Sony SRS-XB10 User manual

SRS-XB10 [UC7] (US, CaFR, LaES) 4-692-892-12(1)
©2017 Sony Corporation Printed in China
SRS-XB10
Wireless Speaker
Operating Instructions
Mode d’emploi
Manual de instrucciones
4-692-892-12(1) Charging the unit
Charge the battery for the first time.
BLUETOOTH connection
1Set the unit to the pairing mode. 2Pairing the unit to your smartphone/iPhone.
BLUETOOTH
SRS-XB10
BLUETOOTH
ON
Listening with two units (Speaker Add function - double mode/stereo mode)
1Preparation for two SRS-XB10 units. 2Set unit and then .3Connect your smartphone/iPhone to unit /with the indicator lit.
BLUETOOTH
XXX-XXXX
Press to turn on.
Press and hold until you hear
beeps (about 3 seconds).
* Step is unnecessary when using the unit for the first time.
NFC ON
To connect by One-touch (NFC)
Listening
Start playback.
Adjust the volume.
To switch double mode/stereo mode (Lch/Rch)
Press (/).
AUnit A
BUnit B
B
LUETOOTH
XXX-XXXX
A
* The default is double mode.
B
Press to turn on.
Press and hold until you
hear beeps (about 3 seconds).
Press to turn on.
Press and hold until you
hear beeps (about 3 seconds).
Help Guide
(web document for a PC/smartphone)
http://rd1.sony.net/help/speaker/srs-xb10/h_zz/
Close the cap firmly.
The cap plays a very important role in maintenance of the water
resistant performance.
* Check that the mark is on
the upper side of the cap.
*

SRS-XB10 [UC7] (US, CaFR, LaES) 4-692-892-12(1)
SRS-XB10
Wireless Speaker
Operating Instructions
Mode d’emploi
Manual de instrucciones
Charge de l’appareil
Cargar la unidad
Chargez la batterie pour la première fois.
Cargar la batería por primera vez.
Connexion BLUETOOTH
Conexión BLUETOOTH
1Réglez l’appareil en mode de jumelage.
Configure la unidad en modo emparejamiento.
2Jumelez l’appareil avec votre téléphone intelligent/iPhone.
Emparejar la unidad con su smartphone/iPhone.
BLUETOOTH
SRS-XB10
BLUETOOTH
ON
Écoute à l’aide de deux appareils (Fonction d’ajout de haut-parleur– mode double/mode stéréo)
Reproducir en dos unidades (Función para agregar altavoces - modo doble/modo estéreo)
1Préparez deux appareils SRS-XB10.
Preparación para dos unidades SRS-XB10.
2Réglez l’appareil , puis l’appareil .
Configure la unidad y luego la .
3Connectez votre téléphone intelligent/iPhone à l’appareil /dont le témoin est allumé.
Conecte su smartphone/iPhone a la unidad /con el indicador encendido.
BLUETOOTH
XXX-XXXX
Appuyez sur pour le mettre en
marche.
Presione para encenderlo.
Appuyez sur la touche et maintenez-
la enfoncée jusqu’à ce que vous entendiez
des signaux sonores (environ 3 secondes).
Mantenga pulsado el botón hasta que
empiecen a escucharse pitidos
(aproximadamente 3 segundos).
NFC ON
Pour établir la connexion par simple contact (NFC)
Para conectar por medio de un toque (NFC)
Écoute
Reproducir
Démarrez la lecture.
Comenzar la reproducción.
Pour alterner entre mode double/mode stéréo (canalG/canalD)
Para conmutar entre modo doble/modo estéreo (Canal Izq./Canal Der.)
Appuyez sur (/).
Presione (/).
AAppareil A/Unidad A
BAppareil B/Unidad B
B
LUETOOTH
XXX-XXXX
A
* Le mode double est le mode par défaut.
* El modo predeterminado es el modo doble.
B
Appuyez sur pour le
mettre en marche.
Presione para encenderlo.
Appuyez sur pour le
mettre en marche.
Presione para encenderlo.
http://rd1.sony.net/help/speaker/srs-xb10/h_zz/
Manuel d’aide
(document Web pour PC/téléphone
intelligent)
Guía de ayuda
(documento web para una PC o smartphone) Fermez le capuchon fermement.
Le capuchon joue un rôle très important pour le maintien des performances
de résistance à l’eau.
Cierre firmemente la tapa.
La cubierta cumple un papel muy importante en el rendimiento de la
impermeabilidad.
* Vérifiez que le repère est sur
le côté supérieur du capuchon.
* Verifique que la marca esté
en el lado superior de la tapa.
*
* L’étapen’est pas requise lorsque vous utilisez l’appareil
pour la première fois.
* El paso no es necesario cuando se utiliza la unidad por
primera vez.
Appuyez sur la touche et
maintenez-la enfoncée jusqu’à ce
que vous entendiez des signaux
sonores (environ 3 secondes).
Mantenga pulsado el botón
hasta que empiecen a escucharse
pitidos (aproximadamente 3
segundos).
Appuyez sur la touche et
maintenez-la enfoncée jusqu’à ce
que vous entendiez des signaux
sonores (environ 3 secondes).
Mantenga pulsado el botón
hasta que empiecen a escucharse
pitidos (aproximadamente 3
segundos).
Réglez le volume.
Ajustar el volumen.

