Sony BDV-IT1OOOES User manual

SONY:
«.
----- TM
S'u-ragD;sc
4-109-708-13(1)
BD/DVD Home Theatre System
Operating Instructions
BDV-IT1 OOOES/BDV-IS 1000
if
... ~
S A
-I-R DIGITAL II ------
- MEDIA Java"
DIGITAL WIRELESS '0 II T __
C2008 Sony Corporation

WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
Caution -The use ofoptical instruments
with this product will increase eye
hazard.
Do not install the appliance in aconfined space, such
as abookcase or built-in cabinet.
To reduce the risk
of fire, do not cover the ventilation
opening
of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources
such as lighted candles on the apparatus.
To reduce the risk
of fire or electric shock, do not
expose this apparatus to dripping
or splashing, and do
not place objects filled with liquids, such
as vases, on
the apparatus.
Do not expose batteries or apparatus with battery-
installed
to excessive heat such as sunshine, fire or the
like.
In door use only.
For the customers in the U.S.A
;i).. I RISK O:EllCTRIC SHOCK I !I\
~ DO NOT OPEN ~
CAUT1ON: TO REDUCE THE RISK Of= ELECTRIC SHOCK,
00 NOT REMOVE COVER (OR BACIQ.
NO USER-SER\llCEABlE PAATSINSIOE.
REFER SERVICING TO CUAU9ED SERVICE PERSONNEL
This symbol is intended to alert the user to
the presence
of uninsulated "dangerous
voltage" within the product's enclosure that
may be
of sufficient magnitude to constitute
arisk
of electric shock to persons.
This symbol
is intended to alert the user to
the presence
of important operating and
maintenance (servicing) instructions
in the
literature accompanying the appliance.
Owner's Record
The model and serial numbers are located at the rear
exterior
of the control unit. Record the serial number in
the space provided below. Referto them whenever you
call upon your Sony dealer regarding this product.
Model No. BDV-ITI
OOOESIBDV -IS 1000
Serial
No., _
Date
of Manufacture Marking is located on the rear
exterior.
The following FCC statement applies only
to the
version
of this model manufactured for sale in the
USA. Other versions may not comply with FCC
technical regulations.
WARNING
This equipment has been tested and found to comply
with the limits for aClass Bdigital device, pursuant to
Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference
in aresidential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user
is encouraged to try to correct the
interference by one or more
of the following measures:
-Reorient
or relocate the receiving antenna (aerial).
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on acircuit
different from that to which the receiver
is
connected.
-Consult the dealer or an experienced radiorrV
technician for help.
CAUTION
THIS CLASS BDIGITAL DEVICE COMPLIES
WITH PART
15 OF THE FCC RULES OPERATION
IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(I) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
You are cautioned that any changes or modifications
not expressly approved
in this manual could void your
authority to operate this equipment.
Important Safety Instructions
I) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.

