Sony Trinitron KV-ES34 User manual

Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
TrinitronColor TV
© 1999 Sony Corporation
KV-ES34
KV-ES29
3-867-756-22 (1)
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
M91
M81
M80
M31
01/00-01_ES34M91.11GB 31/07/02, 10:47 AM1

2
Sony KV-ES34 Group A2 (GB)_3-867-756-21 (1)
WARNING
• Dangerously high voltages are present inside the TV.
• Operate the TV only between 110 – 240 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel. Do not install the TV in hot, humid or excessively
dusty places.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
Install the TV in a stable position. Do not allow
children to climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
Pull the power cord out by the plug. Do not pull
the power cord itself. Disconnect the TV if you
are not going to use it for several days.
02/02-02_ES34M91.11GB 31/07/02, 9:50 AM2

3
Sony KV-ES34 Group A2 (GB)_3-867-756-21 (1)
Using Your New TV
Table of Contents
WARNING
Using Your New TV
Getting Started ............................................................................................. 4
Step 1: Connect the antenna .................................................................. 4
Step 2: Insert the batteries into the remote .......................................... 5
Step 3: Preset the channels automatically ........................................... 5
Connecting optional components ............................................................. 6
Securing the TV ............................................................................................ 9
Watching the TV ........................................................................................ 10
Advanced Operations
Selecting the picture and sound
modes .................................................. 14
Viewing higher quality pictures ...... 15
Viewing your favorite channels ....... 16
Watching two programs at the same
time ...................................................... 17
Displaying multiple programs ........ 19
Listening with surround sound ....... 22
Enjoying stereo or bilingual
programs (KV-ES34M91/ES34M31/
ES29M31 only) .................................... 23
Viewing Teletext (KV-ES34M91/
ES34M81/ES34M31/ES29M81/
ES29M31 only) .................................... 25
Operating optional components ...... 27
Adjusting Your Setup (MENU)
Introducing the menu system .......... 29
Changing the “A/V CONTROL”
setting ............................................ 32
Changing the “MULTI PICTURE”
setting ............................................ 35
Changing the “FEATURE”setting .. 37
Changing the “SET UP” setting .. 39
Changing the “CH PRESET”
setting ........................................... 42
Additional Information
Self-diagnosis function ...................... 45
Troubleshooting ................................. 46
Identifying parts and controls ......... 50
Specifications ...................... Back cover
The features you will enjoy include:
• “DRC-MF” for viewing higher quality
pictures (page 15)
• “FAVORITE CH” for quick and easy
program selection (page 16)
• “PIP” & “TWIN” for viewing two
programs (page 17)
• “PROGRAM INDEX“ for displaying
multiple programs (page 19)
• “PICTURE MODE”/“SOUND MODE”/
“SURROUND” for customizing your TV
(pages 14 and 22)
• “WIDE MODE” to view 16:9 pictures (page 38)
Your TV also offers the following features:
• Menu language options
— English/Chinese/Arabic (page 12)
• “CHILD LOCK” for locking out specific
channels (page 40)
• “INTELLIGENT VOL” for automatic
volume adjustment (page 39)
• “FINE” tuning feature (page 44)
• Button Joystick on the remote control
for easier operation (page 12)
• “ECO MODE” to save energy (page 38)
• “GAME MODE” for video games (page 38)
GB
03/03-03_ES34M91.11GB 31/07/02, 9:52 AM3

4Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
Connecting a VCR
To play a video tape, press t(see page 11).
Using Your New TV
: Signal flow
IEC connector
(not supplied)
or
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
To video and
audio outputs
To S video
output
Audio/Video cable
(not supplied)
S video cable
(not supplied)
: Signal flow
To
(S video input) VCR
Antenna cable (not supplied)
To antenna
output
To (antenna)
R
L
23
Y
CB
CR
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
R
L
(MONO)
DIGITAL IN
(DOLBY DIGITAL/PCM)
1
Rear of TV
To t1, 2 or 3 (video input)
(yellow)
-L (MONO) (white)
-R (red)
04/04-09_ES34M91.11GB 31/07/02, 9:52 AM4

