Sony DSC-H1 User manual

SERVICE MANUAL
DIGITAL STILL CAMERA
LEVEL 2
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
Ver 1.0 2005. 04
On the CH-169 and SY-127 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the SY-127 board.
Therefore, schematic diagram, printed wiring board, mounted parts location and electrical parts list of the SY-127 board are not
shown.
The following pages are not shown.
Mounted parts location ............................. Page 4-64
Electrical parts list................................... Pages 5-14 to 5-18
How to use
Acrobat Reader
How to use
Acrobat Reader
Schematic diagram .............................Pages 4-21 to 4-44
Printed wiring board............................Pages 4-55 to 4-60
Waveforms ........................................... Page 4-62
Sony EMCS Co.
2005D1600-1
©2005.4
Published by DITechnical Support Section
9-876-880-31
DSC-H1
DSC-H1
DSC-H1
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Japanese Model
Korea Model
Tourist Model
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-880-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-880-41).
• Reference number search on printed wiring boards is available.
Internal memory
ON BOARD
Internal memory
ON BOARD

—2 —
DSC-H1
SPECIFICATIONS
Camera
[System]
Image device 7.19 mm (1/2.5 type) color
CCD, Primary color filter
Total pixel number of camera
Approx. 5 255 000 pixels
Effective pixel number of camera
Approx. 5 127 000 pixels
Lens 12 zoom lens
f = 6.0 - 72.0 mm (36 - 432 mm
when converted to a 35 mm still
camera)
F2.8 - 3.7
Exposure control Automatic exposure, Shutter
speed priority, Aperture
priority, Manual exposure,
Scene Selection (7 modes)
White balance Automatic, Daylight, Cloudy,
Fluorescent, Incandescent,
Flash, One push
File format (DCF compliant)
Still images: Exif Ver. 2.2
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
Recording media Internal memory 32 MB
“Memory Stick”
Flash Recommended distance (ISO
set to Auto): 0.3 m to 6.8 m
(11 26/32 inches to 22 feet
3 23/32 inches) (W)/0.9 m to
5.2 m (2 feet 11 14/32 inches to
17 feet 23/32 inches) (T)
Viewfinder Electric viewfinder (color)
[Input and Output connectors]
A/V OUT (MONO) jack (Monaural)
Minijack
Video: 1 Vp-p, 75 ,
unbalanced, sync negative
Audio: 327 mV (at a 47 k
load)
Output impedance 2.2 k
USB jack mini-B
USB communication
Hi-Speed USB (USB 2.0
compliant)
[LCD screen]
LCD panel 6.2 cm (2.5 type) TFT drive
Total number of dots
115 200 (480x240) dots
[Finder]
LCD panel 0.75 cm (0.3 type) TFT drive
Total number of dots
115 200 (480x240) dots
[Power, general]
Power HR 15/51:HR6 (size AA)
Nickel-Metal Hydride batteries
(2), 2.4 V
ZR6 (size AA) Oxy Nickel
Primary Battery (2, not
supplied), 3 V
AC-LS5K AC Adaptor (not
supplied), 4.2 V
Power consumption
(during shooting with the LCD screen)
1.8 W
Operating temperature
0°C to +40°C (+32°F to
+104°F)
Storage temperature
–20°C to +60°C (–4°F to
+140°F)
Dimensions 108x81.4x91.2 mm
(4 1/4x 31/4x 35/8 inches)
(W/H/D, excluding maximum
protrusions)
Mass Approx. 590.8 g (1 lb 20.8 oz)
(including two batterries,
shoulder strap, adaptor ring,
lens hood, lens cap, etc.)
Microphone Electret condenser microphone
Speaker Dynamic speaker
Exif Print Compatible
PRINT Image Matching III
Compatible
PictBridge Compatible
BC-CS2A/CS2B Ni-MH battery charger
Power requirements
AC 100 to 240 V, 50/60 Hz,
3 W
Output voltage AA: DC 1.4V 400 mAx2
AAA: DC 1.4 V 160 mAx2
Operating temperature
0°C to +40°C (+32°F to
+104°F)
Storage temperature
–20°C to +60°C (–4°F to
+140°F)
Dimensions Approx. 71x30x91 mm
(2 7/8x 13/16x 35/8 inches)
(W/H/D)
Mass Approx. 90 g (3 oz)
Design and specifications are subject to change
without notice.

—3 —
DSC-H1
1. Check thearea ofyour repairfor unsolderedor poorly-soldered
connections. Checkthe entireboard surfacefor soldersplashes
and bridges.
2. Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4. Look forparts which,through functioning,showobvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
•Keep the temperature of the soldering iron around 270˚C
during repairing.
•Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
•Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
•Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENTWARNING!!
COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINEWITH
MARK 0ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Dangerofexplosionifbattery isincorrectlyreplaced.
Replace only with the same or equivalent type.

