Sony KV-21HFV100 User manual

Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Tr initron Color TV
Operating Instructions
•Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-21HFV100
© 2004 Sony Corporation
2-187-288-11 (1)
GB

2
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110-240 V AC.
•Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
•To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may be
subject to excessive dust, heat, moisture or
vibrations.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto it.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to
clean the TV. Do not attach anything (e.g., adhesive
tape, cellophane tape, glue) on the painted cabinet of
the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.

3
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.

4
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xSecuring the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
Note
•Use only the supplied screws. Use of other screws may damage the TV.
or

5
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
GB
Table of Contents
Installation
Hooking up the system ....................... 6
Getting Started ..................................... 7
Setting up your TV
(“Initial Setup”) .................................... 8
Overview of Controls
TV top control, front and
rear panels............................................. 9
Using the remote control and
basic functions .................................... 10
Advanced Operations
Selecting the picture and sound
modes .................................................. 12
Enjoying the WEGA Theatre
Mode .................................................... 13
Enjoying the Party Mode .................. 14
Listening to the FM Radio ................ 15
Enjoying stereo or bilingual
programs ............................................. 16
Operating optional components ...... 17
Menu Adjustment
Introducing the menu system .......... 18
Changing the “Video” setting .......... 20
Changing the “Audio” setting ......... 21
Changing the “Channel Setup”
setting .................................................. 23
Changing the “Timer” setting .......... 25
Changing the “Feature” setting ....... 26
Changing the “Setup” setting .......... 27
Additional Information
Connecting optional components ... 28
Troubleshooting ................................. 30
Specifications ...................... Back cover

6Installation
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Installation
xHooking up the system
Perform the following procedures 1to 2(optional) to hook up your system
using the supplied cords and accessories.
1Connect the speakers
Connect the right and left speaker
cords to the SPEAKER terminals as
shown below.
2Attaching the rubber
foots (optional)
If you want to place the speakers on
a horizontal position, attach four
supplied rubber foots at the space
provided to stabilize the speakers
and to prevent them from slipping.
Right speaker Left speaker
20 cm 20 cm
Notes
• Connect only the supplied speakers; otherwise your TV may malfunction.
• Unplug your TV from the wall outlet when connecting the supplied speakers.
• For best sound quality effect, place the TV speakers at least 20 cm away from the TV.
+– +
Blue (3)
Blue (3)
Red (3)
Red (3)Black (
# )
Black (
# )
L
R
L
R
SPEAKER (6 )

7
Installation
Installation
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xGetting Started
¿
Initial Setup
Language:
Move
English
Select [TV/VIDEO]
End [MENU]
b
b
1
Step 1
Insert the batteries (supplied) into the remote.
Note
•Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 8).
Plug in the power cord, then press !on the TV to
turn it on.
Note
• The 1(standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tips
•Your TV can receive both TV and FM radio signals from the
appropriate connections through the 8(antenna input)
terminal (see page 28).
•You can also connect your TV to other optional components
(see page 28).

8Installation
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
x Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the top control panel.
Tip
•The MENU, and V/v/B/b buttons on the remote control can also be used for the
operations below.
1Press VOLUME +/– to select the desired
menu language, then press TV/VIDEO.
The selected menu language appears.
2Press VOLUME +/– to select “Yes”, then
press TV/VIDEO to preset the channels
automatically or select “No” to skip
automatic channel presetting.
Once you select “Yes”, your TV will start
searching for all the available channels.
If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press TV/VIDEO.
3Press VOLUME +/– to adjust the bars on
the top and bottom of the menu if they
are slanted, then press TV/VIDEO.
If no adjustment is necessary, then
press TV/VIDEO.
4Press VOLUME +/– to select “No”, then
press TV/VIDEO. This menu will not
appear again the next time you turn on
the TV by pressing !.
To allow this menu to appear again, select
“Yes”, then press TV/VIDEO.
Tips
•You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
•You can also set up your TV by using the menu system (see page 18) or by pressing the
MENU button on the top control panel for about five seconds to reset the TV (see page 30).
Initial Setup
Language:
Move
English
Select [TV/VIDEO]
End [MENU]
Initial Setup
First please connect cable/
antenna
Start Auto Program now?
Yes
No
Move Select [TV/VIDEO] End [MENU]
Initial Setup
Display this menu next time?
Yes
No
Move Select
[TV/VIDEO]
Tilt Correction
[ – VOL ] [ VOL + ]
Move [– VOL +]
Select [TV/VIDEO] End [MENU]

