Sony QUALIA KDS-R50XBR1 User manual

KDS-R50XBR1
KDS-R60XBR1
Sony Corporation © 2005 Printed in Japan
2-637-152-11(1)
Quick Setup Guide
Connecting Your TV
(See reverse side)
Programming
the Remote Control
Running Initial Setup
For further information, see the operating instruction supplied with the TV.
Please retain this guide for your future reference.
Please follow these steps to setup your TV:
zzz
For service and technical assistance, call our Customer Information Service Center (Toll Free):
US residents: 1-800-222-SONY (7669) or visit http://www.sonystyle.com/tv/
Canadian residents: 1-877-899-SONY (7669) or visit http://www.sonystyle.ca/tv/
DO NOT RETURN TO THE STORE
2
1
3
zzz
Projection Lamp: Periodic replacement of the projection lamp
will maintain the picture quality.
See the “Replacing the Lamp” section of the manual.
Wide Mode: Selecting the appropriate screen mode will increase
enjoyment of your TV viewing.
When watching a Standard Definition source (4:3 aspect
ratio) on this TV, you will see bars on both the left and right
sides of the screen. Press the WIDE button on your remote to
cycle through different screen modes to fill the screen in
various ways. (Wide Zoom enlarges the center, Normal is
how your TV receives the signal, Full stretches horizontally
and Zoom enlarges the image proportionately to fill the
screen.)
When watching a High Definition source (16:9 aspect ratio)
on this TV, you will see the screen filled with an image. Press
the WIDE button on your remote to toggle through different
screen modes, especially zooming in to the center of the
screen. (Wide Zoom enlarges the center, Full displays the
image at its original size, Zoom enlarges the image
proportionately to fill the screen.)
When the TV receives a 720p or 1080i formatted signal, the
Normal mode is not available. See the “Using the WIDE
Button” section of the manual.
If you feel the images on the screen are stretched, press the WIDE button to select a
different screen mode.
Notes on your new TV
Running Initial Setup
1Press to turn on the TV.
The Initial Setup screen appears.
2Press V or vto highlight the on-screen
display language. Then press .
The message “First please connect
cable/antenna” appears. This may require 50+ minutes for
completion and “Start auto program now?” appears.
3Press (Yes) to start Initial Setup.
Initial Setup automatically creates a list of
receivable channels from both VHF/UHF
antenna and cable TV channels if both
sources are connected.
When Initial Setup is complete, the TV
will display the total number of analog channels and the total
number of digital channels found.
4Press to exit this screen.
To run Auto Program again at a later time
Refer to the manual on “Initial Setup” and “Auto Program” sections.
2
Best Audio/Video
Performance
Activating CableCARD™ Service
Before you can use CableCARD service, you need to insert the
CableCARD device (supplied by your cable provider) and activate
the service.
Inserting the CableCARD incorrectly may result in permanent damage to the card and
the TV.
The connection diagrams shown on the reverse side are
recommendations only; other possible solutions may
exist. Connections that include an AV receiver can often
be complex, so check your AV receiver’s instruction
manual for additional details.
See the “Cables Required” chart that appears with the
diagram to determine which cables you’ll need.
Depending on the components you plan to connect, you
may need to purchase extra cables.
1Connecting Your TV
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony Equipment Programmable Code Number
DVD/VCR 751 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
i.LINK 901 (Sony DVD Player (i.LINK))
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
1Press repeatedly until the DVD/VCR, SAT/
CABLE or i.LINK indicator lights up.
2Press for five seconds until the
indicator of the selected input flashes.
3While the desired indicator is flashing, enter the
three-digit manufacturer’s code number.
4Press .
To check if the code works
Aim your TV’s remote control at the equipment, and press
the button. If the equipment responds, the
programming is completed. If not, try the next code listed.
3
If no code is input within the above specified time, or an invalid or incorrect code
number is input, the remote control automatically goes back to the previous setting.
In some cases, you may not be able to program your remote control to operate other
equipment. In such cases, use the equipment’s own remote control.
