Sony Trinitron KV-SA32 User manual

Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
M36
© 2004 Sony Corporation
KV-SA32
KV-SA28
2-348-392-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
01GB01COV-STMOce.p65 10/14/04, 6:06 PM1
Black

2
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
WARNING
•Dangerously high voltages are present inside the TV.
•TV operating voltage: 220 –240 V AC.
•Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
•To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may be
subject to excessive dust, heat, moisture or
vibrations.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto it.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not attach anything (e.g.,
adhesive tape, cellophane tape, glue) on the painted
cabinet of the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
01GB02WAR-STMOce.p65 10/14/04, 6:06 PM2
Black

3
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned off,
it is still connected to the AC power source (mains)
as long as the power cord is plugged in. Unplug
the TV before moving it or if you are not going to
use it for several days.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
01GB02WAR-STMOce.p65 10/14/04, 6:06 PM3
Black

4
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xSecuring the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
(1) Attach each end of a cord or chain to
the provided holders at the rear of
your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
Note
•Use only the supplied screws. Use of other screws may damage the TV.
or
or
01GB02WAR-STMOce.p65 10/14/04, 6:06 PM4
Black

5
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Overview of Controls
TV front and rear panels ..................... 9
Using the remote control and
basic functions .................................... 10
Advanced Operations
Selecting the picture and sound
modes .................................................. 12
Using the wide screen mode ............ 13
Enjoying the WEGA Theatre Mode
with center speaker ........................... 15
Watching Picture-in-Picture (PIP) ... 16
Enjoying stereo or bilingual
programs ............................................. 17
Viewing Teletext ................................. 18
Operating optional components ...... 19
Menu Adjustment
Introducing the menu system .......... 20
Changing the “Picture”setting ........ 23
Changing the “Sound”setting ......... 25
Changing the “Wide Screen”
setting .................................................. 27
Changing the Picture-in-Picture
(“PIP”) setting .................................... 28
Changing the “Channel Setup”
setting ................................................. 29
Changing the “Setup”setting .......... 31
Additional Information
Connecting optional components ... 33
Troubleshooting ................................. 36
Specifications ...................... Back cover
GB
01GB03TOC-STMOce.p65 10/14/04, 6:06 PM5
Black

6Installation
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Installation
xGetting Started
b
b
1
Step 1
Insert the batteries (supplied) into the remote.
Note
•Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
Plug in the power cord, then press !on the TV to
turn it on.
Note
•The 1(standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
•You can also connect your TV to other optional components
(see page 33).
01GB04INS-STMOce.p65 10/14/04, 6:07 PM6
Black

7
Installation
Installation
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
x Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup”menu will appear.
You may change the menu language, preset the TV channels automatically, change the
order of TV channels that appear on the screen and adjust the picture position using
the buttons on the TV front panel.
Tip
•The MENU, and V/v/B/b buttons on the remote control can also be used for the
operations below.
1Press 2+/– to select the desired menu
language, then press t.
The selected menu language appears.
2Press 2+/– to select “Yes”, then press t
to preset the channels automatically.
The screen will indicate automatic
presetting in progress.
After all available channels have been tuned
and stored, the “Program Sorting”menu
appears automatically on the screen.
To skip automatic channel presetting, select
“No”, then press t.
If the message “No channel found. Please
connect cable/antenna”appears, check your
TV connections, then press t.
3The “Program Sorting” menu enables you
to change the order in which the channels
appear on the screen.
a) If you wish to keep the channels in the
tuned order, press MENU.
b) If you wish to store the channels in a
different order:
1) Press 2 +/– to select the program
number with the channel you wish to
rearrange, then press t.
AP
Program Sorting
Program:
01
02
03
04
Select channel
Program:
TV System: Auto
01
VHF Low
continue
01GB04INS-STMOce.p65 10/14/04, 6:07 PM7
Black

8Installation
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
The selected channel will appear on
the screen.
2) Press 2+/–to select the new
program number position for your
selected channel, then press t.
3) Repeat steps b) 1) and 2) if you wish
to change the order of the other
channels.
c) Press MENU to go to the next menu.
4Press 2+/– to adjust the bars on the top
and bottom of the menu if they are
slanted, then press t.
“Picture V-Position”menu appears.
5If the upper and lower bars are not
equally positioned to the top and
bottom of the screen, press 2+/– to
adjust them, then press t.
If no adjustment is necessary, then press t.
6Press 2+/– to select “No”, then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
“Yes”, then press t.
Tips
•You can immediately go to the end of the ”Initial Setup”menu by pressing MENU.
•You can also set up your TV using the menu system (see page 20).
•You can also preset the channels automatically by pressing MENU (AUTO PROG) button on
the TV front panel for about five seconds.
01
Program Sorting
Program:
01
02
03
04
Select new position
continued
01GB04INS-STMOce.p65 10/14/04, 6:07 PM8
Black