—4 —
DSC-H1
TABLE OF CONTENTS
1. SERVICE NOTE ........................................................1-1
2. DISASSEMBLY
2-1. DISASSEMBLY······························································2-1
2-2. SERVICE POSITION ·····················································2-5
2-3. CIRCUIT BOARDS LOCATION ···································2-7
2-4. FLEXIBLE BOARDS LOCATION ································2-8
HELP (List of caution points is shown here.)
3. BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM (1/2) ···························3-1
3-2. OVERALL BLOCK DIAGRAM (2/2) ···························3-3
3-3. POWER BLOCK DIAGRAM (1/2) ································3-5
3-4. POWER BLOCK DIAGRAM (2/2) ································3-7
4. PRINTEDWIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAM································4-1
4-2. SCHEMATIC DIAGRAMS
•CD-576 (CCD IMAGER)
SCHEMATIC DIAGRAM ······························4-5
•MS-275 (MEMORY STICK, LI BATTERY)
SCHEMATIC DIAGRAM ······························4-7
•ST-123 (FLASH DRIVE)
SCHEMATIC DIAGRAM ······························4-9
•ST-124 (FLASH)
SCHEMATIC DIAGRAM ····························4-17
•PL-039 (PLUNGER)
SCHEMATIC DIAGRAM ······························4-8
•SW-447 (1/2) (FUNCTION SW)
SCHEMATIC DIAGRAM ····························4-11
•SW-447 (2/2) (PITCH/YAW SENSOR AMP)
SCHEMATIC DIAGRAM ····························4-13
•EV-016 (EVF, BACK LIGHT)
SCHEMATIC DIAGRAM ······························4-7
•AF-102 FLEXIBLE (AF LED, LENS COVER SW)
SCHEMATIC DIAGRAM ····························4-15
•SW-006 FLEXIBLE (SY-SW RELAY)
SCHEMATIC DIAGRAM ····························4-18
•MS-029 FLEXIBLE (SY-MS RELAY)
SCHEMATIC DIAGRAM ····························4-15
•ST-001 FLEXIBLE (SY-ST RELAY)
SCHEMATIC DIAGRAM ····························4-17
•FP-224 FLEXIBLE (SY-CD RELAY)
SCHEMATIC DIAGRAM ····························4-16
•CONTROL SWITCH BLOCK (SW51780)
SCHEMATIC DIAGRAM ····························4-19
Shematic diagram of the CH-169 and SY-127 board
are not shown.
Pages from 4-21 to 4-44 are not shown.
4-3. PRINTED WIRING BOARDS
•CD-576 (CCD IMAGER)
PRINTED WIRING BOARD ·······················4-49
•MS-275 (MEMORY STICK, LI BATTERY)
PRINTED WIRING BOARD ·······················4-47
•ST-123 (FLASH DRIVE)
PRINTED WIRING BOARD ·······················4-51
•ST-124 (FLASH)
PRINTED WIRING BOARD ·······················4-52
•PL-039 (PLUNGER)
PRINTED WIRING BOARD ·······················4-51
•SW-447 (FUNCTION SW, PITCH/YAW SENSOR AMP)
PRINTED WIRING BOARD ·······················4-53
•EV-016 (EVF, BACK LIGHT)
PRINTED WIRING BOARD ·······················4-49
•AF-102 FLEXIBLE (AF LED, LENS COVER SW)
PRINTED WIRING BOARD ·······················4-47
Printed wiring board of the CH-169 and SY-127 board
are not shown.
Pages from 4-55 to 4-60 are not shown.
4-4. WAVEFORMS ······························································4-61
Waveforms of the SY-127 board are not shown.
Page 4-62 is not shown.
4-5. MOUNTED PARTS LOCATION ·································4-63
Mounted parts location of the SY-127 board is not
shown.
Page 4-64 is not shown.
5. REPAIR PARTS LIST
5-1. EXPLODED VIEWS ······················································5-3
5-1-1. OVERALL SECTION····················································5-3
5-1-2. LED SECTION, CABINET(REAR) SECTION ············5-4
5-1-3. MAIN SECTION ···························································5-5
5-1-4. EVF SECTON ·······························································5-6
5-1-5. LENS SECTION ···························································5-7
5-1-6. CABINET(FRONT) SECTION·····································5-8
5-1-7. ST SECTION ·································································5-9
Checking supplied accessories ················································5-10
5-2. ELECTRICAL PARTS LIST ········································5-11
Electrical parts list of the SY-127 board are not
shown.
Pages from 5-14 to 5-18 are not shown.

1-1
DSC-H1
1. SERVICE NOTE
• NOTE FOR REPAIR
[Discharging of the FLASH unit’s charging capacitor]
The charging capacitor of the FLASH unit is charged up to the
maximum 300 V potential.
There is a danger of electric shock by this high voltage when the
capacitor is handled by hand. The electric shock is caused by the
charged voltage which is kept without discharging when the main
powerof theDSC-H1 issimply turnedoff. Therefore,the remaining
voltage must be discharged as described below.
Preparing the Short Jig
To preparing the short jig. a small clip is attached to each end of a
resistor of 1 kΩ/1 W (1-215-869-11)
Wrap insulating tape fully around the leads of the resistor to prevent
electrical shock.
1 kΩ/1 W
Wrap insulating tape.
Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
Cut and remove the part of gilt
which comes off at the point.
(Take care that there are
some pieces of gilt left inside)
When remove a connector, don't pull at wire of connector.
Be in danger of the snapping of a wire.
When installing a connector, don't press down at wire of connector.
Be in danger of the snapping of a wire.
Discharging the Capacitor
1Remove the main section.
2Dischargethe capacitoron theST-123board forabout 10seconds
by using the short jig.
1 Discharging the capacitor
Capacitor
ST-123 board
Short jig (
1k Ω /1W )
Caution

1-2
DSC-H1
Note : The error code is cleared if the battery is removed, except defective flash unit.
*1: The error display is given in two ways.
Display Code
C:32:01
C:13:01
E:91:01
E:01:XX
E:61:00 *1
E:61:10 *1
Countermeasure
Turn off the main power then back on.
Replace the memory stick.
Format the memory stick with the DSC-H1.
Checking of flash unit or replacement of
flash unit.
Checking of lens drive circuit
Cause
Trouble with hardware.
• The type of memory stick that cannot be
used by this machine, is inserted.
• Data is damaged.
• Unformatted memory stick is inserted.
Abnormality when flash is being
charged.
When failed in the focus initialization.
Caution Display During Error
SYSTEM ERROR
MS ERROR
Flash LED
Flash display
Flashing at 3.2 Hz
—
Self-diagnosis display
• C: ss: ss
Thecontents whichcan behandled
by customer, are displayed.
• E: ss: ss
Thecontents whichcan behandled
by engineer, are displayed.
[Description on Self-diagnosis Display]

1-3E
DSC-H1
• METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: 1 When replacing the SY-127 board, erase the data in internal memory of the board before replacement.
Note: 2 When replacing the SY-127 board or the IC381 on the SY-127 board, execute formatting and initialize the internal memory after
replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Copies all images in the internal memory to a “Memory Stick”.
1Insert a “Memory Stick” having 32 MB or larger capacity.
2Select [OK] with von the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3Select [OK] with v , then press z.
Copying starts.
Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly
corrupting the data.
You cannot copy individual images.
The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in
Internal Memory Tool.
You cannot select a folder copied on a “Memory Stick”.
The setting of (Print order) marks is not copied even when you copy data.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
Formats the internal memory.
Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1Select [OK] with von the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
2Select [OK] with v, then press z.
The format is com
p
lete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
• PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the
flash is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.
Method for Initializing the Flash Error Code
Initializes the setting to the default setting.
1Select [OK] with von the control button, then press z.
The message “Initialize all settings Ready?” appears.
2Select [OK] with v, then press z.
The settings are reset to the default setting.
Make sure that the power is not disconnected during resetting.
Initialize
OK See the following procedure.
Cancel Cancels the resetting.