9
Overview of Controls
Overview of Controls
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
L(MONO) R
CHANNEL
MENU TV/VIDEO VOLUME
FM
qd qs qa 09
5
7
8634 12
VIDEO AUDIO
VIDEO 2 INPUT
L
RR
L
Y
C
B
C
R
(MONO)
(MONO)
AUDIO AUDIO
VIDEO
S VIDEO
VIDEO
VIDEO 1 IN DVD IN MONITOR OUT
qgqhqj
qf
qk
ECHO LEVELMIC LEVEL
MIN MAX MIN MAX
+—+
MIC
Overview of Controls
TV front panel
TV rear panel
xTV top control, front and rear panels
TV top control panel
Button/Terminal Function Page
1Remote control sensor. –
2Wake Up indicator. 25
21Standby indicator. 7
3!Turn off or turn on the TV. 7
4VIDEO 2 INPUT Video input terminal 2. 28
5iHeadphone jack. –
6ECHO LEVEL Adjust microphone echo level. 14
7MIC LEVEL Adjust microphone volume. 14
8MIC Microphone input terminal. 14
9CHANNEL +/– Select channel number. –
0VOLUME +/– Adjust volume. –
qa TV/VIDEO Select TV or video input. 28
Menu operations
0VOLUME +/– Select and adjust items. –
qa TV/VIDEO Confirm selected items. –
qs MENU Display or cancel the menu. –
qd FM Listen to FM Radio. 15
qf 8Antenna input terminal. 28
qg MONITOR OUT Monitor output terminal. 29
qh DVD IN Component video input terminal. 29
qj VIDEO 1 IN Video input terminal 1. 28
qk SPEAKER (6 Ω)Speaker terminal. 6

10 Overview of Controls
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xUsing the remote control and basic
functions
123
46
789
0
5
DVD TVVIDEOFM
MENU
OPTION RESET SLEEPWAKE UP
TV
CH
VOL
MUTING DISPLAY VIDEO
POWER POWER
PICTURE
MODE
JUMP ENT
SOUND
MODE
WIDE
MODE
MTS/SAP
WEGA
THEATRE
qf
qg
qh
qj
w;
qk
wa
ws
wd
wf
ql
3
1
2
4
5
6
7
8
9
0
qa
qs
qd
Button Description Page
1POWER Turn off temporarily or –
turn on the TV.
2TV Display the TV program. –
3VIDEO Select video inputs. 28
4 WEGA THEATRE Select WEGA Theatre Mode. 13
Stereo/bilingual operations
5MTS/SAP Select stereo/bilingual mode. 16
Menu operations
6MENU Display or cancel the menu. –
7V, v,B,b Select and adjust items. –
8Confirm selected items. –
9WIDE MODE Change the picture size: –
“On” (16:9 wide-mode), “Off”.
00 – 9 Input numbers. –
qa ENT Confirm channel number. –
qs CH +/– Select channel number. –
Timer operations
qd SLEEP Set TV to turn off automatically
according to the desired period –
of time.
qf WAKE UP Set TV to turn on automatically
according to the desired period –
of time.
qg MUTING Mute the sound. –
qh DISPLAY Display on-screen information. –
FM Radio operations
qj FM Listen to FM Radio. 15
5MTS/SAP Select stereo or mono mode. 15
7V, v Search desired FM radio station. 15
7B,b Fine tune radio frequency. 15
qs CH +/– Select preset FM radio station. 15
qk DVD Select component video input. 29
ql PICTURE MODE Select picture mode options. 12
w; SOUND MODE Select sound mode options 12
with a 5-Band Graphic
Equalizer display.

