Sony DAV-DZ910W User manual

SUBWOOFER
SUR L
SUR R
FRONT R
CENTER
FRONT L
Main unit/
主機
4-165-519-41(1)
©2010 Sony Corporation Printed in China
(1)
Quick Setup Guide/快速設定指南
1Connecting the speakers/連接揚聲器
Rear panel of the main unit/
主機後面板
2Connecting your TV/set-top box/連接電視機/機上盒
To connect speaker cords to the center
speaker/
將揚聲器導線連接到中置揚聲器
Rear of the center speaker/中置揚聲器背面
DAV-DZ910W
First, assemble the speakers (refer to the Speaker Installation Guide), and then connect the speaker cords to match
the color of the SPEAKERS jacks of the unit.
先組裝揚聲器（請參閱揚聲器安裝指南），然後將揚聲器導線連接到本機上對應顏色的 SPEAKERS 插孔。
Depending on the jacks on your TV or set-top box, select the video and audio connection method.
視電視機或機上盒上的插孔而定，選擇視頻和聲音連接方法。
Connecting the video to your TV/將視頻連接至電視機
VIDEO
VIDEO
TV/CABLE
RL
AUDIO IN
EZW-RT10
ANTENNA
COXIAL 75
FM
COAXIAL
DIGITAL IN
OPTICAL
TV/CABLE
COMPONENT VIDEO OUT
P
B
/C
B
P
R
/C
R
Y
DIGITAL OUT
COAXIAL
OPTICAL
TV
AUDIO OUT L
R
TV/VIDEO
P
B
/C
B
P
R
/C
R
Y
COMPONENT VIDEO IN
HDMI IN VIDEO IN
VIDEO
OUT
OUT
ARC
Method 3*/
方法 3*
Method 2/
方法 2
Method 1/
方法 1
*Not supplied/*不提供
Connecting the audio from your set-top box/連接來自機上盒的聲音
If you do not use a set-top box, refer to “Connecting your TV/set-top box” in the Operating Instructions.
如果不使用機上盒，請參閱使用說明書中的“連接電視機 / 機上盒”。
AUDIO
AUDIO
COAXIAL
DIGITAL OUT
COMPONENT VIDEO OUT
P
B
/C
B
P
R
/C
R
Y
HDMI OUT VIDEO
OUT
EZW-RT10
ANTENNA
COXIAL 75
FM
TV
RL
AUDIO IN
DIGITAL OUT
COAXIAL
OPTICAL
TV
AUDIO OUT L
R
TV/VIDEO
L
R
AUDIO OUT
OPTICAL
DIGITAL OUT
DIGITAL
IN
OPTICAL
TV
Method 1*/
方法 1*
Method 2*/
方法 2*
*Not supplied/*不提供
For details, refer to the Operating Instructions.
詳細資訊，請參閱使用說明書。
Surround amplifier/
環繞放大器
SPEAKERS
FRONT R FRONT L
SUBWOOFER
CENTER
Green
綠色
Purple
紫色
Red
紅色
White
白色
Rear panel of the surround amplifier/
環繞放大器後面板
EZW-RT10
L
SURROUND BACK
IMPEDANCE USE
3-16
SURROUND SELECTOR
R
SPEAKERS
Blue
藍色
Gray
灰色

1 Press FUNCTION to display“TV.”
按 FUNCTION 鍵顯示“TV”。
2 Press SYSTEM MENU.
按 SYSTEM MENU 鍵。
3 Press /to display“SUR.SETTING,” then press
.
按 / 鍵顯示“SUR.SETTING”，然後按 鍵。
4 Press /to display“PRO LOGIC,” then press
.
按 / 鍵顯示“PRO LOGIC”，然後按 鍵。
5 Press SYSTEM MENU to exit the menu.
按 SYSTEM MENU 鍵退出菜單。
Listening to TV sound from all speakers/
從所有揚聲器聆聽電視機聲音
Note
Do not insert a disc before performing the Quick Setup.