DSC-H1 2-1 2-2
2-1. DISASSEMBLY
The following flow chart shows the disassembly procedure.
2. DISASSEMBLY
1 Three screws (M2x4) silver
2 Three screws (M2x4) silver
3 Remove the JK lid in the
direction of the arrow.
4 Claw
5 Cabinet (rear) section
1 Flexible flat cable (MS-029)
2 Tapping screw (M1.7x4) black
3 Two claws
4 MS-275 board
5 Battery connector
6 Three claws
7 Battery terminal board
1 Flexible flat cable (MS-029)
2 Battery connector
3 From the loudspeaker
4 Three tapping screws (M1.7x4) black
5 Fuse replacement caution label
6 SY-127 board
1 EV-016 board
2 Two claws
3 EVF section
1 Light guide plate (2.5) block
2 Two claws
3 Remove the LCD, Light guide plate (2.5) block
in the direction of the arrow.
4 LCD unit
5 LCD unit, Light guide plate (2.5) block
1 Tapping screw (M1.7x4) black
2 Three claws
3 Claw
4 LCD frame assembly
1 Flexible flat cable (SW-006)
2 Four tapping screws (M1.7x4) black
3 Claw
4 SW-447 board
1 From the lens flexible board
2 FP-224 flexible board
3 From the lens flexible board
4 Flexible flat cable (ST-001)
5 Control switch block (SW51780)
6 AF-102 flexible board
7 From the microphone
8 Tapping screw (M1.7x4) black
9 Main section
1
4
4
1
4
3
1
2
41
3
2
2
3
5
2
8
5
9
6
3
4
2
1
7
3
SY-127
SW-447
SY-127
5
4
3
2
1
6
7
SY-127
5
SY-127
4
2
4
1
3
2
5
6
3
1
7
3
5
6
1
ST section
(See page 2-3.)
MS-275
SY-127
SY-127
SY-127
Note: Be very careful not to
damage the flexible board.
2

DSC-H1
2. DISASSEMBLY
2. DISASSEMBLY
2-3 2-4
1 Tapping screw (M1.7x4) black
2 Control switch block (SW51780), Microphone unit
1 Two tapping screws (M1.7x4) black
2 Lens section
1 Remove the AF-102 flexible board
in the direction of the arrow.
2 Three claws
3 Three claws
4 AF-102 flexible board
1 Tapping screw (M1.7x4) black
2 Claw
3 ST-123 board
4 Three harnesses (HA-001) (Red, White, Blue)
5 Open the ST cover in the direction of the arrow.
6 ST section
1
2
3
1
2
1
2
4
2
4
3
5
1
6
1 Discharging the capacitor
Capacitor
ST-123 board
Short jig (
1k Ω /1W )
Caution
HELP 01
HELP 02

DSC-H1
SY-127
SW-447
MS-275
Audio/Video jack
Battery terminal board
Battery section
Monitor TV
SW-447 board
Lens section
From the lens section
From the lens section SY-127 board
MS-275 board
CN509
CN514
CN506
CN101
CN401
CN502
CN513
Flexible flat cable (SW-006)
FP-224 flexible board
Flexible flat cable (MS-029)
Control switch block (SW51780)
MS-275 board
Flexible flat cable (MS-029)
Insert the batteries (size AA).
Nickel Metal Hydride batteries (x2).
[SERVICE POSITIONTO CHECKTHE SY-127 BOARD]
2
41
3
SY-127
4
12
3
SY-127
SW-447
8
5
9
6
3
4
2
1
7
SY-127
2
1
1
2
1 Discharging the capacitor
Capacitor
ST-123 board
Short jig ( 1k Ω /1W )
Caution
4
1
3
2
5
6
SY-127
4
1
2
3
5
1
4
3
2
5
3
1
SY-127
2
2-5 2-6
2-2. SERVICE POSITION

2-7
2. DISASSEMBLY
2. DISASSEMBLY
DSC-H1
2-3. CIRCUIT BOARDS LOCATION
SY-127CH-169
SW-447
MS-275
AF-102
EV-016
ST-124
PL-039
CD-576
ST-123
NAME FUNCTION
AF-102 AF LED, LENS COVER SW
CCD IMAGER
EVF, BACK LIGHT
MEMORY STICK, LI BATTERY
PLUNGER
FLASH DRIVE
FLASH
FUNCTION SW, PITCH/YAW SENSOR AMP
LENS DRIVE, CAMERA A/D CONV., TIMING GENERATOR, CAMERA DSP,
SYSTEM CONTROL, 256Mbit SDRAM, FLASH MEMORY, SUPER AND FLASH MEMORY,
A/V AMP, USB/AV JACK, SP, MIC, PANEL DRIVE, STEADY SHOT CONTROL,
LENS SERVO, CONNECTOR, DC/DC CONVERTER
CD-576 CCD SIGNAL PROCESS
CH-169
EV-016
MS-275
PL-039
ST-123
ST-124
SW-447
SY-127

2-8E
2. DISASSEMBLY
2. DISASSEMBLY
DSC-H1
2-4. FLEXIBLE BOARDS LOCATION
The flexible boards contained in the optical unit are not shown.
CONTROL SWITCH BLOCK (SW51780)
MS-029
SW-006
FP-224 ST-001

DSC-H1
HELP
HELP
Disassembling and assembling procedures that require attention are described here.
HELP 01
HELP 02
Harness (HA-001) (Blue)
Harness (HA-001) (White)
Harness (HA-001) (Red)
Blue
Red
White
1 Harness (H-001) (Red)
2 Harness (H-001) (White)
3 Harness (H-001) ( Blue )
4 Apply the soldering in three points.
5 ST-123 board
6 ST-124 board
7 Four claws
8 ST cover
9 Tapping screw (M1.7x4) black
0 ST section
9
6
8
0
7
5
4
3
Blue
2 White
1 Red

DSC-H1
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (1/2)
OVERALL BLOCK DIAGRAM (2/2)
POWER BLOCK DIAGRAM (1/2)
POWER BLOCK DIAGRAM (2/2)