Removing the batteries or dead batteries may cause the programmed codes to be lost
and revert back to the factory setting. Reprogramming the codes may be necessary.
Making Audio/Video Connections
Your new TV includes various types of video inputs and two types
of audio jacks; composite-RCA type and digital audio (optical).
Use the outputs/inputs that are available on your components that
provide the best video/audio performances:
Connector type
HDMI
(High-Definition Multimedia
Interface)
DVI (Digital Visual Interface)
Will require an adapter to connect to this TV.
Component video
S VIDEO
Composite video
RF/Coaxial
Review the following chart to determine which diagram to use to connect the components in your system:
Turn off and unplug all components before making connections.
Connector type
Digital Optical
Digital Coaxial
Will require an adapter
to connect to this TV’s
digital audio input.
Analog Audio
PCM/DOLBY DIGITAL
DIGITAL
AUDIO
(OPTICAL
OUT)
Sony
Dream System
HD DVR
PC
PC
Player
DVD
Player
DVD
Player
DVD
Player
DVD
Player
DVD
CableCARD
(optional)
VCR
VCR
VCR
VCR
VCR
Cable Box
Cable Box
Cable Box
Satellite Receiver
Satellite Receiver
Satellite Receiver
AV Receiver
AV Receiver
HD Cable Box
HD Cable Box
HD Sat Receiver
HD Sat Receiver
Digital Recorder
Sony
Dream System
AV Receiver
Cable Box
HD Cable Box
Satellite Receiver
Digital Recorder
Player
DVD
VCR
2
3
4
1
Manufacturer’s codes
DVD Players
Manufacturer Code
Sony 751
Sony (i.LINK) 901
General Electric 755
Hitachi 758
JVC 756
Magnavox 757
Mitsubishi 761
Oritron 759
Panasonic 753
Philips 757
Pioneer 752, 778
RCA/PROSCAN 755
Samsung 758
Toshiba 754
Zenith 760
Laserdisc Players
Manufacturer Code
Sony 701
Panasonic 704, 710
Pioneer 702
VCRs
Manufacturer Code
Sony 301, 302, 303
Admiral (M. Ward) 327
Aiwa* 338, 344
Audio Dynamic 314, 337
Broksonic 317, 319
Canon 308, 309
Citizen 332
Craig 302, 332
Criterion 315
Curtis Mathes 304, 309, 338
Daewoo 309, 312, 341
DBX 314, 336, 337
Dimensia 304
Emerson 316, 317, 318, 319,
320, 341
Fisher 330, 335
Funai 338
General Electric 304, 309, 329
Go Video 322, 339, 340
Goldstar 332
Hitachi 304, 305, 306, 338
Manufacturer Code
Instant Replay 308, 309
JC Penney 304, 305, 309, 314,
330, 336, 337
JVC 314, 336, 337, 345,
346, 347
Kenwood 314, 332, 336, 337
LG 332
LXI (SEARS) 305, 330, 332, 335,
338
Magnavox 308, 309, 310
Marantz 314, 336, 337
Marta 332
Memorex 309, 335
Minolta 304, 305
Mitsubishi/MGA 323, 324, 325, 326
Multitech 321, 325, 338
NEC 314, 336, 337
Olympic 308, 309
Optimus 327
Orion 317
Panasonic 306, 307, 308, 309
Pentax 304, 305
Philco 308, 309
Philips 308, 309, 310
Pioneer 308
Quasar 306, 308, 309
RCA/PROSCAN 304, 305, 308, 309,
310, 311, 312, 313,
329
Realistic 309, 324, 328, 330,
335, 338
Sansui 314
Samsung 313, 321, 322
Sanyo 330, 335
Scott 312, 313, 321, 323,
324, 325, 326, 335
Sharp 327, 328
Signature 2000 (M.Ward) 327, 338
SV 2000 338
Sylvania 308, 309, 310, 338
Symphonic 338
Tashiro 332
Tatung 314, 336, 337
Teac 314, 336, 337, 338
Technics 308, 309
Toshiba 311, 312
Wards 327, 328, 331, 332,
335
Yamaha 314, 330, 336, 337
Zenith 331
Cable Boxes
Manufacturer Code
Sony 230
Hamlin/Regal 222, 223, 224, 225,
226
Jerrold/ 201, 202, 203, 204,
General Inst./ 205, 206, 207, 208,
Motorola 218
Oak 227, 228, 229
Panasonic 219, 220, 221
Pioneer 211, 214, 215
Scientific Atlanta 209, 210, 211
Tocom 216, 217
Zenith 212, 213
Satellite Receivers
Manufacturer Code
Sony 801
Dish Network 810
Echostar 810
General Electric 802
Hitachi 805
Hughes 804
Mitsubishi 809
Panasonic 803
RCA/PROSCAN 802, 808
Toshiba 806, 807
*If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.