5
Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Using Your New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to (the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8(antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When both the (S video input) and t1 (video input) are connected,
the (S video input) is automatically selected. To view the video input
to t1 (video input), disconnect the S video cable.
Step 2
Insert the batteries into
the remote
Notes
• Do not use old batteries or different types of batteries together.
• To operate some of the functions of your TV, you may have to open the
remote control cover.
Step 3
Preset the channels automatically
Notes
• To stop the automatic channel presetting, press MENU twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 43).
• To open the side panel of your TV, push on it until you hear a click, then it
will open.
2
AUTO
PROGR
L
≥
R
2
…4
AUTO
PROGR
1
AUTO PROGRAM
01
TV SYS : AUTO
VHF LOW
PR:
U
U
g
(MONO)
1
AUTO
PROGR
L
≥
R
2
…4
(MONO)
PUSH
PUSH
b
b
b
Side panel
04/04-09_ES34M91.11GB 31/07/02, 9:52 AM5

6Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game, or stereo system. To watch and operate the connected
equipment, see pages 11 and 27.
Connecting a camcorder/video game equipment
using the t(video input) jacks
Notes
• When connecting video game equipment, display the “FEATURE” menu
and select “ON” for “GAME MODE” to adjust the picture setting that is
suitable for video games (see page 38).
• You can also connect video equipment to the t1, 2, or 3 (video input)
jacks at the rear of your TV.
• When both the (S video input) and t4 (video input) are connected,
the (S video input) is automatically selected. To view the video input
to t4 (video input), disconnect the S video cable.
Connecting audio/video equipment using the T
(monitor output) jacks
Note
• If you select “DVD” on your TV screen, no signal will be output at the
T (monitor output) jacks (see page 11).
: Signal flow
To S video output
Side panel
Camcorder
Video game equipment
To video and
audio outputs
To
(S video input)
To …4
(video input)
or
Audio/Video cable
(not supplied)
S video cable
(not supplied)
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
To video and
audio inputs
or
Audio system
To
audio
inputs
VCR
: Signal flow
To T
(monitor
output)
Antenna cable (not supplied)
Audio cable
(not supplied)
Audio/Video cable (not supplied)
AUTO
PROGR
L
≥
R
2
…4
(MONO)
RR
L
L
(MONO)
123
Y
C
B
C R
DIGITAL IN
(DOLBY DIGITAL/PCM)
04/04-09_ES34M91.11GB 31/07/02, 9:53 AM6

7
Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Using Your New TV
Connect To (on the DVD player)
Y (green) Y
CB(blue) Cb, B-Y or PB
CR(red) Cr, R-Y or PR
Connecting a DVD player to (component video input)
1 Using an audio cable, connect R and L under (component video input) on your
TV to the LINE OUT, AUDIO R and L output connectors on your DVD player.
2 Using a coaxial digital connecting cord, connect DIGITAL IN under (component
video input) on your TV to the DIGITAL OUT, COAXIAL output connector on your
DVD player.
3 Using a component video cable, connect Y, CB, and CRunder (component video
input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CRoutput
connectors on your DVD player.
4 Press ton the remote or the TV until “DVD” appears on the screen.
To component
video output
Component video cable
(not supplied)
DVD
player
To L (white)
R (red)
To audio
output
Audio cable (not supplied)
: Signal flow
To
(component video input)
To coaxial
digital
output
Coaxial digital
connecting
cord (not
supplied)
To DIGITAL IN
(digital input)
VIDEO COAXIAL OPTICAL
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C B C R
DIGITAL OUT R
DIGITAL IN
(DOLBY DIGITAL/PCM)
L
Y
C
B
C R
continued
Notes
• Some DVD player terminals may be labeled differently:
• When connecting to (component video input) on your TV, you must
connect Y, CB, and CR to receive the video signals, and at least connect
DIGITAL IN to receive digital audio signals or connect L and R to receive
analog audio signals (see page 34).
• When making connections to DIGITAL IN under (component video
input) on your TV, always set “DIGITAL IN: OFF” in the “A/V
CONTROL” menu. After completing all connections, then set “DIGITAL
IN: ON”. If you set “DIGITAL IN: ON” while still making connections to
DIGITAL IN (component video input), a loud noise may suddenly
come out from the speakers, affecting your hearing and causing damage
to the speakers (see page 34).
04/04-09_ES34M91.11GB 31/07/02, 9:53 AM7

8Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
VIDEO
R-AUDIO-L
LINE OUT
R
L
(MONO)
123
Connecting a DVD player to t(video input)
Connect t1, 2, or 3 (video input) /(audio/video) connectors on your TV to
LINE OUT on your DVD player.
To audio/video
output
(yellow)
-L (MONO) (white)
-R (red)
To t1, 2, or 3
(video input)
: Signal flow
Audio/Video cable
(not supplied)
Connecting optional components (continued)
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
under “PERSONAL ADJUST” in the “PICTURE MODE” menu (see
page 33).
• Connect your DVD player directly to your TV. Connecting the DVD
player through other video equipment will cause unwanted picture noise.
04/04-09_ES34M91.11GB 31/07/02, 9:53 AM8

9
Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Using Your New TV
20 mm
AB
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
AWith the supplied screws, attach the stabilizer band to the TV stand and to
the rear of the TV using the provided hole.
OR
BPass a cord or chain through the clamps and secure them to the rear of the
TV and a wall or pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
OR
3.8 mm
04/04-09_ES34M91.11GB 31/07/02, 9:53 AM9

10 Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Number buttons
PROGR +/–
Watching the TV
This section explains various functions
and operations used while watching the
TV. Most operations can be done using
the remote.
or
123
456
78
09
MENU PROGR
ENTER
JUMP
A/B
DRC-MF
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
U
– PROGR +
ENTERMENU –
+
…
U
123
456
78
09
JUMP
PROGR
1Press !to turn on the TV.
When the TV is in standby
mode (the 1indicator on
the TV is lit red), press 1/1
on the remote or on the TV.
2Press PROGR +/– or the
number buttons to select
the TV channel.
For double digit numbers,
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
Note
• When you turn on the TV, either the program number or video mode is
displayed for approximately 40 seconds. The ECO MODE ( ) icon will
also appear if “ECO MODE” in the “FEATURE” menu is set “ON” (see
page 38).
To select a TV program quickly
(1) Press and hold PROGR +/–.
(2) Release PROGR +/– when the desired program number appears.
Note
• When you select a TV program quickly, the picture may be disrupted.
This does not indicate a malfunction.
1indicator
05/10-13_ES34M91.11GB 31/07/02, 9:54 AM10

11
Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Using Your New TV
To
Turn off temporarily
Turn off completely
Adjust the volume
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
Jump back to the previous channel
Display the on-screen information*
Press
1/1.
The 1indicator on the TV lights up red.
!on the TV.
2+/–.
%.
t(or ton the TV) to select “VIDEO 1”,
“VIDEO 2”, “VIDEO 3”, “VIDEO 4”or “DVD”.
To return to the TV screen, press a(or ton the TV).
JUMP.
.
Additional tasks
JUMP
+/–
MENU
TV
123
456
78
09
MENU PROGR
ENTER
PRESET
VTR 1 2 3 DVD
JUMP
A/B
DRC-MF
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
ENTER
continued
* Some picture/sound settings, and either the program number or video
mode are displayed. The on-screen display for the picture/sound settings
disappears after about 3 seconds.
TITLE
PROGR
+
DRC-MF
VIDEO
U
– PROGR +
ENTERMENU –
+
…
1indicator
05/10-13_ES34M91.11GB 31/07/02, 9:54 AM11

12 Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Using the Remote Control Button Joystick ( )
You can select the menu item on the
screen by moving up, down, left or
right (see page 31).
To confirm a selected item, press .
You can also press ENTER on the remote
to confirm a selected item.
Changing the menu language
You can change the menu language as well as the on-screen language. For details on
how to use the menu, see “Introducing the menu system” on page 29.
1Press MENU.
2Move up or down to
select , then press .
3Make sure “LANGUAGE”
is selected then press .
4Move up or down to
select the desired
language (e.g., “ ”),
then press .
The selected menu
language appears.
To return to the normal screen
Press MENU.
A/V CONTROL
DRC-MF: DRC1250
SURROUND: OFF
DIGITAL IN : OFF
PICTURE MODE: DYNAMIC
SOUND MODE: DYNAMIC
SET UP:ENGL I SH
CHILD LOCK:PR01 OFF
FF
PIC ROTATION
FAVORI TE CH
INTELLIGENT VOL:O
LANGUAGE
To move
To confirm
78
09
MENU PROGR
ENTER
PRESET
VTR 1 2 3 DVD
JUMP
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
MENU
b
bb
bb
b
Watching the TV (continued)
SET UP :ENGL I SH
CH I LD LOCK
PIC ROTATI
FAVORI TE C
INTELLIGEN
LANGUAGE/
05/10-13_ES34M91.11GB 31/07/02, 9:54 AM12