11
Overview of Controls
Overview of Controls
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Button Description Page
wa Select audio effect mode options: –
“Effect Off”, “Simulated” (stereo-like monaural
sound), “WOW” (full, deep bass sound),
“TruSurround” (surround sound that spreads out to
the rear of a room).
ws JUMP Jump to last channel number that has been watched –
for at least five seconds.
wd VOL +/– Adjust volume. –
wf RESET Set TV to factory setting while adjusting items in an –
on-screen menu.
Optional components operations
VIDEO POWER,
OPTION, For details, see “Operating optional components”. 17
N, X,x, ., >
WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW
and TruSurround technologies are incorporated under license from SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866.
“BBE” and BBE symbol are trademarks of BBE Sound, Inc.

12 Advanced Operations
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Advanced Operations
Selecting the sound mode
Press SOUND MODE on the remote control to select the desired sound mode with
a 5-Band Graphic Equalizer display.
Select To listen to
“Movie” dynamic and clear sound that emphasizes the low and
high tones.
“News” sound that emphasizes vocals.
“Soft” soft, natural and relaxing sounds.
“Standard” standard flat sounds.
xSelecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your personal
preference.
Selecting the picture mode
Press PICTURE MODE to select the desired picture
mode.
Select To view
“Vivid” contrast and sharp pictures.
“Standard” standard pictures.
“Movie” finely detailed pictures.
“Sports” bright pictures.
123
46
789
0
5
DVD TV
MTS/SAP
VIDEOFM
MENU
WEGA
THEATRE
MUTING DISPLAY VIDEO
POWER
POWER
PICTURE
MODE
JUMP ENT
SOUND
MODE
WIDE
MODE
Movie
100 300 1k 3k 8k
100 300 1k 3k 8k
News
100 300 1k 3k 8k
Soft
100 300 1k 3k 8k
Standard
SOUND
MODE
PICTURE
MODE

13
Advanced Operations
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xEnjoying the WEGA Theatre Mode
The WEGA Theatre Mode enables you to enjoy the best picture, sound and
surround effect of a cinema from a DVD source.
Setting up the WEGA Theatre Mode
1Place your TV and the connected equipment adjacent to each other so that
you can control both the TV and the connected equipment simultaneously
by using the TV’s remote control (see page 17).
2Select the proper input from the “WEGA Theatre Setup” menu (see page
26) and turn on (main power) the connected equipment.
3Set up the remote to work with the connected equipment (see page 17).
Notes
• The WEGA Theatre Mode is automatically cancelled when you change the channel number,
video input or turn the TV off and on again.
•Some equipment might not respond properly when WEGA THEATRE button is pressed. In
this case, use the equipment’s own remote control.
To Press
switch to WEGA WEGA THEATRE.
Theatre mode Be sure to aim the remote control
at the TV set and the connected
equipment for about one second
after the button is pressed.
The connected equipment turns
on automatically from standby
mode and will start playing.
The picture and sound modes
will switch automatically to
“Movie” and you can adjust the
setting to your personal
preference (see pages 20 and 22).
123
46
789
0
5
DVD TV
MTS/SAP
VIDEOFM
MENU
WEGA
THEATRE
MUTING DISPLAY VIDEO
POWER
POWER
PICTURE
MODE
JUMP ENT
SOUND
MODE
WIDE
MODE
WEGA
THEATRE

14 Advanced Operations
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xEnjoying the Party Mode
You can sing along with any music program of TV broadcast or with any audio/
video equipment or create visual presentations (e.g. photos or video stories) with
narration and favorite background music by using the Party Mode feature.
1
Select the input connected to your audio/video equipment (see pages 28 and 29).
2Connect the microphone (not supplied) to the microphone input terminal
and switch it on.
You can begin singing or speaking from the microphone at the last TV volume
setting.
3Turn the MIC LEVEL and ECHO LEVEL knobs on the TV front panel to adjust
the microphone volume and echo level of the microphone sound.
4
If you want to change the audio source, display the “Feature” menu and select
the input connected to the audio equipment which you want to hear from
“Audio Input Fix” in “Party Mode Setup” (see page 26).
To revert to the original sound source, display the “Feature” menu and select
“Off” from “Audio Input Fix” in “Party Mode Setup” (see page 26).
Tip
• Microphone volume will be affected by TV volume.
Notes
•Be sure to adjust the MIC LEVEL and ECHO LEVEL knobs on the TV front panel to the
minimum level before plugging in and disconnecting the microphone.
•For your own safety, do not use or plug in the microphone during lightning storms.
• Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback
(howling) and distortion.
L(MONO) R
VIDEO AUDIO
VIDEO 2 INPUT
ECHO LEVELMIC LEVEL
MIN MAX MIN MAX
MIC
OFF
ON
TV front panel