5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install
in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves,
or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose
of the polarized or
grounding-type plug. Apolarized plug has two
blades with one wider than the other. Agrounding
type plug has two blades and athird grounding
prong. The wide blade or the third prong are
provided for your safety.
If the provided plug does
not fit into your outlet, consult an electrician for
replacement
of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
II) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When acart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing
is required when the apparatus has been
damaged in any way, such as power-supplycord or
plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain
or moisture, does not operate
normally,
or has been dropped.
For the wireless transceiver
(EZW-RT10)
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
This equipmentcomplies with FCC radiation exposure
limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement Cto OET65. This equipment should be
installed and operated with at least 20cm and more
between the radiator and person's body (excluding
extremities: hands, wrists, feet and ankles).
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40
of the NEC that
provides guidelines for proper grounding and,
in
particular, specifies that the cable ground shall be
connected to the grounding system
of the building, as
close to the point
of cable entry as practical.
Notice for the customers in
Canada
For the wireless transceiver
(EZW-RT10)
This class Bdigital apparatus complies with Canadian
ICES-OOJ.
This device complies with RSS-Gen
of IC Rules.
Operation
is subject to the following two conditions:
(I) this device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of this
device.
This equipment complies with IC radiation exposure
limits set forth for uncontrolled equipment and meets
RSS-102
of the IC radio frequency (RF) Exposure
rules. This equipment should be installed and operated
with at least 20cm and more between the radiator and
person's body (excluding extremities: hands, wrists,
feet and ankles).
Precautions
On power sources
•The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet (mains), even
if the unit itself has been turned
off.
•Install this system so that the AC power cord (mains
lead) can be unplugged from the wall socket
immediately in the event
of trouble.
Copyrights and Trademarks
•This product incorporates copyright protection
technology that
is protected by U.S. patents and other
intellectual property rights.
Use
of this copyright protection technology must be
authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision.
Reverse engineering
or disassembly is prohibited.
•This system incorporates with Dolby* Digital and
Dolby Pro Logic (II) adaptive matrix surround
decoder and the DTS** Digital Surround System.
*Manufactured under license from Dolby
Laboratories.
3
US

4
US
"Dolby", "Pro Logic", and the double-D
symbol are trademarks
of Dolby Laboratories.
** Manufactured under license under U.S. Patent
#'s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 &other U.S.
and worldwide patents issued &pending. DTS
is aregistered trademark and the DTS logos,
Symbol, DTS-HD and DTS-HD Master Audio
are trademarks
of DTS, Inc. ©1996-2008 DTS,
Inc. All Rights Reserved.
•This system incorporates High-Definition
Multimedia Interface
(HDMITM) technology.
HDMl, the HDMI logo and High-Definition
Multimedia Interface are trademarks
or registered
trademarks
of HDMI Licensing LLC.
•"BRAVIA"
is atrademark of Sony Corporation.
•"S-AIR" and its logo are trademarks
of Sony
Corporation.
•"AVCHD" and the "AVCHD" logo are trademarks
of
Matsushita Electric Industrial Co., Ltd. and Sony
Corporation.
•Java and all Java-based trademarks and logos are
trademarks
or registered trademarks of Sun
Microsystems, Inc.
•'!","XMB," and "xross media bar" are trademarks of
Sony Corporation and Sony ComputerEntertainment
Inc.
•"PLAYSTATION" is atrademark
of Sony Computer
Entertainment Inc.
•"Blu-ray Disc" is atrademark.
•"Blu-ray Disc," "DVD+RW," "DVD-RW,"
"DVD+R," "DVD-R," "DVD VIDEO," and "CD"
logos are trademarks.
•"x.v.Color" and "x.v.Color" logo are trademarks
of
Sony Corporation.
•"PhotoTV HD" and the "PhotoTV HD" logo are
trademarks
of Sony Corporation.
•Other system and product names are generally
trademarks or registered trademarks
of the
manufacturers. ™and ®marks are not indicated in
this document.
About This Operating
Instructions
•The instructions in this Operating Instructions
describe the controls on the remote. You can
also use the controls onthe unit
if they have the
same
or similar names as those on the remote.
•Icons, such as
_, listed at the top of each
explanation indicate what kind
of media can be
used with the function being explained.
For details, see "Playable Discs" (page 130).
•In this manual, "disc"
is used as ageneral
reference for the BDs, DVDs,
or CDs unless
otherwise specified by the text or illustrations.
•The instructions in this manual are for BDV-
ITlOOOES and BDV-ISIOOO. BDV-ITlOOOES
is the model used for illustration purposes.
Any difference in operation is clearly indicated
in the text, for example, "BDV-ITlOOOES."
•The Control Menu items may vary depending
on the area.
•Measurements are expressed in feet
(ft) for
North American models.
•The default setting is underlined.

