Sony SU-ES29G User manual

TV Stand
SU-ES29G/ES34G
Instructions
This TV stand is designed to hold the Sony
KV-ES29/ES34 color TV on top, and a VCR or other equipment
inside.
Instructions
This TV stand is designed to hold the Sony
KV-ES29/ES34 color TV on top, and a VCR or other equipment
inside.
Instructions
This TV stand is designed to hold the Sony
KV-ES29/ES34 color TV on top, and a VCR or other equipment
inside.
Design and specifications are subject to
change without notice.
4-074-675-13 (1)
580
Preventing the TV from tipping
Preventing the TV from tipping
Preventing the TV from tipping
Use the hold band to prevent the TV from tipping or
falling off the TV stand.
Use the hold band to prevent the TV from tipping or
falling off the TV stand.
Use the hold band to prevent the TV from tipping or
falling off the TV stand.
Specifications Spec Spec
SU-ES34G
Dimensions Unit: mm
Weight: 22.9 kg Dimensions Unit: mm
Weight: 22.9 kg Dimensions Unit: mm Weight: 22.9 kg
440
SU-ES29G
Dimensions Unit: mm
Weight: 16.5 kg Dimensions Unit: mm
Weight: 16.5 kg Dimensions Unit: mm Weight: 16.5 kg
Do not place any equipment which exceeds the maximum weight for
each divider as indicated in the illustration. Otherwise, the divider
may break.
Do not place any equipment which exceeds the maximum weight for
each devider as indicated in the illustration. Otherwise, the devider
may break.
Do not place any equipment which exceeds the maximum weight for
each devider as indicated in the illustration. Otherwise, the devider
may break.
20 kg
84 kg (SU-ES34G)
56 kg (SU-ES29G)
Notes
• Place the TV in the correct position.
• Do not put the TV legs on the stoppers.
• Do not put the TV power cord between the top board and the TV legs. If you
do so, the cord may be damaged and it may cause an electric shock or fire.
Notes
• Place the TV in the correct position.
• Do not put the TV legs on the stoppers.
• Do not put the TV power cord between the top board and the TV legs. If you
do so, the cord may be damaged and it may cause an electric shock or fire.
Notes
• Place the TV in the correct position.
• Do not put the TV legs on the stoppers.
• Do not put the TV power cord between the top board and the TV legs. If you
do so, the cord may be damaged and it may cause an electric shock or fire.
Installing the TV Installing the TV
Installing the TV
Sony Corporation 1999 Printed in Japan
• Do not place the stand in a location
near a heat source, such as a radiator,
or in a place subject to direct sunlight.
• Clean the stand periodically with a soft
cloth. If fingerprints, food and
beverage stains, etc., are difficult to
remove, use a cloth moistened with a
mild detergent solution. Do not use
scouring powder, an abrasive pad, or a
solvent.
Notes on use Notes on use Notes on
• Do not place the stand in a location
near a heat source, such as a radiator,
or in a place subject to direct sunlight.
• Clean the stand periodically with a soft
cloth. If fingerprints, food and
beverage stains, etc., are difficult to
remove, use a cloth moistened with a
mild detergent solution. Do not use
scouring powder, an abrasive pad, or a
solvent.
• Do not place the stand in a location
near a heat source, such as a radiator,
or in a place subject to direct sunlight.
• Clean the stand periodically with a soft
cloth. If fingerprints, food and
beverage stains, etc., are difficult to
remove, use a cloth moistened with a
mild detergent solution. Do not use
scouring powder, an abrasive pad, or a
solvent.
Note on carrying capacity
Note on carrying capacity
Note on carrying capacity
549
859
755 427
548
136
165
494
440
461
722
617 368
490
Design and specifications are subject to
change without notice. Design and specifications are subject to change without notice.
20 kg
435
435
136
165

Parts list Parts list Parts list
Parts name
Parts name
Parts name
Stays A
Stays A
Stays A
Stay B (front stay)
Stay B (front stay)
Stay B (front stay)
Stay C (rear stay)
Stay C (rear stay)
Stay C (rear stay)
Screws
Screws
Screws
×4
×1
×1
×8
Symbol
Symbol
Symbol
A
B
C
D
Parts name
Parts name
Parts name
Top board
Top board
Top board
Screws (large)
Screws (large)
Screws (large)
Screws (small)
Screws (small)
Screws (small)
Dividers
Dividers
Dividers
×1
×2
×8
×2
Symbol
Symbol
Symbol
E
F
G
H
Attach the stays A (A) to the stay B (B) and the stay C (C).
Attach the stays A (A) to the stay B (B) and the stay C (C).
Attach the stays A (A) to the stay B (B) and the stay C (C).
Attach the Top board (E).
Attach the Top board (E).
Attach the Top board (E).
Attach the Dividers (H).
Attach the Dividers (H).
Attach the Dividers (H).
1
23
Assembling the TV stand Assembling the TV stand Assembling the TV stand
B
F
E
C
Note
Place the dividers properly into the
grooves, otherwise they will bend.
Note
Place the dividers properly into the
grooves, otherwise they will bend.
Note
Place the dividers properly into the
grooves, otherwise they will bend. H
Arrow direction shows front.
Arrow direction shows front.
Arrow direction shows front.
AD
G
1Attach the lower stays A (A) as shown below, and screw
the screws (D) in loosely.
1Attach the lower stays A (A) as shown below, and screw
the screws (D) in loosely.
1Attach the lower stays A (A) as shown below, and screw
the screws (D) in loosely.
2Attach the upper stays A, and screw the screws (D) in
loosely.
2Attach the upper stays A, and screw the screws (D) in
loosely.
2Attach the upper stays A, and screw the screws (D) in
loosely.
3Tighten all the screws (D).
3Tighten all the screws (D).
3Tighten all the screws (D).
F
D
A