Sony BDV-T10 - Blu-ray Disc™ / Dvd Home Theater... User manual

SON~
- ........ ~TM
S/u-ragD;sc
4-147-229-13(1)
BD/DVD Home Theatre System
Operating Instructions
BDV-T10 / T11 /E300
~
DIGITAL I) ------ BD~
MEDIA Java ,LIVEn.
P0 R T POWERED_
©2009 Sony Corporation

WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
Do not instalI the appliance in aconfined space, such
as abookcase
or built-in cabinet.
To reduce the risk
of fire, do not cover the ventilation
opening
of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources
such as lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping
or splashing, and do
not place objects filIed with liquids, such
as vases, on
the apparatus.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or the
like.
To prevent injury, this apparatus must be securely
attached to the floor/walI
in accordance with the
instalIation instructions.
Indoor use only.
CAUTION
The use of optical instruments with this product wilI
increase eye hazard. As the laser beam used
in this BD/
DVD Home Theatre System
is harmful to eyes, do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
(.l.!JTlO~i (t~: f.; ;,".t::-:.: ~!it'!"i~I.:H.:: ;..t":tfo!l);.'l,:I(l-lV,ii8ji;;"f1i
;";::''{·~fc~£!rr·p.:::Lf.(.
'iUi:-lCitr ::,::.~(;F. 'I~:(,~··r(t-j:' l·t~;I·):Ii'~,=( I ~'li"::'7:'."'~_': ~.I M)i,
:,H.f;!t'.';::I,1: I· _~*!il.1'1..~U:;1':.J': ·."1~J.!l;IDt~.
~~1V.;~5fi '}'tit"> :;'.. ~::,:·!"U';' _~'i;;~lP.~J'(,~; • .!.l~X'p. {t:.• .I,.~,j/<:,
:!iI:"'~;,[-l. 1"I~:~ri~I'~I~N,
'",,\1.\;, "''',C",o,,",,,
~'A:l~m'f: ~X:· 2", 'J"W', '.'.;~ ll:.(;1;J, U··.t.i': i!'),L~,I'f,; ~,~, "'~~·':l~ ~tL .~J:
" .. P ... o, '.J'n'll- ',:1 :"l'l',l f·'mifl·;·tf,,;',H;:;}<3" .t, ~I:li·!.
•As the main plug is used to disconnect the unit from
the mains, connect the unit to an easily accessible AC
outlet. Should you notice
an abnormality in the unit,
disconnect the main plug from the AC outlet
immediately.
For the customers in the U.S.A.
This symbol is intended to alert the user to
the presence
of uninsulated "dangerous
voltage" within the product's enclosure that
may be
of sufficient magnitude to constitute
arisk
of electric shock to persons.
This symbol
is intended to alert the user to
the presence
of important operating and
maintenance (servicing) instructions
in the
literature accompanying the appliance.
Owner's Record
The model and serial numbers are located at the rear
exterior
of the control unit. Record the serial number in
the space provided below. Refer to them whenever you
calI upon your Sony dealer regarding this product.
Model No. BDV-TIOIBDV-TIIIBDV-E300
Serial No. _
The following FCC statement applies only to the
version
of this model manufactured for sale in the
USA. Other versions may not comply with FCC
technical regulations.
This label
is located on the laser protective housing
inside the enclosure.
On power sources
•The unit is not disconnected from the mains as long
as
it is connected to the AC outlet, even if the unit
itself has been turned off.
2
US
..
CLASS 1LASER PRODUCT
LUOKAN 1LASERLAITE
KLASS 1LASERAPPARAT
Precautions
This appliance is
classified as aCLASS I
LASER product. This
marking
is located on the
rear exterior.
NOTE:
This equipment has been tested and found to comply
with the limits for aClass Bdigital device, pursuant to
Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference
in aresidential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause
harmful interference to radio or television reception,
which can be determined
by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one
or more of the following measures:
-Reorient
or relocate the receiving antenna (aerial).

plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain
or moisture, does not operate
normally,
or has been dropped.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on acircuit
different from that to which the receiver
is
connected.
-Consult the dealer
or an experienced radiolTV
technician for help.
CAUTION
You are cautioned that any changes or modifications
not expressly approved
in this manual could void your
authority to operate this equipment.
11411;141618
ENERGY STAR® is aU.S.
registered mark.
As an ENERGY STAR® partner,
Sony Corporation has determined
that this product meets the ENERGY
STAR®guidelines for energy
efficiency.
Important Safety Instructions
I) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)
Do notdefeat the safety purpose of the polarized or
grounding-type plug. Apolarized plug has two
blades with one wider than the other. Agrounding
type plug has two blades and athird grounding
prong. The wide blade or the third prong are
provided for your safety.
If the provided plug does
not fit into your outlet, consult an electrician for
replacement
of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When acart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or
Copyrights and Trademarks
•This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights.
Use
of this copyright protection technology must be
authorized by Macrovision, and
is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision.
Reverse engineering
or disassembly is prohibited.
•This system incorporates with Dolby* Digital and
Dolby Pro Logic (II) adaptive matrix surround
decoder and the DTS** Digital Surround System.
*Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", and the double-D
symbol are trademarks
of Dolby Laboratories.
** Manufactured under license under U.S. Patent
#'s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 &other U.S.
and worldwide patents issued &pending.
DTS
is aregistered trademark and the DTS
logos, Symbol, DTS-HD and DTS-HD Master
Audio IEssential are trademarks
of DTS, Inc.
©1996-2008 DTS, Inc. All Rights Reserved.
•This system incorporates High-Definition
Multimedia Interface
(HDMITM) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks
or registered
trademarks
of HDMI Licensing LLC.
•Java and all Java-based trademarks and logos are
trademarks
or registered trademarks of Sun
Microsystems, Inc.
•"BD-Live" and "BonusView" are trademarks
of Blu-
ray Disc Association.
•"Blu-ray Disc"
is atrademark.
•"Blu-ray Disc," "DVD+RW," "DVD-RW,"
"DVD+R," "DVD-R," "DVD VIDEO," and
"CD"
logos are trademarks.
•
"BRA VIA" is atrademark of Sony Corporation.
3
uS

4
US
• "A YCHD" and the "A YCHD" logo are trademarks of
Matsushita Electric Industrial Co., Ltd. and Sony
Corporation.
•"S-AIR" and its logo are trademarks
of Sony
Corporation.
• ·1", "XMB," and "xross media bar" are trademarks of
Sony Corporation and Sony ComputerEntertainment
Inc.
•
"PLA YSTA nON" is atrademark of Sony Computer
Entertainment Inc.
•"x.v.Color" and "x.v.Color" logo are trademarks
of
Sony Corporation.
•"PhotoTY HD" and the "PhotoTY HD" logo are
trademarks
of Sony Corporation.
•Other system and product names are generally
trademarks or registered trademarks
of the
manufacturers. ™and ®marks are not indicated
in
this document.
About These Operating
Instructions
•The instructions in these Operating
Instructions describe the controls on the
remote. You can also use the controls on the
unit if they have the same or similar names
as
those on the remote.
•Icons, such as
., •• ,listed at the top of each
explanation indicate what kind
of disc can be
used with the function being explained.
For details, see "Playable Oiscs" (page 96).
• In this manual, "disc" is used as ageneral
reference for the BOs, OVOs, or COs unless
otherwise specified by the text or illustrations.
•The instructions in this manual are for BOV-
TlO,
BOV-Tll, and BOV-E300. BOV-TlO is
the model used for illustration purposes. Any
difference
in operation is clearly indicated in
the text, for example, "BOV- TI 0."
•The Control Menu items may vary depending
on the area.
•The default setting is underlined.