15
Advanced Operations
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xListening to the FM Radio
You may access the FM Radio mode directly by pressing the FM button on the
top control panel (see page 9) or on the remote control. To exit from FM Radio
mode, press the FM button again.
Listening to preset stations
1Press the FM button on the remote control
and preset the desired FM radio stations in
““FM Radio Setup” from “Feature” menu first
(see page 26).
2Press MENU to exit from “Feature” Menu.
The selected preset FM radio station number
and label will appear on the screen.
To select the desired preset FM radio station,
press CH +/–.
Tip
• You can also use the 1 – 9 buttons on the remote
control to directly select the desired preset FM
radio station.
Listening to non-preset stations
1Press the FM button on the remote control.
The FM Radio mode will appear on the
screen.
Press Vor vto search for the desired FM
radio station. The preset number and label
will not be displayed.
2If the station has a weak signal, press Bor b
to fine tune the radio frequency manually.
Notes
•The available radio frequency is only for
temporary listening pleasure and cannot be stored
in the memory.
•If the message “Please setup FM Radio” appears,
display the “Feature” menu and select “FM Radio
Setup” to preset the desired FM radio stations (see
page 26).
123
46
789
0
5
DVD TV
MTS/SAP
VIDEOFM
MENU
OPTION RESET SLEEPWAKE UP
TV
CH
VOL
WEGA
THEATRE
MUTING DISPLAY VIDEO
POWER
POWER
PICTURE
MODE
JUMP ENT
SOUND
MODE
WIDE
MODE
FM
MTS/
SAP
Tip
• When an FM stereo program has static noise, press MTS/SAP until “Mono” appears. There
will be no stereo effect, but the noise will be reduced.
CH +/–
V,v,B,b

16 Advanced Operations
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xEnjoying stereo or bilingual
programs
You can enjoy stereo sound or bilingual programs of MTS (Multi-Channel TV
Sound) stereo system by using the MTS/SAP button.
MTS/
SAP
123
46
789
0
5
DVD TV
MTS/SAP
VIDEOFM
MENU
OPTION RESET SLEEPWAKE UP
TV
CH
VOL
WEGA
THEATRE
MUTING DISPLAY VIDEO
POWER
POWER
PICTURE
MODE
JUMP ENT
SOUND
MODE
WIDE
MODE
Select stereo or bilingual programs
Press MTS/SAP until you receive the sound you
want.
Select To listen to
“Stereo” stereo broadcast sound.
“Auto SAP” SAP (Second Audio Program)
broadcast sound.
“Mono” monaural sound.
Notes
•When select “Auto SAP”, non-SAP program sound will be the same as “Stereo” mode sound.
•If the stereo signal is very weak, the stereo broadcast sound may become noisy. To reduce the
noise, select “Mono”.

17
Advanced Operations
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xOperating optional components
You can use the supplied remote to operate Sony video equipment.
Setting up the remote to work with other connected equipment
While keeping VIDEO POWER For example, to operate a
pressed, press the corresponding Sony 8 mm VCR:
number button for the desired
equipment (see the chart
below).
To control Hold down VIDEO POWER and press
DVD 1, 2 or 3 0, 1 or 2
VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 3, 4 or 5
+
VIDEO
POWER
4
To Press
turn on/off VIDEO POWER.
play Nwhile keeping OPTION pressed.
stop xwhile keeping OPTION pressed.
fast forward/ step forward or rewind/ >or .while keeping OPTION
step backward pressed.
pause Xwhile keeping OPTION pressed.
Press again to resume normal playback.
Note
•If the equipment does not have a certain function, the corresponding button on the remote will
not operate.
Operating video equipment
Press VIDEO POWER or while keeping OPTION pressed, press N, x, >, .
or X(see the chart below).