About the S·AIR function
The system is compatible with the S-AIR
function, which allows transmission
of sound
between S-AIR products wirelessly.
The following S-AIR products can be used with
the system:
•Surround amplifier (supplied): You can enjoy
surround speaker sound wirelessly.
•Surround back amplifier (optional): You can
enjoy surround back speaker sound wirelessly.
•S-AIR receiver (optional): You can enjoy
system sound in another room.
The S-AIR product can be purchased as an
option (the S-AIR product lineup differs
depending on the area).
Notes
or instructions for the surround amplifier
or S-AIR receiver
in this operating instructions
refer only to when the surround amplifier or
S-AIR receiver is used.
Fordetails on the S-AIRfunction, see "Using an
S-AIR Product" (page 89).
5
US

Table of Contents
About This Operating Instructions 4
About the S-AIR function 5
Index to Parts and Control 7
Getting Started
Step 1: Assembling
the Speakers 18
Step 2: Positioning the System 28
Step 3: Connecting the System 43
Step 4: Setting up the Wireless
System 58
Step 5: Performing the Easy
Setup 60
Step 6: Enjoying Sound by Each
Function 64
Playback
Playing a BD/DVD 65
Playing a CD 73
Playing Photo Files 75
Sound Adjustment
Enjoying Surround Sound 77
Selecting the Sound Mode 80
Changing the Sound
81
Tuner
Listening to the Radio 83
External Audio Device
Using the DIGITAL MEDIA PORT
Adapter 88
Using an S-AIR Product 89
Other Operations
Using the Control for HDMI Function for
"BRAVIA" Sync 95
Calibrating the Appropriate Settings
Automatically 98
Setting the Speakers 100
Controlling the TV or Other Components
with the Supplied Remote
101
Using the Sound Effect 105
Using the Sleep Timer 106
Deactivating the Buttons on
the Unit 106
Settings and Adjustments
Using the Setup Display 107
[Network Update] 108
[Video Settings] 109
[Audio Settings]
III
[BD/DVD Viewing Settings] 112
[Photo Settings] 114
[HDMI Settings] 114
[System Settings] 116
[Network Settings]
117
[Easy Setup]........................................ 118
[Resetting] 119
Additional Information
Precautions 120
Notes about the Discs.........................
121
Troubleshooting 122
Self-diagnosis Function 129
Playable Discs 130
Supported Audio Formats
133
Video Output Resolution 134
Specifications
135
Language Code List.. 139
Terms and Conditions
of Use and End
User License Agreement 140
Software License Information 142
Glossary
151
Index 154

Index to Parts and
Control
For more information, refer to the pages
indicated in parentheses.
• [§QJ: For system operations
• CIYJ: For TV operations
• I STB I: For set-top box/digital satellite
receiver/Sony component (such as VCR,
or
DVD player/recorder, etc.) operations
(For details, see "Controlling the
TV or Other
Components with the Supplied Remote"
(page
10 I).)
FAVORfTES CC WIlE
.MJOK) SUBTITlE ANGLE TV tlPUT
With the cover opened.
II] THEATER (96) OD
Switches to the optimum video mode for
watching movies automatically.
ONE-TOUCH PLAY (65,96) [§QJ
By only pressing the button, the TV turns
on, the TV is set for BDIDVD input
selector, and the system starts playing adisc
automatically.
AV 116 (on/standby) (101) OD
I STB I
Turns on the connected component such as
the
TV or set-top box/digital satellite
receiver,
or set to standby mode.
116 (on/standby) (60, 65, 83) [§QJ
Turns on the system, or set to standby
mode.
[l] ~ (open/close) (65) ~
Opens or closes the disc tray.
OPERATION CHANGE (16, 101)
Changes the source to be operated on the
remote.
I STB I:You can operate set-top box/digital
satellite receiver.
OD: You can operate TV.
[§QJ :You can operate the unit.
~ Number buttons (65, 84, 101) ~
OD ISTBI
Enters the title/chapter numbers or radio
frequencies, etc.
CLEAR (70, 101) ~ OD I STB I
Clears the entry field.
TIME (71) ~
Displays the elapsed/remaining playback
time in the front panel display.
ENTER (101) OD I STB I
Enters the selected item.
~ TOPE NIGKT 0 DlSPtA
ILJI 101 101101
RED~~~
101 101 101101 HI---t
TUNER
SLEEP MENU TUNI'.aQ
(CJ) CCD (CJ)
S~ DE~G ~R£COR~R- U--..I
0000
DISPlAY
a
For details of using the remote, see "Using the
remote" (page 16).
Number 5, FAVORITES/AUDIO,
CH +, and
[:::::> buttons have atactile dot. Use the tactile dot
as areference when operating.
7
US

