Sony SRS-XB402M User manual

SRS-XB402M & SRS-XB402G operation manual
By tonly

1
目录
1. Input key.................................................................................................................................................2
1.1 Single key..................................................................................................................................... 2
1.1.1 Multi Function Key operation for XBH3........................................................................... 3
1.2 Double Key...................................................................................................................................3
2. Boot up................................................................................................................................................... 4
2.1 insert adapter....................................................................................................................... 4
2.2 insert USB............................................................................................................................... 4
2.3 press the power key............................................................................................................. 5
3. configure network..................................................................................................................................6
4. login to amazon....................................................................................................................................10
5. use USB to upgrade software...............................................................................................................15

2
1. Input key
1.1 Single key
key name
Function
Power/
Bluetooth Pairing
Short press : Turns the system on/off
Long press : BT pairing
Volume-
Adjusts the volume.
Volume+
Adjusts the volume.
MIC
Short press: MIC Muting ON/OFF
Long press(7sec): Restart (Hardware Reset)
Multi Function
See below
Light/Battery
Short press: Lighting Pattern Change (include Light off)
Long press: Voice guidance
LIVE
Short press: LIVE SOUND on/off (LIVE SOUND <=> EXTRA BASS)
Long press: STANDARD on/off (STANDARD <=> EXTRA BASS)

3
1.1.1 Multi Function Key operation for XBH3
Function
Set Operation
Status/Condition
Operation(press)
1
Play, Pause,
Play
Pause
Short
2
AMS
Pause
Play
Short
3
AMS+
Play/Pause
Short x 2
4
AMS-
Play/Pause
Short x 3
5
Hot Word
Voice Control
Long(2sec)
6
Alarm/Timer
Alarm/Timer Ringing
Stop
During
Alarm/Timer
Ringing
Short
1.2 Double Key
Key Name
Operation
[Volume‐]
+
[Power/Bluetooth Pairing]
Factory Data Reset（初期化）
[Volume+]
+
[Power/Bluetooth Pairing]
BT Codec Change(SBC⇔AAC)
[LIVE]
+
[Light/Battery]
WiFi 5G ON/OFF

4
2. Boot up
Take out the machine form box, there are three ways to turn it on,
2.1 insert adapter
2.2 insert USB

5
2.3 press the power key
When the line light is on, the boot is successful.

6
3. configure network
a) Turn on your phone’s wifi and bluetooth.
b) Open the music center app

7
c) Select the device
d) Confirm the WiFi connection, click ok to connect, and then wait about
2 minutes

8

9
e) Rename your device name, click OK, wait a few seconds,
f) Set complete, click DONE

10
4. login to amazon
a) Select your device

11
b) click Settings
c) Click Amazon Alexa
d) Click Initial Setup

12
e) Click NEXTT

13
f) Choose language , and click NEXT
g) click NEXT to Connect your Amazon account

14
h) Enter your account number and password, click allow, and wait 10
seconds
i) Login successfully, click YES,WORK WELL, click DONE ,Network
configuration successful

15
5. use USB to upgrade software
a) Prepare a USB flash disk and an OTG transmission line.
b) Copy XB402M_A.UPG files into the USB flash drives.
c) Use OTG transmission line to link the machine to USB flash disk.

16
d) Press the power key to boot up.
e) After the boot is completed, press the live key,one of the top
indicatie lights will start flashing and the upgrade will start.
f) Wait a few minutes, the second lights in turn flashing blue, and then
the machine automatically restart.

17
g) Then the third and fourth lights flashed blue. the machine restarts
automatically and the upgrade is successful