18 Menu Adjustment
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Menu Adjustment
xIntroducing the menu system
The MENU button lets you open a menu and change the settings of your TV.
The following is an overview of the menu system.
Return icon
Feature icon
Channel Setup icon
Name of the current
menu
Video icon
Menu level 3
Menu level 2
User Guidance
Menu level 1
Level 1
“Video”
“Audio”
Level 2
“Mode”
“Picture Controls”
“Color Temp.”
“VM”
“Intelligent Picture”
“Mode”
“Sound Controls”
“Balance”
“Steady Sound”
“Effect”
“MTS”
Level 3/Function
Select the picture mode:
“Vivid” t“Standard” t“Movie” t“Sports”
Adjust the picture mode option:
“Picture” t“Brightness” t“Color” t
“Hue” t“Sharpness”
Adjust white color tint:
“Cool” t“Neutral” t“Warm”
Sharpen the edges of each object:
“High” t“Low” t“Off”
Optimize picture quality:
“On” t“Off”
Select the sound mode:
“Movie” t“News” t“Soft” t“Standard”
Adjust sound frequency settings.
Select to emphasize the left and right speakers.
Adjust volume automatically:
“On” t“Off”
Select audio effect mode:
“Off” t “Simulated” t “WOW” t “TruSurround”
Select stereo/bilingual mode:
“Stereo” t “Auto SAP” t“Mono”
Page
20
21
Select End
Setup
16:9 Enhanced:
Video Label
Language: English
Color System:
Tilt Correction
Move
Audio icon
Timer icon
Setup icon
Tip
•If you want to exit from Menu level 2 to Menu level 1, press Vor vuntil the return icon ( ) is
highlighted, then press .
Note
•When a feature is dimmed in the menu, it is not selectable.

19
Menu Adjustment
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
Level 1
“Channel Setup”
“Timer”
“Feature”
“Setup”
Level 2
“Favorite Channels”
“Cable”
“Auto Program”
“Channel Skip/Add”
“Channel Label”
“Channel Block”
“Sleep”
“Wake Up Timer”
“FM Radio Setup”
“WEGA Theatre
Setup”
“Party Mode
Setup”
“Language”
“Tilt Correction”
“16:9 Enhanced”
“Video Label”
“Color System”
Level 3/Function
Quick access to favorite channels.
Watch cable TV programs:
“On” t“Off”
Preset channels automatically.
Skip unwanted channels or add new ones.
Label the channel number.
Block unwanted channels.
Set TV to turn off automatically.
Set TV to turn on automatically.
Preset FM radio stations.
Select the WEGA Theatre Mode.
Adjust your TV for Party Mode.
Change the menu language:
“English” t “” (Chinese)
Adjust the picture position.
Change the picture size:
“On” t “Off”
Label the connected equipment.
Select the color system (for video input only):
“Auto” t “PAL” t “SECAM” t “NTSC3.58”
t “NTSC4.43”
Page
23
25
26
27

20 Menu Adjustment
Sony KV-21HFV2100 Group J3 (GB)_2-187-288-11 (1)
xChanging the “Video” setting
The “Video” menu allows you to adjust the picture settings.
1Press MENU.
2Make sure the “Video” icon ( ) is
selected, then press .
3Press Vor vto select the desired item (e.g., “Mode”), then press .
Select To
“Mode” choose either “Vivid”, “Standard”, “Movie” or
“Sports” (see page 12).
Tip
•You can adjust the setting to your personal
preference in the “Picture Controls” option.
“Color Temp.” adjust white color tint.
(Color Temperature) Choose either “Cool” (blue tint), “Neutral” (neutral
tint) or “Warm” (red tint).
“VM” sharpen the edges of each object.
(Velocity Modulation) Choose either “High”, “Low” or “Off”.
“Intelligent Picture” optimize picture quality.
Press Vor vto select “On”, then press .
To cancel, select “Off”, then press .
Adjusting the “Picture Controls” items
1Press vto select “Picture Controls”, then press .
2Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
“Hue” (color tones) or “Sharpness”, then press .
Pressing RESET button on the remote control will set your TV to the factory
setting.
3Press V,v,B or bto adjust the setting of your selected item, then press .
4Repeat the above steps to adjust other items.
The adjusted settings will be memorized.
Note
•Reducing “Sharpness” can also reduce picture noise.
Color Temp.:
VM:
Intelligent Picture: On
High
Cool
Picture Controls
Vivid
Select End
Move
Mode:
Video