8
US
@J
AUDIO (81) emu
[l] TOP MENU (69)
emu
Selects the audio format/track. Opens or closes the BD's or DVD's Top
SUBTITLE (68) emu
Menu.
Selects the subtitle language when multi- POP UP/MENU (69)
emu
lingual subtitles are recorded on aBD- Opens or closes the BD-ROM'sPop-up
ROMlDVD VIDEO. Menu, or the
DVD's menu.
ANGLE (68) emu OPTIONS (65, 73, 75, 83) emu I STB I
Switches to other viewing angles when Displays the options menu that can be
multi-angles are recorded on a
BD-ROMI selected appears on the TV screen.
DVDVIDEO.
HOME (60, 65, 73, 75, 83, 89, 98, 107)
TV INPUT (101)
c:::!YJ
emu c:::!YJ I STB I
Switches the TV's input source between the Enters or exits the system's home menu.
TV and other input sources. RETURN (83, 101, 117)
emu c:::!YJ
FAVORITES (101) em
I STB I
Displays the favorite channel list. Returns to the previous display.
CC (101) c:::!YJ
~/~/~/~(60,65, 73, 75,83,89,98,107)
Changes the subtitle of the TV.
emu c:::!YJ I STB I
WIDE (101) c:::!YJ
Moves the highlight to select adisplayed
Changes the aspect ratio
of the connected item.
TV. e(ENTER) (60, 65, 73, 75, 83, 89, 98,
[§] SCENE SEARCH (70)
emu
107) emu c:::!YJ I STB I
Switches to Scene Search mode that lets Enters the selected item.
you move quickly between scenes within GUIDE (101)
c:::!YJ
the title currently being played back. Displays the Digital Electronic Programme
TONE (105) emu
Guide (EPG).
Adjusts the sound by changing the TOOLS (101)
c:::!YJ
frequency envelope of asound. Displays the operation menu for the current
NIGHT (105) emu
display.
Activates the night mode function.
rID
FUNCTION (60, 64, 65, 73, 75, 83, 88)
oDISPLAY (71) emu
emu
Displays the playback information on the Selects the playback source.
TV screen. SOUND MODE (80)
emu
rnJ
Color buttons (RED/GREEN/BLUE! Selects asuitable sound mode for movies or
YELLOW) (85, 117) emu
music.
Short cut keys for selecting items on some
BD's menus (can also be used for BD's
Java interactive operations).