Rear of TV
RGB
PC IN 8
AUDI O
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1345
IN OUT
CONTROLS
HD/DVD IN
(1080i/720p/480p/480i)
IN
67
AUDIO IN
RL
VHF/UHF
CABLE
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
L
R
(MONO)
AUDI O
L
R
L
R
AUDIO
VIDEO
S VIDEO
Y
P
P
B
R
S400
i.LINK
(DV/HDV/MICROMV/TS)
Sony Dream System
Cable Box* or
Satellite Receiver
OUT
IN
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
Splitter
Cable
COMPONENT VIDEO OUT
VIDEO 2
LR
VIDEO 1
AUDIO OUT
AUDIO IN
LR
LR
VIDEO OUT
VIDEO IN
VIDEO INAUDIO IN
Y P B /C B P R /C R
MONITOR OUT
S VIDEO
DIGITAL
AUDIO
(OPTICAL
IN)
or
Terrestrial
Antenna
Rear of TV
RGB
PC IN 8
AUDI O
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1345
IN OUT
CONTROLS
HD/DVD IN
(1080i/720p/480p/480i)
IN
67
AUDIO IN
RL
VHF/UHF
CABLE
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
L
R
(MONO)
AUDIO
L
R
L
R
AUDIO
VIDEO
S VIDEO
Y
P
P
B
R
S400
i.LINK
(DV/HDV/MICROMV/TS)
R
L
INPUT
LINE IN
VIDEO
VIDEO
OUT
AUDIO
OUT
A/V
TV VCRDVD
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
Splitter
Cable
OUT
IN
Cable Box* or
Satellite Receiver
SAT IN
PC
Terrestrial
Antenna
Rear of TV
RGB
PC IN 8
AUDIO
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1345
IN OUT
CONTROLS
HD/DVD IN
(1080i/720p/480p/480i)
IN
67
AUDIO IN
RL
VHF/UHF
CABLE
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
L
R
(MONO)
AUDI O
L
R
L
R
AUDI O
VIDEO
S VIDEO
Y
P
P
B
R
S400
i.LINK
(DV/HDV/MICROMV/TS)
Satellite
Antenna
Cable
LINE OUT
AUDIO VIDEO
RL
SAT IN
ANT IN
CABLE IN
OUT TOTV
Satellite
Receiver
OUT
IN
Cable Box*
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
Splitter
Cable Terrestrial
Antenna
A B C
DE F
Cables Required
Splitter 1
Coaxial 4
Composite 1
Component 1
Audio 2
HD15-HD15 1
Use this diagram if you have:
Cable Antenna
CableCARD
(optional)
VCR
Player
DVD
PC
If your DVD player has an HDMI jack,
use that instead of the video
connections shown here.
CableCARD use is optional; contact your cable TV provider.
See the Operating Instructions for details on using CableCARD.
*Cable box may not be required if using CableCARD.
See the Operating Instructions for details.
*Cable box may not be required if using CableCARD.
See the Operating Instructions for details.
*Cable box may not be required if using CableCARD.
See the Operating Instructions for details.
