Sony BDV-N9200W User manual

BDV-N9200W
BDV-N9200W
BDV-N7200W
Blu-ray Disc™/DVD Home Theatre System
Start here
Quick start guide
GB
BDV-N7200W

2
3
4
5
1What’s in the box/Setting up the speakers
Connecting your TV
Connecting other devices
The on-screen Easy Setup
Playback and using other functions
 Main unit
Front speakers
Surround speakers
Center speaker
Subwoofer
Surround amplifier


 


BDV-N9200W


   


BDV-N7200W

03
or
What’s in the box
R03 (size AAA) batteries (2)
Remote control
Screws (small)Screws (large)
(BDV-N9200W only (4))
FM wire antenna (aerial) Calibration mic
Speaker cords (5)
(BDV-N9200W(12)) (BDV-N7200W(8))

04
Start by positioning the speakers
according to the labels on the rear
panel .
You can also set the speakers in
[All Front] position . For further
details, visit:
http://support.sony-europe.com/


1

05
Next, connect the speakers to the
main unit and surround amplifier.
Refer to the supplied “Speaker
Installation Guide” for assembling
the speakers.

06
To enjoy high-quality video and
audio, connect via a High Speed
HDMI cable (not supplied) and
an optical digital cord (not
supplied).
However, if your TV has an HDMI
ARC (Audio Return Channel) jack,
you do not need an optical digital
cord (not supplied).
 
Connecting TV with no HDMI ARC jack Connecting TV with an HDMI ARC jack
2

07
To connect your set-top box,
game console, or digital satellite
receiver, simply connect with an
HDMI cable (not supplied).
For FM radio, connect the
supplied FM wire antenna (aerial)
and extend it for the best
reception.
or
 
3

08



You can connect to the Internet
and home network via a wireless
LAN or LAN cable (not
supplied).
Network settings can be found in
the home menu (page 13).
For further details, visit:
http://support.sony-europe.com/
Connect the AC power cords
(mains leads) of the main unit
and surround amplifier to a wall
outlet (mains).
To a broadband router
3

09
Connect the calibration mic and
place where you would normally
sit.
This will be used to optimize the
speakers in the next section to
give you the best possible
surround sound experience. The
mic can be fully removed once
this process is complete.
4

10
///,
/
Press /to turn the system on.
“SETUP” appears in the top panel
display.
To ready the system for use, go
through the on-screen Easy Initial
Settings using the supplied
remote. This should only take a
few minutes.
If the setup screen is not
displayed, select the correct AV
input in your TV.
Once [Easy Initial Settings are
complete.] appears on the screen,
select [Finish] and the system is
ready to use.
4