Sony BRAVIA XR-75Z9J Operation instructions

Dismantling Information forUse
by ProfessionalRecyclers
9-888-798-42
LCD TV
Sony EMCS (M) Sdn. Bhd., HES-M
© 2021.05
ORIGINAL MANUAL ISSUE DATE: 2021.05
Conditions of Use:
(1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this information
for any purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part
without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-
date before using it.
Model:
XR-75Z9J
XR-85Z9J

MODEL LISTS
Remote
Model Remote Destination
XR-75Z9J RMF-TX621E CEI, CEP, UKA
XR-85Z9J RMF-TX621E CEI, CEP, UKA

1 LIST OF ITEMS TO BRING
1. Screwdriver (e.g. #2 Phillips Screwdriver)
2. Multimeter
3. ESD Wrist Straps
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
6. Service Manual (Unique) (for remove & replace details)
2 OPTIONAL EQUIPMENT
1. Screwdriver (e.g. #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
2. Flashlight
3. Service Manual (Common) (for t/shooting information)
For Surface Mounted Parts/Connectors:
Hot-Air Type soldering Iron is needed.
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
Plastic or Metal Ruler
(In case of Metal ruler, wrap in tape
(L=50mm) for prevent scratches)
TOOLS & EQUIPMENT
3

DISSASSEMBLY AND REMOVAL CAUTION 75”
4

DISSASSEMBLY AND REMOVAL CAUTION 75”
5

6
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
1-4 EXPLODED VIEW
AND PART LIST
12
3
4
5
6
REF.
NO PART NO. DESCRIPTION
15-024-599-21 TML COVER H (AQR)
25-024-601-21 AC COVER (AQR)
35-024-453-21 STAND COVER R A (AQR)
45-024-452-21 STAND COVER L A (AQR)
55-024-600-21 TML COVER S (AQR)
65-024-598-21 TML COVER V (AQR)
EXPLODED VIEW 75”

7
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
1-4 EXPLODED VIEW
AND PART LIST
1
3
5
14
17
8
6
7
23
19
4
15
12
18
27
4
22
13
19
31
16
2
20
28
10
11
21
25
26
32
29
30 2-650-770-31 SLIDE, CLAMP
4-745-336-01 SLIDE, CLAMP(MINI)
Stand
35 36
24
33
34
9
EXPLODED VIEW 75”

8
CONNECTOR
REF.
NO PART NO. DESCRIPTION REMARKS
11-010-661-11 FLEXIBLE FLAT CABLE 41P(B-
ONT) CN6801(B)-CN2201(ONT)(1)
21-010-662-11 FLEXIBLE FLAT CABLE 51P(B-
ONT) CN6800(B)-CN2200(ONT)(1)
31-010-667-11 FLEXIBLE FLAT CABLE 51P(OT1) CN2400(ONT)-J102(TCON)(1)
41-010-668-11 FLEXIBLE FLAT CABLE 51P(OT2) CN2401(ONT)-J103(TCON)(1)
51-010-669-11 FLEXIBLE FLAT CABLE 51P(OT3) CN2600(ONT)-J104(TCON)(1)
61-010-670-11 FLEXIBLE FLAT CABLE 51P(OT4) CN2601(ONT)-J105(TCON)(1)
71-912-989-11 CONNECTOR ASSY 2P CN6501(PSU)-CN6503(PSU)-
CN6502(PSU)-CN6504(PSU)(1)
81-010-590-11 CONNECTOR ASSY 28P(PWR1) CN1700(B)-CN6401(PSU)-CN401(ONT)(1)
91-010-591-11 CONNECTOR ASSY 28P(PWR2) CN6402(PSU)-CN6601(PSU)-CN1000(LD)-
CN1001(LD)(1)
10 1-010-592-11 CONNECTOR ASSY 16P CN6403(PSU)-J101(TCON)(1)
11 1-010-593-11 HARNESS ASSY(SP) CN6605(B)-SP-CN6606(B)(1)
12 1-010-656-11 FLEXIBLE FLAT CABLE 14P CN6802(B)-CN1200(ONT)(1)
13 1-010-657-11 FLEXIBLE FLAT CABLE 20P/25P CN103(H)-CN1200(B)-CN3803(B)-BT(1)
14 1-010-658-11 FLEXIBLE FLAT CABLE 30P CN6200(B)-CN1002(LD)(1)
14
2
1
13
13
12
6
5
4
3
8
9
7
10
11
HARNESS/CABLES 75”

REF. NO PART NO. DESCRIPTION REMARKS
71-002-004-12 C18 AC INLET Cable
22 A-5026-240-A COMPL SVC BM5S21_AQ_EUUK Printed Circuit Board, incl. capacitors
27 1-006-772-21 G06B - STATIC CONVERTER(TV) Internal Power Supply
28 1-006-773-21 G07B - STATIC CONVERTER(TV) Internal Power Supply
34 A-503-455-1A P-MOD (HDBO075DDU02)(SVC) Liquid Crystal Display
1-002-007-11 C17 AC CORD SET(SWISS) XR-75Z9J (CEI)
Cable
1-912-832-11 POWER-SUPPLY CORD SET(EU) XR-75Z9J (CEI, CEP)
1-001-115-12 POWER-SUPPLY CORD SET(UK) XR-75Z9J (UKA)
SET PART LIST
9
PART LIST 75”

DISSASSEMBLY AND REMOVAL CAUTION 85”
10