What you can do with the speaker
One-touch connection (NFC)
BLUETOOTH®Ver. 4.2
Compatible BLUETOOTH profiles*1: A2DP, AVRCP, HFP, HSP
By connecting the speaker with a smartphone via BLUETOOTH, you can talk hands-free using the
built-in microphone and speaker.
“Noise suppression” and “Echo cancellation” enable phone calls with high-quality sound.
Noise suppression: Noise picked up by the speaker is suppressed, so the caller will hear your
voice with less noise.
Echo cancellation: By reducing sound from the speaker picked up by the speaker microphone,
echoes generated by the caller’s phone will be suppressed.
You can enjoy up to about 16 hours*2*3 of continuous wireless music playback with the built-in
lithium ion rechargeable battery.
By using the AUDIO IN jack (external input jack), you can enjoy music of portable audio devices,
etc.
By connecting two SRS-XB10 speakers via BLUETOOTH, you can play audio in either stereo mode
(stereo sound) or double mode.
The speaker has a water resistant specification*4*5 of IPX5*6 as specified in “Degrees of
protection against ingress of water” of the IEC60529 “Ingress Protection Rating (IP Code).”
*1BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication
between devices.
*2The battery life may vary depending on the ambient temperature or conditions of use. The
method of estimating the battery life has been changed since 2015.
*3When using a specified music source, sending music at the maximum volume level from a
BLUETOOTH device, and setting the volume level of the speaker to 10. If the volume level of
the speaker is set to maximum, the usage life will be approx. 5 hours.
*4Requires that the cap is fastened securely.
*5The supplied accessories are not water resistant.
*6IPX5 (Degree of protection against jets of water): The system has been tested and found to
remain functional after exposure to direct jet streams of water using a nozzle of 6.3 mm (about
1/4 in) internal diameter from any direction where approximately 12.5 L/ min of water is applied
for a period of more than 3 minutes from a distance of about 3 meters (about 10 ft).

Parts and controls

1. (power) PAIRING button
2. –/+ (volume) buttons
3. ADD button
4. (play) button
5. N-mark
6. (BLUETOOTH) indicator
7. L (left)/R (right) indicators
8. MIC (microphone)
9. CHG (charge) indicator
10. DC IN 5V jack
11. RESET button
12. AUDIO IN jack
13. Cap
14. Strap
About the indicators
CHG (charge) indicator (orange)
Turns off
Charging the speaker is completed.
Lights up
The speaker is being charged.
Flashes slowly
The built-in battery is running low and needs to be charged.
Note
A speaker that is in use can be charged if it is connected to a booted computer or AC outlet via a
USB AC adapter (not supplied). In this case, it may take longer to charge the battery depending
on the conditions of use. Therefore, it is recommended to turn off the speaker when charging.
When you use the speaker at a loud volume for a long time, the battery may run low even if the
speaker is connected to a booted computer or AC outlet via a USB AC adapter. As a result, sound
becomes low. This is not a malfunction. Turn off the speaker and charge the battery sufficiently.
If charging takes a long time, it makes charging of the speaker stop. In these conditions, the CHG
(charge) indicator keeps flashing in orange quickly, but this is not a malfunction. To resolve
these issues, disconnect the USB cable from the speaker and connect it again within the
operating temperature between 5 °C and 35 °C (41 °F and 95 °F).
(BLUETOOTH) indicator
Lights up
The speaker is connected to a BLUETOOTH device.

