your local Civic Office, your household waste disposal
service or the shop where you purchased the product.

Disposal of waste batteries (applicable in the European Union and other
European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that
the battery provided with this product shall not be treated as
household waste.
On certain batteries this symbol might be used in combination
with a chemical symbol. The chemical symbols for mercury (Hg)
or lead (Pb) are added if the battery contains more than 0.0005% mercury or
0.004% lead.
By ensuring these batteries are disposed of correctly, you will help prevent
potentially negative consequences for the environment and human health
which could otherwise be caused by inappropriate waste handling of the
battery. The recycling of the materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons
require a permanent connection with an incorporated battery, this battery
should be replaced by qualified service staff only.

Toensurethatthebatterywillbetreatedproperly,handovertheproductat
end-of-lifetotheapplicablecollectionpointfortherecyclingofelectricaland
electronicequipment.
Forallotherbatteries,pleaseviewthesectiononhowtoremovethebattery
fromtheproductsafely.Handthebatteryovertotheapplicablecollection
pointfortherecyclingofwastebatteries.
Formoredetailedinformationaboutrecyclingofthisproductorbattery,
pleasecontactyourlocalCivicOffice,yourhouseholdwastedisposalservice
ortheshopwhereyoupurchasedtheproduct.
I Complies with ]
IDA Standards
DB00353

About the camera
The camera is designed to be
connected to a smartphone via
Wi-Fi, You can transfer images
to a smartphone on the spot just
after shooting.
Check the supplied items
• Rechargeable battery pack NP-BN
(1)
• Micro USB cable (1)
• Wrist strap (1)
• Smartphone attachment (1)
• Instruction Manual (this manual) (1)
Name of main parts
[_ Power button
[_ Microphone
[_ Display panel
: Indicates memory card not
inserted
__11J]: Indicates remaining battery
capacity
[_ Hook for strap
_ Tripod socket
Control ring (DSC-QXIO0)

%Power/Charge/Movielamp _.........._'_.-_
Green:PowerON ___
Orange:Charging
Red:Recordingamovie
%Zoomlever
%Shutterbutton []_J___3
_]Multiterminal DSC-QXIO
_]RESETbutton
\
[]
DSC-QXIO0
11

Charging the battery
Charge the battery before using
the camera. To charge, use the
micro USB cable (supplied)
to connect the camera to a
computer.
• Turn off the power when the
battery is being charged.
• If you do not have a computer,
use the AC adaptor AC-UD10 or
AC-UD11 (both sold separately). The
AC-UD11 (sold separately) may not
be available in some countries/
regions.
Batter,
12

Inserting a memory card
Insert a microSD memory card or "Memory Stick Micro" (M2) media
before shooting.
DSC-QXIO
microSD
memory
card
Printed side Terminal side
DSC-QXIO0 Printed side Terminal side
13

Installing "PlayMemories Mobile"
Install "PlayMemories Mobile"
to the smartphone before using
the camera. If"PlayMemories
Mobile" is already installed,
update it to the latest version.
PlayMemor!es
For details on
"PlayMemories Mobile", []
refer to the support
website
http://www.sony.net/
prom/
•Android
Search for "PlayMemories Mobile"
from Google Play and install it.
• iPhone
Search for "PlayMemories Mobile"
from App Store and install it.
14

Connecting the camera and a smartphone
via Wi-Fi
The connection method varies
depending on the type of
smartphone, Confirm your
smartphone type and connect
via Wi-Fi.
(_ Input the password, as printed on
the same label (first time only).
I r-,_i_l
0 Turn on the power of the camera.
Q Start "PlayMemories Mobile" on
the smartphone.
® Select the SSID, as printed on the
inside of the camera's battery
cover or on the cover of this
manual.
Continued 15

Connecting the camera and a smartphone via Wi-Fi (continued)
®
Power button
_L OIIO. O "!
®
®
®
0 Touch the _(N mark) of the
smartphone against the N Mark of
the camera.
Powered on: Continue to touch
(1-2 seconds) without moving
until "PlayMemories Mobile"
starts up.
Powered off: Keep the camera
and a smartphone touching until
the lens of the camera extends.
[]
16

O Turn on the power of the camera.
Q On the smartphone, select
[Settings], then select [Wi-Fi].
(_ Select the SSID, as printed on the
inside of the camera's battery
cover or on the cover of this
manual.
(_) Input the password, as printed on
the same label (first time only).
O Confirm the connection to the
SSID of the camera.
(_ Go back to the Home screen, then
start "PlayMemories Mobile".
®
Power button
®
®
i!_ ............. _l/
Continued 17

Connecting the camera and a smartphone via Wi-Fi (continued)
® ® @
18

Attaching the camera to a smartphone
Attach a smartphone after fixing
the camera to the smartphone
attachment (supplied).
(_) Fix the camera to the attachment.
Put the camera into the slot of the
attachment, aligning the index,
then rotate the attachment until
it clicks.
d)
Sony mark
Smartphone Index (-)
Attachment
Continued 19

Attaching the camera to a smartphone (continued)
(_) Open the clamps of the (_)
attachment.
(_) Extend the clamps and attach a
smartphone.
• Do not swing the camera around
with a smartphone attached to it,
as the smartphone may slip out of
the attachment. (_)
• Make sure no buttons are caught
when the smartphone is attached.