About the S·AIR function
The system is compatible with the S-AIR
function, which allows transmission
of sound
between S-AIR products wirelessly.
The following S-AIR products can be used with
the system:
•Surround amplifier: You can enjoy surround
speaker sound wirelessly.
•Surround back amplifier: You can enjoy
surround back speaker sound wirelessly.
•S-AIR receiver: You can enjoy system sound
in another room.
The S-AIR products can be purchasedas options
(the S-AIR product lineup differs depending on
the area).
Notes or instructions for the surround amplifier,
surround back amplifier, or S-AIR receiver in
these Operating Instructions refer only to when
the surround amplifier, surround backamplifier,
or S-AIR receiver is used.
Fordetails on the S-AIR function, see "Using an
S-AIR Product" (page 56).
5
US

6
US
Table of Contents
About These Operating Instructions .4
About the S-AIR function 5
Unpacking 7
Index to Parts and Control
11
Getting Started
Step 1: Installing the System 16
Step 2: Connecting the System 20
Step 3: Performing the Easy
Setup 29
Step 4: Selecting the Source 32
Step 5: Enjoying Surround
Sound 33
Playback
Playing aBDIDVD 36
Enjoying BonusView/BD-Live .43
Playing aCD 44
Playing Photo Files .45
Sound Adjustment
Selecting the Effect to Suit
the Source 47
Selecting the Audio Format, Multilingual
Tracks, or Channel.. .48
Enjoying Multiplex Broadcast
Sound 49
Using the Sound Effect .49
Tuner
Listening to the Radio 51
External Audio Device
Using the DIGITAL MEDIA PORT
Adapter
55
Using an S-AIR Product 56
Other Operations
Using the Control for HDMI Function for
"BRAVIA" Sync 63
Calibrating the Appropriate Settings
Automatically 66
Setting the Speakers 67
Controlling Your TV with the Supplied
Remote 69
Using the Sleep Timer
71
Changing the Brightness of the Front
Panel Display
71
Deactivating the Buttons on the Unit 72
About the demonstration 72
Saving Power in Standby Mode 73
Settings and Adjustments
Using the Setup Display 74
[Network Update] 75
[Video Settings] 76
[Audio Settings] 78
[BDIDVD Viewing Settings] 80
[Photo Settings] 82
[HDMI Settings] 82
[System Settings]
83
[Network Settings] 84
[Easy Setup]
85
[Resetting] 86
Additional Information
Precautions 87
Notes about the Discs 88
Troubleshooting 89
Self-diagnosis Function 95
Playable Discs 96
Supported Audio Formats 98
Video Output Resolution 99
Specifications 100
Language Code List.. 102
Terms and Conditions
of Use and End
User License Agreement..
103
Software License Information 105
Glossary 114
Index
117

Unpacking
BDV·T10
•Front speakers (2)
•Surround speakers (2)
•Center speaker
(1)
•Subwoofer (1)
•AM loop antenna (aerial) (1)
•FM wire antenna (aerial) (1)
~L5r] _3
I:::! or
'~
•Speaker cords (5, white/red!
blue/gray/green)
II1I1
•Video cord (1)
•Remote commander
(remote)
(I)
°1°000110°0000 °
~ 0000 . gOo~
o 0000 0000 ~
•R6 (size AA) batteries (2)
•Calibration mic
(1)
•Foot pads (1 set)
•Operating Instructions
•Speaker and TV Connections
guide
•Setup Disc (DVD)
•DIGITAL MEDIA PORT
adapter (TDM-iP20)
(1)
•Operating Instructions for
the DIGITAL MEDIA
PORT adapter (TDM-iP20)
7
US

8
US
BDV·T11
•Front speakers (2)
•Surround speakers (2)
•Center speaker
(I)
•Subwoofer (I)
•AM loop antenna (aerial) (I)
•FM wire antenna (aerial) (I)
Ht-~,,<e~
t:.! --.
or
•Speaker cords (5, white/redJ
blue/gray/green)
IIII1
•Video cord (1)
•Remote commander
(remote)
(I)
°IOOODII~OOOO~
~ 0000 . gOo
DoooD oooo~
•R6 (size AA) batteries (2)
•Calibration mic
(I)
•Foot pads (I set)
•Operating Instructions
•Speaker and TV Connections
guide
•Setup Disc (DVD)
•DIGITAL MEDIA PORT
adapter (TOM-iP20)
(I)
•Operating Instructions for
the DIGITAL MEDIA
PORT adapter (TDM-iP20)
•HDMI cable
(I)