Flashes quickly (3
times a second)
The speaker enters the pairing mode.
Flashes slowly
The speaker is searching for a BLUETOOTH device to connect to.
Flashes once
Each time you press the –/+ (volume) button, the indicator flashes once.
Flashes 3 times
When you operate the -/+ (volume) button and the volume is set at the lowest
or highest level, the indicator flashes 3 times.
L/R indicators
Lights
up
The speaker is operating as the left speaker while the stereo mode of the Speaker Add
function is enabled.
The speaker is operating as a monaural speaker while the double mode of the Speaker Add
function is enabled.
Charging the speaker
The speaker contains a rechargeable lithium ion battery which should be charged more than 1
hour before using the speaker for the first time.
1. Make sure that the speaker is turned off.
2. Connect the speaker to a booted computer or AC outlet to charge.
oWhen charging from a booted computer
Connect the micro-USB cable (supplied) to the speaker, then connect the other end to a
booted computer.
oWhen charging from an AC outlet
Connect the micro-USB cable (supplied) to the speaker, connect the other end to a USB
AC adaptor (not supplied), then plug the USB AC adaptor to an AC outlet.

3. The CHG (charge) indicator lights up in orange while charging. When connecting the
speaker to a USB device which has the ability to output in 500 mA, the charging time is
about 4 hours and 30 minutes*1. The time may vary depending on the ambient
temperature or conditions of use.
4. The CHG (charge) indicator will turn off when charging has ended.
5. If the CHG (charge) indicator stays turned off when the speaker power is off and
connected to a USB device, the built-in lithium ion battery is fully charged. Once the
battery is fully charged, it will not be charged further even if the speaker is kept
connected to a USB device.
6. *1Time that is required to charge the empty battery to its full capacity when the speaker
turns off.
Battery life (when using the BLUETOOTH connection)
About 16 hours*2.
The time stated above may vary depending on the ambient temperature or conditions of use.
*2 When the specified music source is used, the BLUETOOTH device is set to the maximum
volume, and the volume level of the speaker is set to 10. The battery life when the volume level
of the speaker is set to maximum will be 5 hours.
When the battery is running low
When the CHG (charge) indicator flashes slowly in orange, the battery is running low and needs
to be charged.
Recommended system environment of computer for USB charging
Windows® 10, Windows® 8.1, Windows® 8, Windows® 7 SP1, Mac OS X (version 10.6 -
10.12)
Operation in all computers with the above environment is not guaranteed.
Operation in a home-built computer is not covered by the warranty.

Hint
A speaker that is in use can be charged if it is connected to a booted computer or AC outlet via a
USB AC adaptor (not supplied). In this case, it may take longer to charge the battery than
compared to the speaker is turned off depending on the conditions of use. Therefore, it is
recommended to turn off the speaker when charging.
Note
When you use the speaker at a loud volume, the battery may run low even if the speaker is
connected to a booted computer. If you want to use the speaker while charging, lower the
volume of the speaker. Otherwise, turn off the speaker and charge the battery sufficiently.
When you use the speaker at a loud volume for a long time, the battery may run low even if the
speaker is connected to a booted computer. As a result, sound becomes low. This is not a
malfunction. Turn off the speaker and charge the battery sufficiently.
When you switch the power source between a booted computer/AC outlet and battery by
connecting/disconnecting the USB cable, the speaker may stop sound output for a short while.
This is not a malfunction.
When using the speaker for the first time, be sure to charge the battery for more than 1 hour
before turning on the power.
In an extremely cold or hot environment, charging stops for safety. If charging takes a long time,
it also makes charging of the speaker stop. In these conditions, the CHG (charge) indicator keeps
flashing in orange quickly, but this is not a malfunction. To resolve these issues, disconnect the
micro-USB cable and connect it again within the operating temperature between 5 °C and 35 °C
(41 °F and 95 °F).
Do not charge in places where water may splash.
Even if you do not intend to use the speaker for a long time, charge the battery sufficiently once
every 6 months to maintain its performance.