DSC-H1 3-1 3-2
3-1. OVERALL BLOCK DIAGRAM (1/2)
3. BLOCK DIAGRAMS
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
IC301
(1/2)
CP201
TIMING
GENERATOR
S/H
A/D CONV.
IC101
CCD IMAGER
IC353
256Mbit
SDRAM
IC381
SUPER AND
FLASH MEMORY
IC351
FLASH MEMORY
IC801
MIC AMP
IC601
IC602
RGB DRVE
TIMING
GENERATOR
AU OUT AMP
SPEAKER AMP
45
46
G1
E4
F3
F4
F3
F4
A2
B2
15
47
6
22
12
10
8
6
18
22
12
10
8
6
18
H1A,B
H2A,B
RG
V1A,B
V2
V3A,B
V4
V5A,B
V6
V7A,B
V8,
DST,
VHLD
DIR2A
BRK2A
DIR2B
BRK2B
DIR2A
BRK2A
DIR2B
BRK2B
FC DIR A
FC DIR B
FC EN
FC DIR A
FC DIR B
FC EN
MSHUT DIR
MSHUT EN
MSHUT DIR
MSHUT EN
ZM DIR A
ZM BRK A
ZM DIR A
ZM BRK A
ZOOM +
ZOOM -
SHUTTER +
SHUTTER-
ZM DC FG 1A
ZM DC FG 1B
ZM SENS 2ND
XMS IN
XMS IN
XSHIFT ON
XDD RST OUT
USB VBUS
4,3,5,7,2,8
6
CN252
CN505
CN508 CN001
V LINE OUT
CN506
CN251
1-14 27,28
19-17
FOCUS
MOTOR
IRIS
MOTOR
IRIS
SHUTER
66
65
63
FOCUS RESET
SENSOR
Q602,603
D001
(EVF BACK LIGHT)
ZOOM RESET
SENSOR 1ST
3
5
IC102
BUFFER
3
1
M
M
M
ZOOM
MOTOR L2
N5
L4
B9
A10
H5
J5
AC1
AD1
E9
B8
F3
E3
95
96
7
6
A5
A2
V5
W4
U5
V4
N6
N2
R25
R5
V LINE OUT V OUT
CN502
X301
EXTAL
CCD OUT
CN502
CN101 CN101
CLK TGO
CA HDCA FD
U4
25-38
N4
P6
P4
R2
C1
E5
E6
MS D0-MS D3, MS BS, MS CLK
T5
L26
U25
K26
H26
A6
E1
SP901
SPEAKER
MIC
MIC SIG
SP+
SP-
MIC901
MEMORY
STICK
CONNECTOR
D1
C2
B6
LENS UNIT CD-576 BOARD
SW-447 BOARD (1/2)
SY-127 BOARD (1/2)
MS-275
BOARD
(1/2)
EV-016
FLEXIBLE
BOARD
A/V OUT
J751
SAN1 SO,SCK
USB VBUS
AU LINE OUT
XAV JACK IN
IC802
VIDEO AMP
IRIS DRIVE
SHUTTER DRIVE
FOCUS MOTOR
DRIVE
IC401
(1/2)
(1/11)
PRE DRIVE
IC104
IC103
IC401
IC101
IC107
CN401
ZOOM MOTOR
DRIVE
F5
E5
D3
F1
F2
E2
D2
B1
D5
A6
B6
C5
D6
E6
B7
C6
ZM SENS 1ST
FC SENS
PITCH PWM
PITCH PWM
YAW PWM
184
12
3
8
7
9
6
8
7
6
131
132
1
3
129
130
2
73
13
37
38
9
8
EVF BL ON
EVF BL LEV
XDD RST OUT
XSHIFT ON
PITCH POS AD
P DRIVE A
P DRIVE B
Y DRIVE A
Y DRIVE B
PITCH AD
YAW AD
YAW POS AD
4
4
2
2
YAW PWM
ZM DC FG 1A
ZM DC FG 1B
FC SENS
ZM SENS 1ST
ZM SENS 2ND
ZOOM RESET
SENSOR 2ND
ZOOM DC FG
PITCH
YAW
PITCH
SENSOR
YAW
SENSOR
IRIS A
IRIS XA
IRIS B
IRIS XB
FOCUS A
FOCUS XA
FOCUS B
FOCUS XB
SHUTTER
MOTOR
M
1
4
9
16
8
5
32
31
36
39
22
24
25
2
4
14
12
7
9
1
2
2
8
6,5,7,
9,4,10
5
7,8,6,
4,9,3
22
|
19
14
|
11
8
|
6
2
6
24
23
4
5
3
2.5 INCH
COLOR LCD
PANEL
LCD901
XSAN RST OUT
AUIN
AUOUT
LCD CK
LCD HD
LCD VD
VR
VG
VB
VR
VG
VB
LCD D0-D7
40 41
PANEL COM/CS
EVF COM/CS
AF4
AC4,AE4
AE5,AC5
AB6,AF6
D9
J6
PSIG
PSIG
PANEL REF
XSTB E
PANEL VST
VCK,EN
DWN,XSTB M
PCG,HST
HCK2,HCK1
RGT
PANEL REF
PANEL VST
VCK,EN
DWN,XSTB M
PCG,HST
HCK2,HCK1
RGT
PANEL REF
PANEL VST
VCK,EN
DWN,XSTB E
PCG,HST
HCK2,HCK1
RGT
COLOR EVF
UNIT
LCD902
K4
J7
D8,D7,E8
E7,D6,D5
E6,B4
J4,H1
H2,G1
G2,F1
F2,E2
D1,D2
C2,B1
B3,A3,B4
B5,A5,B6
A7,B7
K5,G4,H4,L5
H2,H1,J1,J2
M5,J4,K4,M6
K2,K1
D21,D22,D20,B22,A22,A23
B23,E20,E21,B24,A24,A25
B25,C25,C26,B26,E10,A10
D10,E11,B10,A11,B11,E12
D11,D12,F12,B12,A12,E13
D13,D14
D17,D18,D16,B18,A19
B19,E16,D19,E19,E17
B20,A20
U2
T2
R6
K2
K3
K1
A9
C9
A2
C10
SAN1 SO, SI, SCK
SAN1 SO, SI, SCK
SAN1 SO, SCK
Q301
12MHz
XTAL OSC
D0-D31
A0-A11
D0-D15
D0-D15 D0-D15
A01-A21
A01-A21,A25
A20,A21,A25
X902
20MHz
IC901
STEADY SHOT
CONTROL
CN511
3,2
1
CN510
ST 5V
EVF BL ON
EVF BL LEV
EVF BL L
EVF BL H
1
|
5
22
|
35
7
|
20
FP-224 FLEXIBLE
BOARD
MS-029 FLEXIBLE
BOARD (1/2)
SW-006 FLEXIBLE
FLAT CABLE (1/2)
25-38
ACTIVE
LENS
ACTUATOR
CN101
CN513
CN451
SE401
SE402
7
6YAW DRIVE
PITCH DRIVE
IC102
LPF LPF
IC106
PITCH/YAW
SENSOR
AMP
8
12
2
18
SAN1 SO, SCK
21
|
17
14
|
10
6
3
4
5
8
9
7
1
2
15
|
5
21
19
17
18
16
20
CAMERA DSP
AB13,AA13,AE13,AF13,AF12
AE12,AA12,AC12,AC11,AB12
AE11,AF11,AE10,AB11,AC10
AB10
AF21,AF20,AE20,AB18,AB19
AC19,AB16,AE19,AF19,AF18
AE18,AA15,AC18,AC17,AB15
AE17,AF17,AE16,AB14,AC16
AC15,AE14,
EVF BACK LIGHT
DRIVE
(USB)
CN751
TO
OVERALL
BLOCK DIAGRAM
(2/2)
(PAGE 3-4)
1
8
9
7
6
CA AD0 - CA AD13
SAN1 SO, SI, SCK
USB DPP, USB DMM
IC105
(2/11)
(4/11)
(5/11)
(9/11)
(9/11)
(9/11)(9/11)
(8/11)
(9/11)
(9/11)
(9/11)
(4/11)
(6/11)
(3/11)
(7/11)
(7/11)
(6/11)