9
Overview of Controls
Overview of Controls
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Overview of Controls
4
L(MONO) R
PROG
MENU
(AUTOPROG)
SOUND
MODE
AUTOPROG:Press[MENU]for5sec
32
09
PROG
MENU
(AUTO PROG)
SOUND
MODE
4
58 76
AUTO PROG:Press [MENU] for 5sec
1
qa
123
RLY
CBCR
qf
qd qs
qg
4
L(MONO) R
120W MAX 8
c –
TV front panel
TV rear panel
xTV front and rear panels
Button/Terminal Function Page
1!Turn off or turn on the TV. 6
21Standby indicator. 6
2Wake Up indicator. 11
3Remote control sensor. –
4PROG +/– Select program number. –
52+/– Adjust volume. –
6tSelect TV or video input. 33
Menu operations
52+/– Select and adjust items. –
6tConfirm selected items. –
7MENU Display or cancel the menu. –
7(AUTO PROG) Preset channels automatically. 8
8SOUND MODE Select sound mode options. 12
5-Band Graphic Equalizer display will appear.
9t4 Video input terminal 4. 33
0iHeadphone jack. –
qa Component video input terminal. 34
qs TMonitor output terminal. 33
qd t1, t2, t3 Video input terminal 1, 2, 3. 33
qf 8Antenna input terminal. 33
qg Center speaker input terminal. 35
01GB04INS-STMOce.p65 10/14/04, 6:07 PM9
Black

10 Overview of Controls
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xUsing the remote control and basic
functions
123
46
789
0
5
DVD
MENU
TV
PROG
VIDEO
wg
wd
wf
wk
wj
9
1
4
5
qh
qg
qa
8
7
6
ql
qs
w;
q;
qj
A/B
wl
e;
ea
es
OPTION RESET
qk
qf
qd
wa
ws
wh
CENTER
SP WEGA THEATRE
2
3
Button Description Page
1?/1Turn off temporarily or turn –
on the TV.
3aDisplay the TV program. –
4tSelect video input. 33
5WEGA THEATRE Select WEGA Thearte Mode. 15
6CENTER SP Select TV’s center speaker mode. 15
qa Change the picture size. 14
qd Select surround mode options: –
“TruSurround”(surround sound
that spreads out to the rear of a
room), “WOW”(full, deep bass
sound), “Simulated”(stereo-like
monaural sound), “Off”.
qf Jump to last program number –
that has been watched for at
least five seconds.
qg PROG +/– Select program number. –
qk Mute the sound. –
ql Display on-screen information. –
w; DVD Select component video input. 34
wj Select sound mode options. 12
5-Band Graphic Equalizer
display will appear.
wk Select picture mode options. 12
wl 0 – 9, -Input numbers. –
e; 2+/– Adjust volume. –
es RESET Set TV to factory setting. 36
Menu operations
8MENU Display or cancel the menu. 22
wg V, v, B, b Select and adjust items. 22
wh Confirm selected items. 22
Stereo/bilingual operations
7A/B Select stereo/bilingual mode. 17
Timer operations
qh Set TV to turn off automatically –
(Sleep Timer) according to the desired period
of time (max. of one hour and
30 min.).
01GB04INS-STMOce.p65 10/14/04, 6:07 PM10
Black

11
Overview of Controls
Overview of Controls
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW
and TruSurround technologies are incorporated under license from SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866.
“BBE”and BBE symbol are trademarks of BBE Sound, Inc.
Button Description Page
qj Set TV to turn on automatically according to the
–
desired period of time (max. of 12 hours).
The indicator on TV lights up amber once you
set the wake up timer.
If no buttons or controls are pressed for more than
one hour after the TV is turned on using the wake up
timer, the TV automatically goes into standby mode.
Teletext operations (green label)
4Stop Teletext from scrolling. 18
7Enlarge the Teletext display. 18
q; Display Teletext broadcast. 18
qs z(red, green, Access a FASTEXT menu. 18
yellow, blue)
qg , Display the next or previous page. 18
qh Show TV screen while waiting for Teletext page. 18
qj Display Teletext service contents. 18
ql Reveal concealed information. 18
PIP operation (yellow label)
9PIP PROG +/ Display and change programs in the sub screen. 16
PIP PROG –
wa Adjust position of sub screen. 16
ws Swap main and sub screens. 16
wd Swap sound between main and sub screen. 16
wf Display a sub screen. 16
wh Change sub screen to main screen. 16
Optional components operations
2VIDEO ?/1Power. 19
qk Mute the sound. 19
wg >Fast forward/Step forward. 19
wg .Rewind/Step backward. 19
wg xStop. 19
wg XPause. 19
wh NPlay. 19
e; 2 +/–Adjust volume. 19
ea OPTION Operate optional components. 19
(Wake Up Timer)
01GB04INS-STMOce.p65 10/14/04, 6:07 PM11
Black