Use this diagram if you have:
Cable/SAT Antenna
Cable Box
VCR
Player
DVD
PC
AV Receiver
or
Satellite Receiver
Cables Required
Splitter 1
Coaxial 5
Composite 3
Component 1
Audio 3
HD15-HD15 1
If you are not using a cable box or satellite receiver,
connect your cable to the VCR’s RF IN jack.
If your DVD player or satellite receiver
has an HDMI jack, use that instead of
the video connections shown here.
Use this diagram if you have:
Cable/SAT Antenna
Cable Box
VCR
Player
DVD
Satellite Receiver
Cables Required
Splitter 1
Coaxial 6
Composite 3
Component 1
Audio 1
HDMI 1
If you are not using a cable box, connect
your cable to the VCR’s RF IN jack.
If your DVD player or satellite receiver
has an HDMI jack, use that instead of
the video connections shown here.
Cables Required
Splitter 1
Coaxial 5
Component 3
Audio 3
HDMI 1
Digital Optical 2
Audio
Use this diagram if you have:
Cable/SAT Antenna
HD Cable Box
Player
DVD
AV Receiver
Digital Recorder
or
HD Sat Receiver
Use this diagram if you have:
Cable/SAT Antenna
HD Cable Box
VCR
Player
DVD
or
HD Sat Receiver
or
HD DVR
Cables Required
Coaxial 2
Composite 2
Component 1
Audio 1
HDMI 1
Use this diagram if you have:
Cable/SAT Antenna
Cable Box
VCR
Sony
Dream System
or
Satellite Receiver
Cables Required
Splitter 1
Coaxial 5
Composite 2
Video 1
Digital Optical 1
Audio
If you are not using a cable box or
satellite receiver, connect the
cable to the VCR’s RF IN jack.
*Cable box may not be required if using CableCARD.
See the Operating Instructions for details.
*Cable box may not be required if using CableCARD.
See the Operating Instructions for details.
Rear of TV
RGB
PC IN 8
AUDIO
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1345
IN OUT
CONTROLS
HD/DVD IN
(1080i/720p/480p/480i)
IN
67
AUDIO IN
RL
VHF/UHF
CABLE
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
S400
i.LINK
(DV/HDV/MICROMV/TS)
L
R
(MONO)
AUDIO
L
R
L
R
AUDIO
VIDEO
S VIDEO
Y
P
P
B
R
DVD Player
PC
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
Splitter
Cable Terrestrial
Antenna
Rear of TV
RGB
PC IN 8
AUDI O
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1345
IN OUT
CONTROLS
HD/DVD IN
(1080i/720p/480p/480i)
IN
67
AUDIO IN
RL
VHF/UHF
CABLE
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
L
R
(MONO)
AUDIO
L
R
L
R
AUDIO
V IDEO
S VIDEO
Y
P
P
B
R
S400
i.LINK
(DV/HDV/MICROMV/TS)
Splitter
Cable
R
L
LINE IN
VIDEO
A/V
TVVCRDVD
IN
OUT
DVD Player
IN
OUT
IN
OUT
Digital
Recorder
HD Cable Box* or
HD Satellite Receiver
OUT
IN
SAT IN
R
L
Terrestrial
Antenna
Rear of TV
RGB
PC IN 8
AUDI O
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1345
IN OUT
CONTROLS
HD/DVD IN
(1080i/720p/480p/480i)
IN
67
AUDIO IN
RL
VHF/UHF
CABLE
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
L
R
(MONO)
AUDIO
L
R
L
R
AUDIO
VIDEO
S VIDEO
Y
P
P
B
R
S400
i.LINK
(DV/HDV/MICROMV/TS)
DVD Player
LINE IN
OUT
IN
LINE OUT
AUDIO VIDEO
VCR
RL
HD Cable Box* or
HD Satellite Receiver or
HD DVR
OUT
IN SAT IN
COMPONENT
VIDEO OUTPUT
Y
P
B
P R
VCR AUDI O
OUT
Cable
Terrestrial
Antenna
For best results, check the cable box’s
manual for proper setup of the HD
output.
If your DVD player has an HDMI jack,
use that instead of the video
connections shown here.