BDV·E300
•Front speakers (2)
•Surround speakers (2)
•Center speaker (1)
•Subwoofer ( 1)
•AM loop antenna (aerial) (1)
•PM wire antenna (aerial) (1)
~
or
•Speaker cords (6, white/red!
blue/gray/greenlpurple)
IIIIII
•Video cord (1)
•Remote commander
(remote) (1)
° 10000 II~oDDDO 0
~ 0000 . gUD~
a 0000 oDDD 01
•R6 (size AA) batteries (2)
•Calibration mic
(1)
•Foot pads (1 set)
•Operating Instructions
•Speaker and TV Connections
guide
•Setup Disc (DVD)
•DIGITAL MEDIA PORT
adapter (TDM-iP20)
(1)
•Operating Instructions for
the DIGITAL MEDIA
PORT adapter (TDM-iP20)
gus

Inserting batteries into the remote
Insert two R6 (size AA) batteries (supplied) by matching the (£) and 8ends on the batteries to the
markings inside the compartment.
..
m:m
•Do not leave the remote in an extremely hot or humid place.
•Do not use anew battery with
an old one.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Attach the foot pads (supplied) to the bottom of the subwoofer to stabilize the subwoofer and prevent
it from slipping.
Remove the foot pads from
the protective cover.
10
US
.
~

Index to Parts and
Control
For more information, refer to the pages
indicated in parentheses.
(1) @@1-+I---13
0®®
Number 5, FAVORITES/AUDIO, CH +, and
~ buttons have atactile dot. Use the tactile dot
as areference when operating the remote.
• a.gJ: For system operations
•CI2:J: For TV operations
(For details, see "Controlling Your
TV with
the Supplied Remote" (page 69).)
[] THEATER (page 64) CI2:J
Switches to the optimum video mode for
watching movies automatically.
ONE-TOUCH PLAY (pages 36, 64)
a.gJ
By only pressing the button, the TV turns
on, the
TV is set for BDIDVD input
selector, and the system starts playing
adisc
automaticall y.
TV IJ~ (on/standby) (page 69) CI2:J
Turns on the TV or sets it to standby mode.
IJ~ (on/standby) (pages 28, 29, 36, 51)
a.gJ
Turns on the system or sets it to standby
mode.
[g] S-AIR MODE (page 58) [QQ]
Selects playback mode for the S-AIR
receiver.
NIGHT (page 50) [QQ]
Activates the night mode function.
DYNAMIC BASS (page 49) emu
Reinforces bass frequencies.
TV (page 69) CI2:J
Changes to the TV operation mode for the
remote.
~ Number buttons (pages 36, 52, 69)
a.gJ em
Enters the title/chapter numbers, radio
frequencies, etc.
CLEAR (pages 40, 53) emu
Clears the entry field.
TIME (page 41) a.gJ
Displays the elapsed/remaining playback
time in the front panel display.
•(page 69) em
Inputs "." (dot) when inputting numerics.
ENTER (page 69) em
Enters the selected item.
[1] AUDIO (pages 48, 49) emu
Selects the audio format/track.
SUBTITLE (page 38) [QQ]
Selects the subtitle language when multi-
lingual subtitles are recorded on aBD-
ROMIDVD VIDEO.
D.TUNING (page 53) [QQ]
Selects the radio frequencies.
11
US