lID ~/~ (previous/next) (65, 73, 75)
CID[] CTIJ
Skips to the previous/next chapter, track, or
file. To go to the beginning
of the previous
track, press
..... twice.
PRESET +/- (83) CID[]
Selects the preset radio station.
... / ... REPLAY/ADVANCE (65)
CID[] CTIJ I STB I
Replays the scenelbriefly fast forwards the
scene.
.... /~ (fast reverselfast forward) (65,
73) CID[] CTIJ I
STB I
Fast reverses/fast forwards the disc when
pressed during playback.
Each time you press the button, search
speed changes.
To resume normal speed, press C:>.
TUNING +/- (83) CID[]
Searches the radio station.
c> (play) (65, 73, 75) CID[] CTIJ
I STB I
Starts or re-starts playback.
Plays aslideshow when adisc containing
IPEG image files is inserted.
.. (pause) (65, 73, 75) CID[] CTIJ
I STB I
Pauses or re-starts playback.
• (stop) (65, 73, 75) CID[] CTIJ
I STB I
Stops playback and remembers the stop
point (resume point).
The resume point for atitle/track
is the last
point you played
or the last photo for a
photo folder.
S-AIR MODE (89) CID[]
Selects playback mode for the S-AIR
receiver.
11m MUTING (65, 73, 101) CID[] CTIJ
Turn off the sound temporarily.
VOLUME +/- (65, 101) CID[] CTIJ
Adjusts the volume.
CH +/- (101) CTIJ I STB I
Selects the channels up and down.
[1] SLEEP (106) CID[]
Sets the sleep timer.
TUNER MENU (86) CID[]
Enters the menu for the tuner settings.
DIRECT TUNING (86) CID[]
Selects the radio frequencies.
AN SYNC (73) [![]
Adjusts the delay between the picture and
sound.
DECODING MODE (77) [![]
Selects the system's pre-programmed
decoding modes that bring exciting and
powerful sound
of movie theaters into your
home.
DISPLAY(83) [![]
Changes the radio information in the front
panel display between radio frequency and
station name.
DVD RECORDER (101) I STB I
Changes the operation mode for Sony OVO
recorders.
HOD: HOD mode
DVD: DVD mode
gus

,. Front pane':
., ~. ~ : ...
12
IlL
III
\.
,I
..
•''''''''''' -
~:,iME
•II
V
r
(1
liO'-tl
So·AI"
lJ
87 6 543
10
US
[I] 1/6 (on/standby) (65)
Turns on the unit, or sets to standby mode.
~ Soft-touch buttons (65)
These buttons work by touching lightly
around the printed area
or projecting part.
Do not press them strongly.
l> (play)
Starts or re-starts playback.
Plays aslideshow when adisc containing
lPEG image files is inserted.
•(stop)
Stops playback and remembers the stop
point (resume point).
The resume point for atitle/track is the last
point you played or the last photo for a
photo folder.
FUNCTION
Selects the playback source.
VOLUME +/-
Adjusts the system's volume.
~ (open/close)
Opens or closes the disc tray.
~ S-AIR indicator
Lights up when the S-AIR transceiver is
inserted in the unit and the systemtransmits
the sound.
[AJ HDMI indicator
Lights up when the HDMI OUT jack is
correctly connected to HDCP (High-
bandwidth Digital Content Protection)
compliant device with HDMI
or DVI
(Digital Visual Interface) input.
[§] DISC indicator
Flashing: The system is loading adisc.
Lighting up: Adisc is loaded. (When no
disc is loaded, the DISC indicator is not lit.)
lID Front panel display
[l] Disc tray (65)
lID III (remote sensor) (16)

About the indications in the front panel display
6 7
SLEEP
-! .-: .-: .•.:
.-- ..
....
I. =-- :... .. _.
32
DO D+ EX DO TrueHD
DTS - HD MSTR HI RE
DTS - ES 96/ 24
MATRIX L-PC
mPlaying
status
lID
Lights up when the system is
[gJ
Lights up when astation is received. accessing the network.
(Radio only) (83)
~
Lights up when outputting 1920 x
~Monaural/Stereo effect (Radio only) 1080p/24Hz video signals.
(83) ~
Lights up when the night mode is on.
@]
Lights up when theexternal memory is
(105)
recognized. (55) [1]
Lights up when the HDMIIN1 or 2 jack
[§]
Lights up when outputting 720p/1080i/ is
correctly connected to HDCP (High-
1080p video signals
from the HDMI bandwidth Digital Content Protection)
OUT jack
or 720p/1080i video signals
compliant device with HDMI or DVI
from the COMPONENT VIDEO OUT (Digital Visual Interlace) output.
jacks. ~
Current sound format
lID
Flashes when the sleep timer is set.
(106)
[l]
Displays system's status such as
chapter, title,
or track number, time
information, radio frequency, playing
status, decoding mode, etc.
11 us