13
Using Your New TV
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Using Your New TV
Setting the Wake Up timer
1Press until the desired
period of time appears.
The Wake Up timer starts
immediately after you
have set it.
2Select the TV channel or video mode you want to wake up to.
3Press 1/1, or set the Sleep timer if you want the TV to turn off
automatically.
The indicator on the TV lights up orange.
To cancel the Wake Up timer
Press until “WAKE UP TIMER: OFF” appears, or turn off the TV’s
main power.
Note
• If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into
standby mode. To resume watching the TV, press any button or control on
the TV or the remote.
Setting the Sleep timer
Press until the desired
period of time appears.
The Sleep timer starts
immediately after you
have set it.
To cancel the Sleep timer
Press until “SLEEP TIMER: OFF” appears, or turn the TV off.
WAKE UP TIMER:10M
WAKE UP TIMER:OFF WAKE UP TIMER:12H00M
After 10 minutes
No Wake Up Timer After 12 hours
SLEEP TIMER:30M SLEEP TIMER:60M
SLEEP TIMER:OFF SLEEP TIMER:90M
After 30 minutes
No Sleep Timer
After 60 minutes
After 90 minutes
05/10-13_ES34M91.11GB 31/07/02, 9:54 AM13

14 Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Advanced Operations
Selecting the picture mode
Press PIC MODE
repeatedly until the
desired picture mode is
selected.
Select
“DYNAMIC”
“STANDARD”
“HI-FINE”
“PERSONAL”
To
receive high contrast pictures.
receive normal pictures.
receive higher resolution pictures with mild contrast.
receive the last adjusted picture setting from the “ADJUST” option in the
“A/V CONTROL” menu (see page 33).
Selecting the sound mode
Press SOUND MODE
repeatedly until the
desired sound mode is
selected.
Select
“DYNAMIC”
“DRAMA”
“SOFT”
“PERSONAL”
To
listen to dynamic and clear sound that emphasizes both the low and high
tones.
listen to sound that emphasizes voice and high tones.
receive soft sound.
receive the last adjusted sound setting from the “ADJUST” option in the
“A/V CONTROL” menu (see page 33).
Tip
• You can also set the picture and sound modes using the menu (see
“Changing the “A/V CONTROL” setting” on page 32).
Selecting the picture
and sound modes
You can select picture and sound modes
and adjust the setting to your preference
in the “PERSONAL” option.
MENU PROGR
ENTER
PRESET
VTR 1 2 3 DVD
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
SOUND MODE
PIC MODE
PERSONAL
DYNAMIC
HI-FINE
STANDARD
PIC
MODE
≥DYNAMIC
≥PERSONAL ≥SOFT
≥DRAMA
SOUND
MODE
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM14

15
Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Viewing higher
quality pictures
— “DRC-MF”
The Digital Reality Creation-Multi
Function (DRC-MF) feature allows you
to enjoy higher quality pictures on your
TV. You can select “DRC1250” to watch
super real (higher resolution) pictures,
or “DRC100” to reduce flicker if
necessary.
Press DRC-MF repeatedly
until you receive the
desired picture quality.
Tip
• When the broadcast signal is weak, you may see some dots or noise on the
TV screen. To reduce this interference, display the “A/V CONTROL”
menu and select “ADJUST” in “PICTURE MODE”, then adjust “SHARP”
to reduce the sharpness (see page 33).
Note
• The DRC-MF mode is not selectable when using the “PROGRAM INDEX”
or “FAVORITE CH” feature, or when the “GAME MODE”, Picture-In-
Picture (“PIP”), or “TWIN” mode is turned “ON”.
The DRC-MF logo ( ) and “DRC-MF” are trademarks of
Sony Corporation.
Select
“DRC1250”
“DRC100”
To
select higher resolution pictures.
reduce flicker on the screen.
123
456
78
09
MENU PROGR
ENTER
JUMP
A/B
DRC-MF
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
DRC-MF
Advanced Operations
DRC-MF: DRC1250 DRC-MF: DRC100
DRC-MF
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM15