DSC-H1 3-3 3-4
3-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
MODE DIAL
S106,101,102
EVF/LCD, FOCUS, BRK
S105
EXEC
JOG DIAL
S104
POWER
D102 (POWER)
S103
SHUTTER
S458,460,456,454,457,453
DOWN, RIGHT, UP, LEFT, SET, DUST
DOWN, RIGHT, UP, LEFT, SET, DUST
CN501
CN507
CN001
CN452
LED901
CN451
CN513
CN514
CONTROL SWITCH
BLOCK(SW51780)
SW-447 BOARD (2/2)
AF-102 FLEXIBLE BOARD
SW-006
FLEXIBLE
FLAT CABLE
(1/2)
PL-039 BOARD
D101 (FLASH)
D001 (AF LED)
6
4
5
6
7
4
12
|
10
8
7
6
9
1
|
3
XPWR ON
BL H
BL L
STRB PLUNGER
XAF LED
D455 (ACCESS)
S459,455,452,451
ZOOM WIDE, ZOOM TELE, MENU, DISPLAY
S107
STEADY SHOT
XSHIFT ON
ST UNREG
ST-123 BOARD FLASH UNIT
(ST-124
FLEXIBLE
BOARD)
ST-001
FLEXIBLE
FLAT CABLE
HIGH VOLTAGE
CHAGER
IGBT
DRIVE FLASH
DRIVE
TRIGGER
COIL XENON
TUBE
T001
Q001
L001
D001
CN001
C004
XE H
XE L
D001
(RECT)
10
15
9
6
47
S001
(LENS COVER OPEN)
S301
(STRB POP UP)
RY301
PLUNGER
1
4
5
8
7
1
4
3
4
6
1
3
8
7
14
12
10
9
11
5
4
3
2
1
20
19
16
17
18
19
20
1
2
LCD
BACK
LIGHT
MODE DIAL 0
MODE DIAL 1
BT251
BATTERY
(SECONDARY)
CN251 CN506
MS-275
BOARD
(2/2)
MS-029
FLEXIBLE
FLAT CABLE
(2/2)
22
XAE LOCK SW
XSHUTTER SW
JOG A
JOG B
XPWR LED
XSTRB LED
KEY AD2
XACCESS LED
VL 3V
KEY AD0
KEY AD1
STRB CHG
XSTRB FULL
STRB CHG CONT
STRB ON
STRB PLUNGER ON
XSTRB POPUP
XLENS COVER SENS
XSHIFT ON
V22
A1 B3
R22
V23
R4
AB22
AA25
AC23
G25
E22
D23
K23
L23
E4
K25
A23
SAN0 SO
SAN0 SI
XSAN0 SCK
USB VBUS
XMS IN
BATT SENS
XDD RST OUT
XDD RST OUT
XPWR OFF
IC401
(2/2)
STRB PLUNGER DRIVE
N21
P23
L22
L25
AB23
W22
Y4
R26
AB5
AA5
Y5
IC301
(2/2)
SYSTEM CONTROL
IC001
SY-127 BOARD (2/2)
TO
OVERALL
BLOCK DIAGRAM
(1/2)
(PAGE 3-2)
1
VL 3V
C6
B6
B10
A4
SAN0 SO
SAN0 SI
XSAN0 SCK
IC005
IC001
CN509
XAF LED
BATTERY
TERMINAL
A8
G5
A7
B7
C7
C9
OSC I
A9 OSC O
X001
32.768KHz
F001
F002
STEADY 5V
EVER 3.1V
EVER 2.8V
D 3.2V
D 3.2V (TO CAM)
D 3.2V (TO SP)
A 3.2V
MS VCC
CAM 2.9V (TO CAM)
CAM 2.9V (TO PANEL)
D 1.8V
M 5V
ST 5V
D 1.2V
PANEL 8.5V
CAM 15V
CAM -7.5V
BL H
BL L
ST UNREG
UNREG
UNREG
REG GND
BATT SENS
XDD RST OUT
XPWR ON
USB VBUS
XMS IN
VL 3V
XPWR OFF
-7,5V/15V REG
IC004
DC/DC CONV.
B8
DC/DC CONVERTER
REAL TIME CLOCK
(11/11)
SAN0 SO, SI, SCK
2
1
4
3
C5
1
2
(3/11)
(1/11)
(11/11)
(11/11)