12
US
ANGLE (page 38) []Q]
TOOLS (page 69) Cf2J
Switches to other viewing angles when Displays the operation menu for the current
multi-angles are recorded on aBD-ROMI display.
DVDVIDEO.
[f]
FUNCTION (pages 32, 36,44,45, 51,55)
SYSTEM MENU (pages 33, 42, 49, 53,
[]Q]
56,71) []Q]
Selects the playback source.
Enters the system menu. SOUND MODE (page 47)
[]QJ
FAVORITES (page 69) Cf2J Selects the sound mode.
Displays the favorite channel list.
lID
Playback operation buttons []Q]
CC (page 69) Cf2J See "Playback" (page 36).
Displays closed captioning (when
~ /~ (previous/next)
available).
..-/- .. REPLAY/ADVANCE
WIDE (page 69) Cf2J
.... /~ (fast reverselfast forward)
Changes the aspect ratio of the connected
TV.
~ (play)
[ID
Color buttons (RED/GREEN/BLUEt
II (pause)
YELLOW) (page 84)
[]QJ
•(stop)
Short cut keys for selecting items on some Radio operation buttons
[]QJ
BD's menus (can also be used for BD's
Java interactive operations). See "Tuner" (page 51).
[ID
TOP MENU (page 39) []Q]
PRESET +/-
Opens or closes the BD's or DVD's Top TUNING
+/-
Menu.
lID
MUTING (pages 36, 44, 69) []QJ
oDISPLAY (page 41) []QJ
Cf2J
Displays the playback information on the Turns off the sound temporarily.
TV screen. VOLUME
+/- (pages 36, 69) []QJ
POP UP/MENU (page 39) []QJ
Cf2J
Opens or closes the BD-ROM's Pop-up Adjusts the volume.
Menu, or the
DVD's menu.
CH +/- (page 69) Cf2J
OPTIONS (pages 36, 44, 45, 51) []QJ
Selects the channels up and down.
Displays the options menu on the TV TV INPUT (page 69) Cf2J
screen. Switches the
TV's input source between the
HOME (pages 29, 36, 44, 45, 51, 66, 74) TV and other input sources.
[]Q] Cf2J DISPLAY (page 51)
[]QJ
Enters or exits the system's home menu. Changes the radio information
in the front
RETURN (pages 69, 84) []QJ Cf2J panel display between radio frequency and
Returns to the previous display. station name.
+-/'t'/~I-+ []QJ Cf2J
[1Q]
SCENE SEARCH (page 40) []Q]
Moves the highlight to adisplayed item. Switches to Scene Search mode that lets
() (ENTER) []Q] Cf2J you move quickly between scenes within
Enters the selected item. the title currently being played back.
GUIDE (page 69) Cf2J
Displays the Digital Electronic Programme
Guide (EPG).

12
\IC!!::J I
l~~~
-
....... ,4"" .
== 1/
i
\/
_.
. ._.
_. __ ..
_. -
.. --
I
1-
_ ...
III I
n ~
876543
[I] 11(9 (on/standby) (page 36)
Turns on the unit, or sets to standby mode.
[ZJ Play operation buttons (page 36)
~ (play)
Starts or re-starts playback.
Plays aslideshow when adisc containing
IPEG image files
is inserted.
•(stop)
Stops playback and remembers the stop
point (resume point).
The resume point for atitle/track is the last
point you played
or the last photo for a
photo folder.
FUNCTION
Selects the playback source.
VOLUME +/-
Adjusts the system's volume.
~ (open/close)
Opens or closes the disc tray.
@] S-AIR indicator
Lights up when the S-AIR transceiver is
inserted in the unit and the system transmits
sound.
[1] VIRTUAL 7.1 CH indicator (page 33)
Lights up while virtual 7.1 ch decoding is
activated.
~ Power indicator
Lights up while the system is turned on.
[§] Front panel display
[l] Disc tray (page 36)
[ID m (remote sensor)
13
US

14
US
About the indications in the front panel display
9
BASS
-.
13 12
[II
Current surround format
[l]
Lights up when outputting 1920 x
[g]
Lights up when a station is received. 1080p/24 Hz
video signals.
(Radio
only) (page 51)
lID
Lights up when the night mode is on.
@]
Lights up when stereo sound is
(page 50)
received. (Radio
only) (page 51)
lID
Lights up when the DYNAMIC BASS
@]
Lights up when the external memory is
function is on. (page 49)
recognized. (page 26)
[jg]
Displays system's status such as
[§]
Lights up when the HDMI OUT jack is
chapter, title, or track number, time
correctly connected to an HDCP (High- information, radio frequency,
playing
bandwidth
Digital Content Protection)- status,
decoding mode, etc.
compliant device with HDMI or DVI
ITIJ
Lights up when the system is
(Digital Visual Interface) input. accessing the network.
[§]
Lights up when outputting 720p/1080i/
[1gJ
Displays system's playing status.
1080p
video signals from the HDMI [j]] Flashes
when the sleep timer is set.
OUT jack or 720pl1080i video signals
(page 71)
from the COMPONENT VIDEO OUT
jacks.