請勿於執行快速設定之前插入光碟。
1 Switch the input selector on your TV to
display“SONY Home Theatre System.”
切換電視機上的輸入選擇器以顯示“SONY
Home Theatre System”。
2 Set each following item, using ///and .
使用 /// 鍵和 鍵，設定以下每個項
目。
///,
(ENTER)
Note
Displayed items vary depending on the area.
視地區而定，顯示項目會有不同。
Home Theatre System
Select an on-screen language.
選擇畫面語言。
LANGUAGE SETUP
MENU:
OSD:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
CHINESE 1
CHINESE 2
THAI
/,
Select the aspect ratio of
the connected TV.
選擇所連接電視機的
縱橫比。
VIDEO SETUP
PROGRESSIVE (COMPONENT OUT) :
TV TYPE:
4:3 OUTPUT:
COLOR SYSTEM (VIDEO CD) :
16:9
AUTO
PAUSE MODE:
16:9
4:3 LETTER BOX
4:3 PAN SCAN
/,
Select [ON] when you
connect the main unit and
the TV with an HDMI cable.
使用 HDMI 電纜連接
主機與電視機時，請
選擇 [ON]。
HDMI SETUP
HDMI RESOLUTION:
AUDIO RETURN CHANNEL:
AUTO (1920x1080p)
OFF
SD
YCBCR/RGB(HDMI):
VOLUME LIMIT:
YCBCR
JPEG RESOLUTION:
AUDIO(HDMI):
CONTROL FOR HDMI: ON
ON
OFF
/,
1 Insert the wireless transceiver.
裝入無線收發器。
EZW-RT10
L
PAIRING
ABC
SURROUND BACK
IMPEDANCE USE
3-16
SURROUND SELECTOR
R
SPEAKERS
S-AIR ID
SURROUND
COMPONENT VIDEO OUT
P
B
/C
B
P
R
/C
R
TV
EZW-RT10
VIDEO
OUT
RL
AUDIO IN
ANTENNA
COXIAL 75
FM
Y
Wireless transceiver
無線收發器
Wireless transceiver
無線收發器
2 Set the S-AIR ID switch to “A”and the
SURROUND SELECTOR switch to “SURROUND.”
將 S-AIR ID 開關設定為“A”、SURROUND
SELECTOR 開關設定為“SURROUND”。
EZW-RT10
L
PAIRING
A B C
SURROUND BACK
IMPEDANCE USE
3-16
SURROUND SELECTOR
R
SPEAKERSS-AIR ID
SURROUND
A SURROUND
3 Connect the AC power cord.
連接交流電源線。
CENTER
SPEAKERS
SUBWOOFER
FRONT R FRONT L
EZW-RT10
L
PAIRING
ABC
SURROUNDBACK
IMPEDANCEUSE
3-16
SURROUNDSELECTOR
R
SPEAKERS
S-AIR ID
SURROUND
4 Turn on the power of the main unit, the
surround amplifier, and the TV.
打開主機、環繞放大器和電視機的電源。
/
/
(power/電源)
S-AIR
/
STANDBY
/
Select the speaker
formation.
選擇揚聲器架構。
SPEAKER FORMATION
STANDARD
/,
MIC/A.CAL MIC AUDIO IN
Connect the calibration
mic and set it at the
listening position.
連接校正麥克風並設
定至聆聽位置。
Select [YES] to perform
[AUTO CALIBRATION].
選擇 [YES] 執行
[AUTO CALIBRATION]。
NO
Connect calibration mic. Start
measurement?
AUTO CALIBRATION
YES
/,
Select [YES] to save the
measurement results.
選擇 [YES] 儲存測量
結果。
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
“YES”.
3.00m 0.0dB
3.00m 0.0dB
3.00m 0.0dB
3.00m 0.0dB
3.00m 0.0dB
3.00m 0.0dB
Measurement complete.
NOYES
/,
QUICK SETUP is complete.
Home Theatre System
3Enabling wireless transmission/ 啓用無線傳送
4Performing the Quick Setup/執行快速設定