DSC-H1 3-5 3-6
3-3. POWER BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
E10 LX3
E9 VO3
LV3
RS3
G9 BG4
TG4
F10
PSG4
G8
D002
(RECT)
D003
(RECT)
D821
L005
BL H BL H
F9
F8
BL L BL L
-7.5V ON
-7.5V ON
M 5V
M 5V
D 1.2V
STEADY 5V
STEADY 5V
ST 5V
CAM 2.9V (TO PANEL)
PANEL 8.5V
ST 5V
D 3.2V
A 3.2V, AU 3.2V, VI 3.2V, D 1.8V, D 1.2V
D 1.2V
CAM 15V
CAM 3.2V
D 3.2V
D 3.2V (TO SP)
D 3.2V
D 3.2V (TO CAM) D 3.2V (TO CAM)
ST 5V
D 1.8V
A 3.2V A 3.2V
MS VCC
MS VCC
CAM 2.9VCAM 2.9V
CAM -7.5V
AU 3.2V
AU 3.2V
PANEL 2.9V
L008
Q001
SWITCHING
Q004
SWITCHING & RECT
Q003
SWITCH
Q002
RECT
MS PWR IN
MS PWR
G1
H1
G2
PWR56 OUT
UNREG2
LDO2
LDO1
RTC BAT
UNREG1-1,2
LDO2IN
C10 LX2
D8 VFB2
D10 PWR2
H9 VFB5
B8
H10
B3
A3
VO5
H7 VFB6
H6 GT6
F7 VFB4
L003
L006
L009
VO1-1
VO1-2
H2 VFB1
PWR1-1
PWR1-2
PWR1-3
LX5-1
LX5-2
LX5-3
LX5-4
J9
J10
K9
K10
XCS DD
SAN0 SO
SAN0 SI
XSAN0 SCK
XCS DD
SAN0 SO
SAN0 SI
XSAN0 SCK
A6
C5
C6
B6
J7
K7
J6
K6
F1
F2
J1
K1
Y4
R26
IC005
-7.5V REG
15V REG
1
4
3
IC803
3.2V REG
IC802
VIDEO AMP
IC801
MIC AMP
SPEAKER AMP
AU OUT AMP
67
4
1
3
1.8V REG
LDO3
LDO3IN
VL 3V
EVER 3.1V
EVER 2.8V
B7
XPWR OFF XPWR OFF
C7
XPWR ON
XPWR ON XPWRON1
D3
MS PWR ON MS PWR ON
BATT SENS
G5
UNREGMON
XDD RST OUT
A7
K25
A23
T25
XRESET
B2
A2
2.9V REG
A1
B1
C2
L011 L001
L001
L010
L803
2
9
6
8
IC004
DC/DC CONV.
3.1V
REG.
K4
VO7
IC001
DC/DC CONVERTER
REAL TIME CLOCK
A8 OSC I
A9 OSC O
X001
32.768KHz
IC301
CAMERA DSP
SYSTEM CONTROL
(3/11)
(4/11)
(4/11)
(5/11)
(11/11)
IC353
256Mbit
SDRAM
W23
AB5
AA5
Y5
IC351
FLASH MEMORY
IC381
SUPER AND
FLASH MEMORY
P25
-7.5V ON
SY-127 BOARD (1/2)
D001
R002
F001
F002
F003
UNREG
PANEL 8.5V
ST UNREG ST UNREG
CN514
CN506
CN251
CN507
CN501
R22
V23
AB22
STRB CHG
XSTRB FULL
STRB CHG CONT
STRB CHG
XSTRB FULL
STRB CHG CONT
D 3.2V
A 3.2V
AU 3.2V
VI 3.2V
D 1.2V
D 3.2V
D 1.8V
D 3.2V
A 3.2V
D3.2V
POWER
S104
A4
XAF LED
XAF LED
MS VCC
9
D23
E22
XPWR LED
XSTRB LED
D102 (POWER)
D101 (FLASH)
D001 (AF LED)
CONTROL SWITCH
BLOCK (SW51780)
VL 3V
BT251
LITHIUM
BATTERY
(SECONDARY)
CN252
MEMORY
STICK
CONNECTOR
MS-275
BOARD
4
3
1
13
2
4
2
11
3
5
4
6
9
12
|
10
8
9
7
4
1
|
3
VI 3.2V
BATTERY
TERMINAL
CN509
UNREG
REG GND
4
3
2
1
MODE
DIAL
AF-102 FLEXIBLE
BOARD
MT 5V
1
TO
POWER
BLOCK DIAGRAM
(2/2)
(PAGE 3-7)
1
ST-001
FLEXIBLE
FLAT CABLE
FLASH UNIT
(ST-124
FLEXIBLE BOARD)
1
2
HIGH VOLTAGE
CHAGER
IGBT DRIVE
T001
CN001
C004
XE H
D001
(RECT)
15
10
9
6
3
IC001
ST-123 BOARD
XENON
TUBE
(11/11)
(6/11)
(6/11)
(11/11)
(6/11)

DSC-H1 3-7 3-8E
3-4. POWER BLOCK DIAGRAM (2/2) ( ) :Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
CAM 15V CD
CAM 2.9V
CAM 15V
CAM -7.5V
D 3.2V
M 5V
A 3.2V
CAM_ 2.9V(TO PANEL)
PANEL 8.5V
ST 5V
D 3.2V
D 3.2V
VCC
STEADY 5V
A 4.6V
L103
FULL PWR
LIM PWR
FULL PWR
LIM PWR
CAM -7.5V
FC RST VCC
ZM RST VCC
L201
CN401
CN101
CN513
CN508
CN001
CN505
CN451 CN452
CN502 CN101
L101
Q401,402
SE401, 402
D455
D001 (EVF BACK LIGHT)
L602
L603
IC102
BUFFER
IC101
CCD IMAGER
IC401
PITCH/YAW
SENSOR AMP
IC601
RGB DRIVE
TIMING
GENERATOR
IC901
STEADY SHOT
CONTROL
IC102
IC103
PITCH DRIVE
YAW DRIVE
IC105
IC106
LPF
IC104
PRE DRIVE
IC101
IC107
INVERTER
IC401
IRIS DRIVE
SHUTTER DRIVE
FOCUS MOTOR DRIVE
ZOOM MOTOR DRIVE
PLUNGER DRIVE
CP201
(2/11)
S/H
A/D CONV.
TIMING GENERATOR
CD-576 BOARD
FOCUS
RESET
SENSOR
ZOOM
RESET
SENSOR
ZM FG VCC
A 4.6V
D 3.2V
D 3.2V
BL H
BL H
EVF BL H
EVF BL L
BL L
BL L
PANEL VDD
PANEL VDD
EVF BL ON
EVF BL LEV
EVF BL ON
EVF BL LEV
A 3.2V
A 3.2V
XFE ON / VAP DD ON
XFE ON / VAP DD ON
XFE ON / VAP DD ON
ZOOM
DC FG
LENS UNIT
14
16
2
16
1
46
14
16
FP-224
FLEXIBLE
BOARD
SW-447
BOARD
SW-006
FLEXIBLE
FLAT CABLE
EV-016
FLEXIBLE BOARD
33
21
27
28
3
18
2
ACTIVE
LENS
ACTUATOR
PITCH/YAW
SENSOR
ACCESS LED
Q602, 603
BACK LIGHT
DRIVE
LCD
BACK
LIGHT
LED901
2.5 INCH
COLOR LCD
PANEL
LCD901
4
3
5
2
8
9
10
18
17
18
16
19
13
12
11
3
COLOR EVF
UNIT
LCD902
IC602
Q107,110
CURRENT
LIMITER
IC110
1
170
3
4
IC108
4.6V REG
37
38
154
155
D_1.2V 79
36
SY-127 BOARD (2/2)
TO
POWER
BLOCK DIAGRAM
(1/2)
(PAGE 3-6)
1
(1/11)
(9/11)
(9/11)
(9/11)
(8/11)
(7/11)
(7/11)
(9/11) (9/11) (9/11)