Turning the power on
1. Press the (power) PAIRING button.
The (BLUETOOTH) indicator flashes slowly in white.
When you turn on the speaker for the first time after purchase or there is no pairing
information stored in the speaker, the (BLUETOOTH) indicator will begin to flash
quickly in white.
Note
When the CHG (charge) indicator flashes slowly in orange, the battery is running low and needs
to be charged.
Turning the power off
1. Press the (power) PAIRING button.
The (BLUETOOTH) indicator turns off.

Auto power off function
If the speaker is not connected to a BLUETOOTH device via BLUETOOTH and an audio cable
is not connected to the speaker's AUDIO IN jack for 15 minutes, the speaker turns off
automatically.
Note
When the speaker is connected to a BLUETOOTH device via BLUETOOTH or an audio cable is
connected to the speaker’s AUDIO IN jack, the auto power off function is disabled.
How to make a wireless connection with BLUETOOTH
devices
You can enjoy music and hands-free calling with the speaker wirelessly by using your device’s
BLUETOOTH function.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Connect the speaker to a booted computer or AC outlet via a USB AC adaptor (not supplied),
otherwise charge the battery sufficiently.
Stop playback on a BLUETOOTH device.
Turn down the volume of the BLUETOOTH device and speaker to avoid any sudden loud sound
output from the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Pairing the speaker with a BLUETOOTH device
Pairing is the process required to mutually register the information on BLUETOOTH devices to
be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection
for the first time.
Select your situation from the following two connecting patterns. The method is the same, even
when pairing a second device or more.
Pairing and connecting with a BLUETOOTH device
Connecting with an NFC-compatible device by One-touch (NFC)
Connecting the speaker with the paired device
Once the BLUETOOTH devices are paired, there is no need to pair them again. To connect a
device already paired, refer to the following topic.

Connecting with a paired BLUETOOTH device
Connecting the speaker with an NFC-compatible device by One-touch (NFC)
By touching the speaker with an NFC-compatible device such as a smartphone or Walkman,etc.,
the speaker is turned on automatically and then proceeds to pairing and making a BLUETOOTH
connection. For details, refer to the following topics.
Connecting with an NFC-compatible device by One-touch (NFC)
Disconnecting the NFC-compatible device by One-touch (NFC)
Switching devices by One-touch (NFC)
Compatible smartphones
NFC-compatible smartphones with Android™ 4.1 or later installed
Compatible Walkman models
NFC-compatible Walkman models*
*Even if your Walkman is compatible with the NFC function, it may not be able to make a
BLUETOOTH connection with the speaker by one touch. For details on the compatible models,
refer to the operating instructions supplied with the Walkman.
NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication
between various devices, such as smartphones and IC tags.
Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be
achieved easily by simply touching NFC-compatible devices together (i.e., at the N-mark symbol
or location designated on each device).
Note
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the
following cases:
oPairing information has been deleted after repair, etc.
oThe speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices
have already been paired, the paired device with the oldest connection time is replaced
by the new one.
oThe pairing information of the speaker has been deleted from the BLUETOOTH device.
oThe speaker is initialized.
All pairing information will be deleted.
The speaker can be paired with multiple devices, but can only play music from one paired device
at a time.
Pairing and connecting with a BLUETOOTH device