BDV·IT1000ES
1 2 3
BDV·IS1000
123
000
., ,
SI\TfCABlE
SPEAKER
ROIl fAOllT WOOfIR WOOFS!.
1
[I] LAN (100) terminal (56)
[g] COMPONENT VIDEO IN (SAT/CABLE)
jacks (50)
~ COMPONENT VIDEO OUT jacks (48)
@] VIDEO OUT (VIDEO, SVIDEO) jacks
(48)
[ID HDMIIN1/2 jacks (50)
rnJ IR REMOTE (IN, OUT) (16) (BDV-
IT1000ES
only)
I1J DIGITAL IN (TV OPTICAL) jack (48)
rnJ DIGITAL IN (SAT/CABLE OPTICAL,
COAXIAL)
jacks (50)
[ID EZW-RT10 slot (54)
[Q] AM terminal (53)
[j] FM 75Q COAXIAL jack (53)
[g] HDMI OUT jack (48)
~ DMPORT (DIGITAL MEDIA PORT) jack
(50)
IHl A.CAL MIC jack (60, 98)
Ml SAT/CABLE IN (VIDEO, AUDIO R/L)
jacks (50)
11m TV (AUDIO IN R1L) jacks (48)
I1II EXTERNAL slot (55)
1m SPEAKER jacks (45)
12
US

Front panel
Rear panel
12
POWER
POWEF/JON UHE
PHONES
3
rn PHONES jack (58)
[ZJ POWER (ON/OFF) (58, 92)
@I POWER ION LINE indicator (58, 89)
@] PAIRING indicator (92)
I]] PAIRING (92)
lID Wireless transceiver (EZW-RT10) slot
(54)
[l] S-AIR 10 switch (58, 89)
[ID SPEAKER L jack (45)
lID SPEAKER R jack (45)
l1QI SURROUND SELECTOR switch (58, 92)
13
US

~looooIIIOOOOO
o 0000 O~Oo
o 0000 ~OO
•Video cord (I)
•Surround amplifier (1)
•Calibration mic
(I)
•Speaker cord cover (I)
•R6 (size AA) batteries (2)
•Remote commander
(remote)
(l)
•Speaker cord holder (I)
•Wireless transceivers for the
unit (2)
•Operating Instructions
•Basic connections (card)
IIII11
iiiii
•Screws (5)
•Wall mounting brackets
(top) (5)
•Bracket covers (10)
•Foot pads (thick 2, thin
2)
•AM loop antenna (aerial) (l)
•Wall mounting brackets
(bottom) (5)
•FM wire antenna (aerial)
(l)
]n
•Speaker cords (6, white/red!
blue/gray/greenlpurple)
14
US
UnpC!cking
Getting Started
•Surround speakers (2)
•Baffle covers (short 3, long
2)
•Center speaker (I )
•Desktop stands (4)
BDV·IT1000ES
•Subwoofer (I)
•Front speakers (2)
~~
r.::::i]~
•Grilles (5)

L
15
US
•Speaker cord holder (I)
•Wireless transceivers for the
unit (2)
•Operating Instructions
•Basic connections (card)
•Surround amplifier
(I)
•Wrench (I)
•Speaker cord cover ( I)
£)
•Remote commander
(remote)
(I)
•FM wire antenna (aerial) (I)
•Calibration mic (I)
•Brackets (5)
•R6 (size AA) batteries (2)
•Video cord (
I)
•AM loop antenna (aerial) (I)
•Subwoofer (I)
•Front speakers (2), center
speaker ( I), and surround
speakers (2)
BDV·IS1000
em
•Unpack the speakers, being careful not to touch the speakerunits.
•Keep speakers away from one another. Speakers are magnetically attracted, may hit each other, and cause damage.
•Keep magnetic objects such as watches, magnetic card, etc., away from the speakers.