DSC-H1 4-1
4-1. FRAME SCHEMATIC DIAGRAM
4. PRINTEDWIRING BOARDS AND SCHEMATIC DIAGRAMS
4-2 FRAME SCHEMATIC DIAGRAM
12P
CN501
1
2
3
4
5
6
7
8
9
10
11
12
24PCN505
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
22PCN508
1 2 3 4 5 6 7 8
9
10 11 12 13 14 15 16 17 18 19 20 21 22
2P
CN511
1 SP_+
2 SP_-
4P
CN509
1 2 3 4
12P
CN001
1
2
3
4
5
6
7
8
9
10
11
12
2PCN510
1 2
39P
CN502
1REG_GND 2CSUB 3VSUB 4RAMDOM_TRIGGER 5REG_GND 6H2B 7REG_GND 8H1B 9REG_GND
10 H2A 11 REG_GND 12 H1A 13 REG_GND 14 CAM_-7.5V_CD 15 POWER_SAVE 16 CAM_15V_CD 17 REG_GND 18 RG 19 REG_GND 20 REG_GND
21 REG_GND
22 CCD_OUT 23 REG_GND 24 REG_GND 25 V5A 26 V1A 27 V5B 28 V1B 29 VHLD 30 V2 31 V6 32 V3A 33 V7A 34 V3B
35 V7B 36 VST 37 V8 38 V4 39 REG_GND
39PCN101
1
REG_GND
2
CSUB
3
VSUB
4
RAMDOM_TRIGGER
5
REG_GND
6
H2B
7
REG_GND
8
H1B
9
REG_GND
10
H2A
11
REG_GND
12
H1A
13
REG_GND
14
CAM_-7.5V_CD
15
POWER_SAVE
16
CAM_15V_CD
17
REG_GND
18
RG
19
REG_GND
20
REG_GND
21
REG_GND
22
CCD_OUT
23
REG_GND
24
REG_GND
25
V5A
26
V1A
27
V5B
28
V1B
29
VHLD
30
V2
31
V6
32
V3A
33
V7A
34
V3B
35
V7B
36
VST
37
V8
38
V4
39
REG_GND
6P
CN452
1 N.C.
2 N.C.
3 N.C.
4 BL_L
5 N.C.
6 BL_H
10PCN507
1 2 3 4 5 6 7 8 9
10
12PCN506
1
2
3
4
5
6
7
8
9
10
11
12
12P
CN251
12
11
10
9
8
7
6
5
4
3
2
1
14PCN514
1
2
3
4
5
6
7
8
9
10
11
12
13
14
20P
CN513
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20
20P
CN451
1 KEY_AD0 2 KEY_AD1 3 D_3.2V 4 REG_GND 5 VST_C_RESET 6 REG_GND 7 YAW_AD 8 REG_GND 9 PITCH_AD
10 REG_GND 11 VAP_DD_ON
12 A_3.2V 13 A_3.2V 14 REG_GND 15 REG_GND 16 BL_H 17 BL_H 18 BL_L 19 BL_L 20 XACCESS_LED
21PCN001
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21
39PCN401
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
10PCN101
1 2 3 4 5 6 7 8 9
10
6P
CN301
1 2 3 4 5 6
1
A
10P
CN252
1
2
3
4
5
6
7
8
9
10
PANEL_VDD
REG_GND
EVF_VSSG
HST
HCK2 HCK1
RGT
PANEL_REF
XSTB_E
DWN
VST
EN
PCG
VCK
VB
VG
CS
VR
PSIG
EVF_BL_L
EVF_BL_H
COM
MIC_GND MIC_SIG
REG_GND REG_GND
UNREG UNREG
ST-123 BOARD
MS-275
BOARD
CD-576 BOARD
AF
EV-016 FLEXIBLE BOARD
SW-447 BOARD
ST-124
FLEXIBLE BOARD
CS
PSIG
PCG
DWN
N.C.
VG
HST
PANEL_VDD
COM
TEST1
VR
PANEL_REF
REG_GND
VST
N.C.
VB
HCK2
PANEL_VSSG
VCK
TEST2
RGT
HCK1
XSTB_M
EN
LCD BACK LIGHT
AV
USB
SY-127 BOARD
AF-102 FLEXIBLE BOARD
CCD IMAGER
SW-006
FLEXIBLE FLAT CABLE
ST-001 FLEXIBLE FLAT CABLE
MS-029 FLEXIBLE FLAT CABLE
FP-224 FLEXIBLE BOARD
LENS UNIT
STRB_PLUNGER
REG_GND
XAF_LED
STRB_PLUNGER
XLENS_COVER_SENSE
REG_GND REG_GND REG_GND
XSTRB_POPUP
D_3.2V
STRB_CHG
XSTRB_FULL
REG_GND
STRB_ON
REG_GND
STRB_CHG_CONT
REG_GND
ST_5V
ST_UNREG
ST_UNREG
ST_UNREG
REG_GND
STRB_ON
REG_GND
ST_5V
ST_UNREG
REG_GND
REG_GND
XSTRB_FULL
ST_UNREG
STRB_CHG_CONT
ST_UNREG
STRB_CHG
REG_GND
MS_D1
XMS_IN
MS_D0
MS_VCC
REG_GND
REG_GND
MS_BS
MS_CLK
REG_GND
MS_D3
VL_3V
MS_D2
MS_CLK
MS_VCC
MS_D3
MS_BS
MS_D0
VL_3V
REG_GND
XMS_IN
MS_D2
REG_GND
MS_D1
REG_GND
(LITHIUM BATTERY)
(SECONDARY)
XSHUTTER_SW
JOG_B
REG_GND
A_3.2V
MODE_DIAL0
XSHIFT_ON
MODE_DIAL1
XPWR_LED
JOG_A
KEY_AD2
D_3.2V
XPWR_ON
XAE_LOCK_SW
XSTRB_LED
REG_GND REG_GND REG_GND
XACCESS_LED
KEY_AD0
REG_GND
A_3.2V
BL_H
VAP_DD_ON
YAW_AD
VST_C_RESET
D_3.2V
REG_GND
KEY_AD1
BL_H
A_3.2V
BL_L
PITCH_AD
BL_L
REG_GND
REG_GND
G
CS
HCK2
R
B
VST
DWN
HCK1
VCK
RGT
COM
N.C.
EVF_VSSG
HST
PCG
VDD
REF
PSIG
EN
XSTB
XFC_RST_TR
IRIS_XA
LENS_TMP
FOCUS_XB
ZM_DC_MOTOR_+
ZM_DC_FG_1A
ZM_DC_MOTOR_+
XZM_RST_TR2
IRIS_B
SHUTTER_-
XZM_RST_LED2
ZM_RST_VCC2
SHUTTER_+
XZM_FG_LED
REG_GND
FOCUS_XB
XZM_RST_TR1
ZM_DC_MOTOR_-
IRIS_XB
FOCUS_XA
FOCUS_A
XZM_FG_TR
XFC_RST_LED
FOCUS_B
ZM_DC_FG_1B
ZM_SENS_2ND
FC_RST_VCC
ZM_FG_VCC
FC_SENS
IRIS_A
SHUTTER_+
FOCUS_A
XZM_RST_LED1
FOCUS_B
FOCUS_XA
SHUTTER_-
ZM_DC_MOTOR_-
ZM_SENS_1ST
ZM_RST_VCC1
Y_OUT P_DRIV_B P_OUT Y_DRIV_A A_4.6V Y_DRIV_B LENS_VC P_DRIV_A N.C. REG_GND
XSTRB_POPUP REG_GND REG_GND STRB_PLUNGER REG_GND STRB_PLUNGER
PL-039 BOARD
(1/2) FUNCTION SWITCH
(2/2) PITCH/YAW SENSOR AMP
PLUNGER
LENS COVER SW
BATTERY
CONTROL SWITCH BLOCK
(SW51780)
SPEAKER
2.5 INCH
LCD UNIT
COLOR EVF UNIT
N
17
F
104
H
21
D
18
M
91213
K
6 14 165
E
2
16
20
J
22
I
11 15
C
G
B
73 198
L
(1/11) LENS DRIVE
(2/11) CAMERA A/D CONV. TIMING GENERATOR
(3/11) CAMERA DSP,SYSTEM CONTROL
(4/11) 256Mbit SDRAM,FLASH MEMORY
(5/11) SUPER AND FLASH MEMORY
(6/11) A/V AND,USB/AV JACK,SP,MIC
(7/11) PANEL DRIVE
(8/11) STEADY SHOT CONTROL
(9/11) LENS SERVO
(10/11) CONNECTOR
(11/11) DC/DC CONVERTER
MIC
EVF,BACK LIGHT
CCD IMAGER
SY-CD RELAY
SY-SW RELAY
(CH-169 board) CCD SIGNAL PROCESS
AF LED,LENS COVER SW
VCC
VSS
DATA3
DATA1
VSS
SCLK
MS_BS
INT
SDIO/DATA0
DATA2 MEMORY
STICK
CONNECTOR
FLASH
FLASH DRIVE
MEMORY STICK,
LI BATTERY
SY-ST RELAY