The speaker can be paired with up to 8 BLUETOOTH devices.
When pairing with two or more BLUETOOTH devices, perform the following pairing procedure
for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Connect the speaker to a booted computer or AC outlet via a USB AC adaptor (not supplied),
otherwise charge the battery sufficiently.
Stop playback on a BLUETOOTH device.
Turn down the volume of the BLUETOOTH device and speaker to avoid any sudden loud sound
output from the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
1. Turn on the speaker.
The (BLUETOOTH) indicator begins to flash in white.
oWhen you turn on the speaker for the first time after purchase, the (BLUETOOTH)
indicator will begin to flash quickly in white and the speaker enters pairing mode
automatically by just turning on the speaker. Proceed to step .
oWhen you turn on the speaker, the speaker tries to make a BLUETOOTH connection with
the last connected BLUETOOTH device. If the device is nearby and its BLUETOOTH
function is on, the BLUETOOTH connection is established automatically and the
(BLUETOOTH) indicator stays lit. When you want to connect another BLUETOOTH
device, terminate the current BLUETOOTH connection by operating the currently
connected BLUETOOTH device.
2. Press and hold the (power) PAIRING button until you hear beeps and the
(BLUETOOTH) indicator begins to flash quickly in white.
The speaker enters pairing mode.

3. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
When a list of detected devices appears on the display of the BLUETOOTH device,
select “SRS-XB10.”
If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”
*A passkey may be called “Passcode,” “PIN code,” “PIN number” or “Password.”
4. Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the (BLUETOOTH) indicator
stays lit.
If the BLUETOOTH connection is not established, repeat from step .
Hint
For details on operating a BLUETOOTH device, refer to the operating instructions supplied with
the BLUETOOTH device.
Connecting with a paired BLUETOOTH device
Check the following before you operate the speaker.

If the speaker was previously paired with a different device, turn off the BLUETOOTH function
for the other device.
1. Turn on the speaker.
The (BLUETOOTH) indicator begins to flash in white.
When you turn on the speaker, the speaker tries to make a BLUETOOTH connection
with the last connected BLUETOOTH device. If the device is nearby and its
BLUETOOTH function is on, the BLUETOOTH connection is established automatically
and the (BLUETOOTH) indicator stays lit. When you want to connect another
BLUETOOTH device, terminate the current BLUETOOTH connection by operating the
currently connected BLUETOOTH device.
2. Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the (BLUETOOTH) indicator
stays lit.
Hint
If the devices cannot connect, enter pairing mode to connect.
(The speaker can be paired with up to 8 devices. If the speaker is paired with multiple devices, it
is necessary to enter pairing mode to connect.)

Note
When the speaker made a connection automatically with the last connected BLUETOOTH
device, the BLUETOOTH function may not work properly. In this case, terminate the BLUETOOTH
connection by operating the connected BLUETOOTH device and reestablish a connection.
Connecting with an NFC-compatible device by One-touch
(NFC)
By touching the speaker with an NFC-compatible device such as a smartphone, the speaker turns
on automatically, then proceeds to pairing and BLUETOOTH connection.
Compatible smartphones
NFC-compatible smartphones with Android 4.1 or later installed
Compatible Walkman models
NFC-compatible Walkman models*1
*1 Even if your Walkman is compatible with the NFC function, it may not be able to make a
BLUETOOTH connection with the speaker by One-touch. For details on the compatible models,
refer to the operating instructions supplied with the Walkman.
NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication
between various devices, such as smartphones and IC tags.
Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be
achieved easily by simply touching NFC-compatible devices together (i.e., at the N-mark symbol
or location designated on each device).
Do the following before starting.
Turn down the volume of the device.
Stop playback on the BLUETOOTH device to avoid sudden loud sound output from the speaker.
1. Set the NFC function of the device to on.
2. Touch the speaker with the device.
Unlock the screen of the device beforehand.
Keep touching the device on the N marked part of the speaker until the device responds
(it may take a few seconds).

If the speaker is off, it will turn on when the device touches it.
Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established, (BLUETOOTH) indicator stays
lit.
To disconnect, touch the speaker with the device again.
Hint
Even if the speaker is not turned on, the (BLUETOOTH) indicator flashes when touching with
a device. When the connection is established, the (BLUETOOTH) indicator lights up in white.
If you cannot connect the speaker, try the following.
oMove the device over the N-mark part of the speaker slowly.
oIf the device is in a case, remove the case.
If you touch a device on the speaker, the device terminates the BLUETOOTH connection with the
current device (NFC-compatible headset, etc.), and connects with the speaker (One-touch
connection switching).
Note
If your device is a type that goes into standby mode in response to magnetic force, it may not be
able to be connected by NFC.