Gc::::JG
C'} to ('f>
..
•System operation
Press BD (BD lights up for Isecond).
The remote enters system operation mode, and BD lights up when you press buttons for operation.
When operating the system, point the remote at the remote sensor
II on the unit.
•TV operation
Press TV (TV lights up for Isecond).
The remote enters TV operation mode, and TV lights up when you press buttons for operation (TV does
not light up when you press abutton that
is not available for the TV).
To operate the TV, set the remote signal to suit your TV. For details, see "Controlling the TV
or Other
Components with the Supplied Remote" (page
10 I).
16
US
About operation of the remote
You can operate this system, TV, and set-top box/digital satellite receiver using the supplied remote.
Change the operation mode by using OPERA
nON CHANGE.
Inserting batteries into the remote
Insert two R6 (size AA) batteries (supplied) by matching the <±> and eends on the batteries to the
markings inside the compartment.
-
•Do not leave the remote in an extremely hot or humid place.
•Do not use anew battery with an old one.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•Ifyou do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.

•Set-top box/digital satellite receiver/Sony component (such as VCR, DVD player/recorder,
etc.) operation
Press STB (STB lights up for Isecond).
The remote enters set-top box/digital satellite receiver operation mode, and STB lights up when you
press buttons for operation (STB does not light up when you press abutton that is not available for the
set-top box/digital satellite receiver).
To operate the set-top box/digital satellite receiver/Sony Component, set the remote signal to suit your
set-top box/digital satellite receiver. For details, see "Controlling the TV or Other Components with
the Supplied Remote" (page
10 I).
Em
•Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause amalfunction.
To use the remote at a distance from the system
(BDV-IT1000ES only)
You can use the remote away from the system by connecting an IR repeater system (not supplied) to
the unit. Use this optional item when you install the unit in aplace where the remote signal cannot be
received.
Rear panel of the unit
IR repeater system
0000
OO~
880
000
==
oc::co
0=0
000
17
US

Step 1: Assembling the Speakers
(BDV-IT1000ES only)
Before connecting the speakers, assemble the speakers.
Caution on using the speakers
When moving the speakers, keep one hand under the desktop stand and hold both sides ofthe speaker,
as in the illustration.
The following actions may damage the speaker.
-Toppling the speaker.
-Shaking the speaker.
-Swinging the speaker.
-Pushing on the speaker.
-Hitting the speaker
Speaker assembly
Use the parts as follows:
•Front speakers (2)
•Surround speakers (2)
•Center speaker (I)
•Speaker cords (5, white/red/blue/gray/green)
•Desktop stands (4)
•Baffle covers (short 3, long
2)
•Grilles (5)
Although the front part
of the front speaker is slightly different from that of the surround speaker, the
assembly method is the same. (The illustrations in the following steps are for the front speakers.)
About how to connect the speaker cords, see page 45.
18
US

Speaker unit
19
U5
Ex. Front speaker
Bottom of the desktop stand
~ ...
Speaker cord
How to identity the speakers
Check the label on the speaker.
•Front left speaker (L): FRONT L(white)
•Front right speaker (R): FRONT R(red)
•Surround left speaker (L): SUR L(blue)
•Surround right speaker (R): SUR R(gray)
•Center speaker: CENTER (green)
CD
•Spread acloth on the floor to avoid damaging the floor when you assemble the speakers.
•When assembling, take care not to touch the speaker units.
Front and surround speakers
1Thread the speaker cord through the hole in the bottom of the desktop stand.
iir:J
•You can install the front, center, and surround speakers on awall by using the wall mounting bracket (supplied)
(page 33).
In this case, you do not need to attach the desktop stand to the speaker.
•You can install the front and surround speakers directly on the floor by attaching speaker stands (WS-ITlOOOF
(optional».

2Remove the screw from the speaker.
The removed screw is used when attaching the desktop stand. Be sure not to lose the screw.
Surround speaker
-
•When assembling, take care not to touch the speaker unit.
20
US