CD-576 BOARD (CCD IMAGER) EV-016 FLEXIBLE BOARD (EVF, BACK LIGHT)
SW-006 FLEXIBLE BOARD (SY-SW RELAY)
MS-029 FLEXIBLE BOARD (SY-MS RELAY)
ST-001 FLEXIBLE BOARD (SY-ST RELAY)
FP-224 FLEXIBLE BOARD (SY-CD RELAY)
CONTROL SWITCH BLOCK (SW51780)
MS-275 BOARD (MEMORY STICK, LI BATTERY)
ST-123 BOARD (FLASH DRIVE)
ST-124 FLEXIBLE BOARD (FLASH)
PL-039 BOARD (PLUNGER)
SW-447 BOARD (1/2) (FUNCTION SW)
SW-447 BOARD (2/2)
(PITCH/YAW SENSOR AMP)
AF-102 FLEXIBLE BOARD
(AF LED, LENS COVER SW)
CD-576 BOARD (CCD IMAGER) EV-016 FLEXIBLE BOARD (EVF, BACK LIGHT)
SW-006 FLEXIBLE BOARD (SY-SW RELAY)
MS-029 FLEXIBLE BOARD (SY-MS RELAY)
ST-001 FLEXIBLE BOARD (SY-ST RELAY)
FP-224 FLEXIBLE BOARD (SY-CD RELAY)
CONTROL SWITCH BLOCK (SW51780)
MS-275 BOARD (MEMORY STICK, LI BATTERY)
ST-123 BOARD (FLASH DRIVE)
ST-124 FLEXIBLE BOARD (FLASH)
PL-039 BOARD (PLUNGER)
SW-447 BOARD (1/2) (FUNCTION SW)
SW-447 BOARD (2/2)
(PITCH/YAW SENSOR AMP)
AF-102 FLEXIBLE BOARD
(AF LED, LENS COVER SW)
WAVEFORMSCOMMON NOTE FOR SCHEMATIC DIAGRAMS WAVEFORMSCOMMON NOTE FOR SCHEMATIC DIAGRAMS
4-2. SCHEMATIC DIAGRAMS
Link
Link
DSC-H1