12 Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Advanced Operations
Selecting the sound mode
Press (or SOUND MODE on the front panel) to select the desired sound mode.
5-Band Graphic Equalizer display will appear.
Select To listen to
“Dynamic”dynamic and clear sound that emphasizes both the low
and high tones.
“Drama”sound that emphasizes voice and high tones.
“Soft”soft, natural and relaxing sounds.
“Personal”the last adjusted sound setting from the
“Sound Adjustment”option in the menu (see page 26).
xSelecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Personal”option.
Selecting the picture mode
Press to select the desired picture mode.
Select To view
“Dynamic”high contrast pictures.
“Standard”normal pictures.
“Soft”mild pictures.
“Personal”the last adjusted picture setting
from the “Picture Adjustment”
option in the menu (see page 24).
Dynamic
100 300 1k 3k 8k
100 300 1k 3k 8k
Drama
100 300 1k 3k 8k
Soft
100 300 1k 3k 8k
Personal
123
46
789
0
5
DVD
MENU
VIDEO
A/B
CENTER
SP WEGA THEATRE
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM12
Black

13
Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xUsing the wide screen mode
The wide screen mode feature allows you to watch the picture filling the 16:9
screen of the TV.
Watching the picture in wide screen mode automatically –
Auto Wide
The TV automatically selects optimum wide screen mode according to the signal
input and displays the picture to fill the 16:9 screen.
The examples in the table below show the settings preset at the factory; “Auto Wide”
is set to “On”and “4:3 Default”is set to “Wide Zoom”in the “Wide Screen”menu
(see page 27).
* When a normal 4:3 picture is received, “Wide Zoom”mode is automatically selected with the
factory setting. You can display picture as it is without enlarging it (“Normal”mode) if you set
“4:3 Default”in the “Wide Screen”menu to “Normal”(see page 27).
Note
•The Auto Wide feature may not work correctly depending on the quality of signal. In this case,
select the wide screen mode manually using the button (see page 14).
When receiving … Auto Wide The picture changes to
functions to select …
normal 4:3
aspect ratio
picture with
or without an
ID-1 or WSS
signal.
letter box
picture with an
ID-1 or WSS
signal.
squeezed
picture with
an ID-1 or WSS
signal.
Black bands may appear on the
top and bottom of the screen.
Wide
Zoom*
Zoom
Full
continue
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM13
Black

14 Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Watching the picture in wide screen mode manually
Press repeatedly until the mode indication you want is displayed on the screen.
Notes
•You can also select the wide screen mode manually using the menu (see page 27).
•When the wide screen mode is selected by pressing the button on the remote or using the
menu, the Auto Wide feature does not work temporarily.
The Auto Wide feature functions again when:
–you change a TV channel.
–you change the video input.
–the TV is turned off and on again.
–the signal format is changed.
continued
Wide Zoom Normal
Zoom Full
123
46
789
0
5
TV
PROG
OPTION RESET
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM14
Black

15
Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xEnjoying the WEGA Theatre Mode
with center speaker
The WEGA Theatre Mode enables you to enjoy the best picture, sound and
surround effect of a cinema from a DVD source. You can use your TV speaker as
the center speaker of your audio system for optimum vocal enhancement and
control its sound volume from the remote of the TV.
Setting up WEGA Theatre Mode
1. Connect the center speaker terminals of the amplifier to the center speaker
input terminal on the TV (see page 35).
2. Select the proper video input from “WEGA Theatre Setup”menu and turn on
the connected equipment (see page 31).
3. Set up the remote to work with the connected equipment (see page 19).
To Press
switch to WEGA WEGA THEATRE.
Theatre Mode Be sure to aim the remote control
at the TV set and connected
equipment for about one second
after the button is pressed.
The connected equipment turns
on automatically from standby
mode and will start playing.
The “Picture Mode”and “Sound
Mode”will switch automatically
to “Personal”and you can adjust
the setting to your personal
preference (see pages 24 and 26).
switch to center CENTER SP repeatedly until
speaker mode “CENTER IN Speaker”appears.
To return to normal speaker
mode, press the button repeatedly
until “MAIN Speaker”appears.
adjust center 2 +/–
speaker volume
Notes
•Be sure to place your TV and connected equipment adjacent to each other so that you can
control both the TV and the connected equipment by using the TV’s remote control at the
same time (see page 19).
•The WEGA Theatre and center speaker modes are automatically cancelled when you change
the program number, video input or turn the TV off and on again.
•When the TV is in the center speaker mode, you cannot use the PIP feature, change the
surround sound and the “Intelligent Volume”mode.
•Some equipment might not respond properly when WEGA THEATRE button is pressed. In
this case, use the equipment’s own remote control.
123
46
789
0
5
DVD
MENU
TV
PROG
VIDEO
A/B
OPTION RESET
CENTER
SP WEGA THEATRE
CENTER SP
2 +/–
WEGA THEATRE
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM15
Black

