Sony FD Trinitron WEGA KV-36HS510 Installation instructions

CONTROL DOOR
INSTALLATION AND DISASSEMBLY INSTRUCTIONS
FOR MODELS:
KV-32HS510
KV-34DRC510
KV-36HS510
KV-38DRC510
Page I of 8

INSTALLATION OF
STEP (_
HS DOOR
(
k
Ii.-B
2..o,.o..o.r
'_'-B
IOIi_'Y
/
.OOo°ooooooo _--oQ
_A___PIVOT AREAS
BEZNET
DOOR DAMPER FOOT
DOOR DAMPER
7
A-A
_ 3Xt2 SCREW(_)
- INSERT DOOR DAMPER WITH THE DOOR DAMPER FOOT IN
THE UP POSITION (SEE ILLUST. A-A).
- SECURE WITH A 3x12 SCREW.

INSTALLATION
STEP OF HS DOOR
STEP (3)
SWING THE DAMPER FOOT
TO THE DOWN POSITION.
STEP @
- ALIGN DOOR HINGES WITH
PIVOTS ON BEZNET.
- PUT THE DAMPER FOOT
INTO THE DOOR'S HOOK.
I
B-B
PUSH BOTH DOOR HINGES ONTO THE BEZNET'S DOOR
PIVOTS. PUSH DOWN UNTIL YOU CAN HEAR THEM
"CLICK" INTO PLACE.

I NSTALLAT ION
STEP
OF HS DOOR
SOI_Y
oe_eo 00000
DOOR IN OPEN
POSITION
APPLY PRESSURE ALONG EDGE
OF OPEN DOOR
PUSH ON THIS
EDGE
TO ENGAGE THE DOOR DAMPER INTO THE DOOR,! PUSH FORWARD
WHILE PUSHING UP AT THE SAME TIME. DO THIS UNTIL THERE
IS A"CLICK" HEARD FROM THE DAMPER FOOT BEING SEATED
INTO THE DOOR.
44r-_

/

DISASSEMBLY OF HS DOOR
STEP (_)
NOTE C
PULL OUTWARD FROM
BOTTOM EDGE OF DOOR
D-D
NOTE C :
WHEN DOOR IS IN THE CLOSED POSITION, PULL AT HATCHED
(SEE ABOVE ILLUSTRATION)AREA FORWARD. PULL LIGHTLY
UNTIL A "CLICK" SOUND IS HEARD. THIS WILL MEAN THAT
THE DOOR HAS BEEN SEPARATED FROM THE DOOR DAMPER.

DISASSEMBLY OF HS DOOR
STEP @
0oop,,o_o._,oepe
/
I VOT AREAS
!
E-E
- OPEN DOOR.
-PULL DOOR HINGE AREAS FORWARD
(AWAY FROM BEZNET) TO RELEASE DOOR.

Overview
This chapter includes illustrated instructions for setting up your TV.
TV ContTols and Connectors 10-13
Basic Connections: Connecting a Cable or Antenna 14-20
Connecting Optional Equipment
VCR and Cable 22
VCR and Cable Box 24
Two VCRs for Tape Editing 26
Satellite Receiver 28
Satellite Receiver and VCR 30
DVD Player with Component Video Connectors 32
DVD Player with S VIDEO and Audio Connectors 34
Camcorder 35
Audio Receiver 36
Us_g the coNTROL SFea_re 37 .....
Setting Up the Channel List 38
About the AC
Power Cord The AC power cord is attached to the rear of the TV with a hook. Use
caution when removing the AC plug from its holder. Gently slide the
plug upward to remove it from the hook. Once removed, the AC
power plug should automatically disengage from its stored location.
ACpower cord
You can detach
the cord from
this hook
Do not plug in the ACpower cord until you have made all other
connections.
9

TV Controls and Connectors
Front Panel
10