
MDR-Z1000
50 mm Polymer Film Diaphragm
Rigid, yet responsive Liquid Crystal Polymer Film diaphragms provide the needed rigidity and internal
loss for balanced and highly accurate sound reproduction time and again…
HD driver
Specially-engineered High Denition driver units in concert with Oxygen-free copper wound voice coils
and high-energy neodymium magnets (360 kJ/m³) provide for ultra-wideband (5 Hz - 80 kHz) audio
performance-smooth lows, rich mids, and extended highs.
Magnesium Housing
Built for precision sound engineering, the magnesium housing provides signicant strength with low
mass, greatly reducing unwanted vibration. The result is smooth bass response and clear mid-high
range sound reproduction.
Comfortable silence
Newly-developed noise isolating ear pads use pressure relieving urethane foam to cover the entire ear
for not only an outstanding t, but reduced ambient noise.
In the studio or on the go!
2 detachable headphone cables: 3 m and 1.2 m in length, provide for minimal signal loss and ultimate
performance!
Power Input
Resists high-power input, up to 4,000 mW.
Specications
Audio
Driver Unit 50 mm, dome type (HD, OFC Voice Coil) Liquid Crystal Polymer Diaphragm
Frequency Response 5 - 80,000 Hz
Impedance 24 ohms at 1 kHz
Sensitivity (db) 108 dB/mW
General
Case Type Carrying Pouch
Design Over-the-head, Monitor
Headband Wide, Adjustable, Single, folding ear cups
Magnet High-energy Neodymium (360 kJ/m³)
Plug Gold-plated, straight stereo UniMatch® plug with xed mini plug and detachable phone plug, 3.5 mm stereo mini jack;
UniMatch® adapter
Type of Use Portable, Home, Studio
Hardware
Cord Oxygen-Free Copper; Single-sided; 7N-OFC Litz cord adopted, detachable
Headphone Type Closed supra-aural, Dynamic