Disconnecting the NFC-compatible device by One-touch
(NFC)
You can disconnect the speaker from the connected NFC-compatible device such as a
smartphone or Walkman, etc. by touching the speaker with it.
1. Touch the device on the N marked part of the speaker.
Hint
After the speaker is disconnected from the device by One-touch, if no operation is performed
and no sound is input for 15 minutes, the speaker turns off automatically by the auto power off
function.
If you cannot disconnect the speaker, try the following.
oMove the device slowly over the N marked part of the speaker.
oIf the device is in a case, remove the case.
Switching devices by One-touch (NFC)
If you move an NFC-compatible device over the N marked part of the speaker while the speaker
has been connected with the other BLUETOOTH device, the speaker disconnects from the
BLUETOOTH device, then connects with the NFC-compatible device that was just touched.
However, if you are talking on a BLUETOOTH mobile phone connected to the speaker, you
cannot switch the BLUETOOTH connection by One-touch.
When you touch an NFC-compatible device that has been connected with the speaker via the
BLUETOOTH connection on another NFC-compatible BLUETOOTH headset or BLUETOOTH
speaker, the NFC-compatible device disconnects from the speaker and connects with the
BLUETOOTH device it just touched.
If you cannot switch devices, try the following.
oMove the NFC-compatible device slowly over the N marked part of the speaker.
oIf the NFC-compatible device is in a case, remove the case.
Pairing and connecting with a computer (Windows 10)

Pairing is the process required to mutually register the information on BLUETOOTH devices to
be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection
for the first time. Perform same procedures to pair to other devices.
Do the following before starting.
Make sure that your computer has the BLUETOOTH wireless function.
Place your computer within 1 m (3 ft) of the speaker.
Connect the speaker to a booted computer or AC outlet via a USB AC adaptor (not supplied),
otherwise charge the battery sufficiently.
Locate the operating instructions supplied with the computer for reference.
Stop playback on the computer.
Turn down the volume of the computer and speaker to avoid any sudden loud sound output
from the speaker.
Depending on your computer, you need to turn on the built-in BLUETOOTH adaptor. If you do
not know how to turn on the BLUETOOTH adaptor or if you are unsure whether your computer
has the built-in BLUETOOTH adaptor, refer to the operating instructions of the computer.
Set the speaker setting on the computer to on. If the mute (off) mode is set in the speaker’s
setting on the computer, the speaker will not output sound.
oIf the speaker setting on the computer is in mute (off) mode
oIf the speaker setting on the computer is in on mode
1. Prepare to search for the speaker on the computer.
Select [ (Action Center)] –[Bluetooth] in the taskbar on the right-bottom of the
screen.

2. Turn on the speaker.
The (BLUETOOTH) indicator flashes in white.
oWhen you turn on the speaker for the first time after purchase, the (BLUETOOTH)
indicator will begin to flash quickly in white and the speaker enters pairing mode
automatically by just turning on the speaker. Proceed to step .
oWhen you turn on the speaker, the speaker tries to make a BLUETOOTH connection with
the last connected BLUETOOTH device. If the device is nearby and its BLUETOOTH
function is on, the BLUETOOTH connection is established automatically and the
(BLUETOOTH) indicator stays lit. When you want to connect another BLUETOOTH
device, terminate the current BLUETOOTH connection by operating the currently
connected BLUETOOTH device.
3. Press and hold the (power) PAIRING button until you hear beeps and the
(BLUETOOTH) indicator begins to flash quickly in white.
The speaker enters pairing mode.

4. Search for the speaker on the computer.
1. Select [Connect] in the Action Center on the right-bottom of the screen.
2. Select [SRS-XB10].
If [SRS-XB10] does not appear on the screen, repeat the procedure from step
.
After pairing, the BLUETOOTH connection establishes automatically and
[Connected music] will be displayed on the screen.