•100
Screws* 4
o
14
1
15
[I] LAN (100) terminal (page 27)
[gJ COMPONENT VIDEO OUT jacks (page
21)
~ VIDEO OUT jack (page 21)
@] EZW-T100 slot (page 56)
lID AM terminal (page 25)
lID COAXIAL 75Q FM jack (page 25)
[f) A.CAL MIC jack (pages 29, 66)
I]] AUDIO (AUDIO IN UR) jacks (page 23)
lID TV (AUDIO IN UR) jacks (page 22)
I1Q] EXT slot (page 26)
[j] TV (DIGITAL IN OPTICAL) jack (page
22)
ng] SAT/CABLE (DIGITAL IN COAXIAL)
jack (page 23)
~ DMPORT (DIGITAL MEDIA PORT) jack
(page 23)
[HJ HDMI OUT jack (page 21)
II§] SPEAKER jacks (page 20)
* LL CAUTION
Please do not remove the screws unless you
are installing the
EZW -T 100.
15
US

16
US
..... /Surround right speaker (R)
Surround left speaker
(L) ",
Getting Started
am
•Use caution when placing the speakers and/or speakerstands attached to the speakers onaspecially treated (waxed,
oiled, polished, etc.) floor,
as staining or discoloration may result.
•Do not lean
or hang on aspeaker, as it may fall down.
Forthe best possible surround sound, place all speakers at the same distance from the listening position
(0). The distance can be between 0to 23 feet (0.0 to 7.0 meters).
If you cannot place the center speaker and surround speakers at the same distance as (0), place them
within 23 feet (7.0 meters)
of the listening position.
Place the surround speakers to the rear
of the listening position (0).
The subwoofer can be placed anywhere in the room.
Subwoofer Center speaker
From le«speaker (L)~llSlr,.~rom r~ht speaker (AI
... ~ 0 / ...
/:/ 0 30
0300 0
..........
Step 1: Installing the System

To add the optional surround back speakers
You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP1,
optional). The optional product lineup differs depending on the area.
17
US
Surround right
speaker(R)
(9
'.. ~ Surround back right speaker (R)
(optional)
Center speaker
Subwoofer
1E I3l- .
Front left speaker (L) Front right speaker (R)
~
, .... ,",:: ~.1~:.""
"".'" '.0:"'.
..".
..
..
..
..
. .
..
. .
.,
..
. .
Surround left 1tJ!4----------1~btlI-------
speaker (L)
(9
Surround back left speaker (L)
(optional)
For the position of the surround back speakers, refer the illustration below «9).

Hole on the back of
the speaker
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
G\\\\\\\\\\\\\\1> ~ 4mm (5/
32
inch)
~ .1
30 mm (1 3/
16 inches)
18
US
To install the speakers on a wall
Before installing the speakers on awall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to
~, and the speaker cord without the color tube to 8.
Caution
•Contact ascrew shop or installer regarding the wall material or screws to be used.
•Use screws that are suitable for the wall material and strength. As aplaster board wall is especially fragile, attach
the screws securely to abeam and fasten them to the wall. Install the speakers on avertical and flat wall where
reinforcement is applied.
•Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
1Prepare screws (not supplied) that are suitable for the holeon the back of each speaker.
See the illustrations below.

19
U5
219mm
(8 5ta inches)
For the center speaker
For the other speakers
BDY·E300
Hole on the back of
the speaker
160
mm
(6% inches)
\
Rear of the speaker
For the center speaker
For the other speakers
BDY.T10/BDY-T11
3Hang the speakers on the screws.
2Fasten the screws to the wall.

Blue
(Surround left speaker (L»
Gray
'---- (Surround right speaker (R»
Rear of the speaker
To connect speaker cords to the speaker
Green
(Center speaker)
Connector
~))::::::l ~
20
U5
To connect speaker cords to the unit
When connecting to the unit, insert the connector until it clicks.
Rear panel of the unit
Red White
(Front right speaker
(R» (Front left speaker (L»
Theconnector of the speakercords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color
of the SPEAKERjacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to
~, and the speaker cord without the color tube to 8. Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead)
of the unit to awall outlet (mains) until all the other
connections are made.
Step 2: Connecting the System
-
•When you connect another component with avolume control, tum down the volume of the other components to a
level where sound is not distorted.