16 Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Viewing your
favorite channels
— “FAVORITE CH”
You can display seven favorite channels
for quick and easy selection.
The last seven channels selected with
the number buttons are displayed in
“AUTO” mode. You can set up your
own favorite channels in “MANUAL”
mode under the “FAVORITE CH” menu
(see “Changing the favorite channel
setting” on page 41).
Selecting a favorite channel
1Press FAVORITE.
2Move up, down, left
or right to select the
desired channel (e.g. PR
8), then press .
3Press again.
Note
• When you use your TV for the first time, seven preset channels appear.
FAVORITE
TV
78
09
MENU PROGR
ENTER
PRESET
VTR 1 2 3 DVD
JUMP
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
ENTER
1
3
4
12 10 8 6
FAVORITE
b
FAVORITE CH
FAVORITE CH
7.PR 12 6.PR 10 5.PR 08 4.PR 06
3.PR 04
2.PR 03
1.PR 01
8
1
3
4
12 10 8 6
FAVORITE CH
bb
b
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM16

17
Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Watching two
programs at the
same time
— “PIP”, “TWIN”
With the Picture-in-Picture (PIP) or
TWIN pictures features, you can display
a different TV program or video within
or beside the main picture.
Displaying the PIP screen
Press .
Displaying TWIN pictures
Press .
To return to the normal screen
Press (when in the PIP screen) or (when in the TWIN picture
screen).
Tip
• You can also display the PIP screen or TWIN pictures using the menu (see
“Changing the MULTI PICTURE setting” on page 35).
12
10 12
TITLE
PROGR
+
PROGR –
PROGR
MENU
ENTER
DRC-MF
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
PROGR +/PROGR –
/
VIDEO
continued
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM17

18 Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Additional PIP/TWIN pictures tasks
To
change a TV program in the PIP
screen or in the right TWIN picture
swap pictures between the main
and PIP screens
freeze the PIP screen
change the position of the PIP screen
swap the right and left pictures of
the TWIN pictures
change the screen size of the TWIN
pictures
Notes
• The button does not function in the TWIN pictures mode.
• When you display a video input on the PIP screen at a faster/slower
speed, the picture may be disrupted depending on the VCR type.
• If you display different color systems on the main screen and the PIP
screen, the size of the PIP screen may be different and the PIP picture may
be disrupted. This does not indicate a malfunction of the TV.
• In the TWIN picture screen, you can only operate and hear the sound of
the main left screen ( appears on the screen).
• When the button is pressed, the TV screen flickers or goes blank for
about one second before the TWIN pictures appear. This does not indicate
a malfunction of the TV.
Press/Move
Press PROGR + or PROGR –. For a video input,
press .
Press .
Press .
To unfreeze the screen, press the button again.
Press D.
Press .
Move left to increase the left screen size.
Move right to increase the right screen size.
Watching two programs at the same time (continued)
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM18

19
Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Displaying
multiple
programs
— “PROGRAM INDEX”
The PROGRAM INDEX feature displays
all of the preset TV programs on twelve
or seven sub screens for direct selection.
Press PROGR INDEX.
The first twelve preset
programs appear one by
one, clockwise from the
upper left corner.
When the number of the
preset TV programs is less
than eight, the first seven
preset programs appear
one by one, clockwise from
the upper right corner.
Tip
• When you press the PROGR INDEX button in the TWIN pictures mode,
the left picture appears as the main screen of the PROGRAM INDEX
mode.
PROGR INDEX
b
PROGR +/–
Main screen
Main screen
Sub screens
Sub
screens
16
1234
12 5
11 6
10987
16
1
2
3
7654
TV
123
456
78
09
MENU PROGR
ENTER
PRESET
VTR 1 2 3 DVD
JUMP
FAVORITE PROGR
INDEX
PIC
MODE SOUND MODE SURROUND
PROGR
INDEX
continued
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM19

20 Advanced Operations
Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)
Displaying multiple programs (continued)
To view the next or the previous twelve preset programs
This works only when the number of the preset TV programs is
more than twelve.
Press PROGR +/– on the remote or the TV.
To select the desired program directly from the sub screens
1 Move up, down, left or right to move the frame to the screen
of the program you want to watch.
2 Press .
3 Press again.
Tip
• Pressing the number buttons directly displays the program.
16
1234
12 5
11 6
10987
16
13 14 15 16
17
18
8
1234
12 5
11 6
10987
b
8
b
16
1234
12 5
11 6
10987
b
06/14-21_ES34M91.11GB 31/07/02, 10:00 AM20