16 Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xWatching Picture-in-Picture (PIP)
With the PIP feature, you can display two different TV
programs or video input at the same time by using the
button.
To
Display a sub screen
Change a program number
in the sub screen
Adjust position of sub screen
Swap pictures between
the main and sub screens
Swap sound between the
main and sub screens
A “ ” symbol will appear
next to the program
number or video input
display to indicate which
screen you are hearing.
Selecting TV program using PIP
You can select your desired TV program directly from the PIP sub screen by using PIP
PROG +/–buttons.
1. Press PIP PROG +/–until the desired program appears in the sub screen.
2. Press to change the sub screen program to the main screen.
Notes
•The PIP feature is not available when the TV is in the center speaker mode (page 15) and you
cannot set the TV to the center speaker mode while viewing the PIP.
•You can only enjoy stereo sound from the main screen.
•You cannot change the picture to a video input in the sub screen. You can only display a video
input, in the sub screen by swapping the pictures when a video input is displayed in the main
screen.
•The picture and sound from the T (monitor output) terminals will always be from the main
screen, even when you select the sub screen sound by pressing (see page 33).
PIP PROG +/
PIP PROG –
Press
.
To cancel the sub screen, press
the button again.
PIP PROG + or
PIP PROG –.
.
.
.
123
46
789
0
5
DVD
MENU
VIDEO
A/B
CENTER
SP WEGA THEATRE
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM16
Black

17
Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
When receiving a NICAM program
Broadcasting On-screen display (Selected sound)
NICAM
stereo
NICAM
bilingual
NICAM
monaural
When receiving an A2 program
Broadcasting On-screen display (Selected sound)
A2
stereo
A2
bilingual
NICAM
(Stereo sound)
Mono
(Regular sound)
t
t
NICAM Main
(Main sound)
NICAM Sub
(Sub sound)
Mono
(Regular sound)
tt
t
Mono
(Regular sound)
Stereo
(Stereo sound)
t
t
Main
(Main sound)
Sub
(Sub sound)
t
t
NICAM Main
(Main sound)
Mono
(Regular sound)
t
t
x Enjoying stereo or bilingual programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
Note
•If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound
becomes monaural but the noise is reduced.
123
46
789
0
5
DVD
MENU
TV
PROG
VIDEO
A/B
OPTION RESET
CENTER
SP WEGA THEATRE
A/B
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM17
Black

18 Menu Adjustment
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xViewing Teletext
Some TV stations broadcast an information service called Teletext which allows
you to receive various information, such as stock market reports and news.
You can use the buttons on the remote to view Teletext.
To Do this
display a Teletext Press . Each time you press , the
page on the screen changes as follows:
TV picture Teletext tTeletext and TV tTV.
If there is no Teletext broadcast, “100”is
displayed at the top left corner of the
screen.
check the contents Press .
of a Teletext service An overview of the Teletext contents,
including page numbers, appears on the
screen.
select a Teletext page Press the number buttons to enter the
three-digit page number of the desired
Teletext page. If you make a mistake,
reenter the correct page number. To
access the next or previous page, press
or .
hold (pause) a Press to display the symbol “ ” at
Teletext display the top left corner of the screen. To
resume normal Teletext viewing, press
.
reveal concealed Press .
information (e.g., To conceal the information, press the
an answer to a quiz) button again.
enlarge the Teletext Press . Each time you press , the
display Teletext display changes as follows:
Enlarge upper half tEnlarge lower
half tNormal size.
stand by for a Teletext (1) Enter the Teletext page number that
page while watching you want to refer to, then press .
a TV program (2) When the page number is displayed,
press to show the text.
select a FASTEXT Press z(red, green, yellow and blue)
menu or the colored that corresponds to the desired menu or
boxes page number.
turn off Teletext Press a.
Note
•The FASTEXT feature can be used only when the FASTEXT broadcast is available.
Advanced Operations
z (red,
green,
yellow,
blue)
123
46
789
0
5
DVD
MENU
TV
PROG
VIDEO
A/B
OPTION RESET
CENTER
SP WEGA THEATRE
,
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM18
Black

19
Advanced Operations
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
xOperating optional components
You can use the supplied remote to operate Sony audio/video equipment.
Setting up the remote to work with other connected equipment
While keeping VIDEO ?/1 For example, to operate a
pressed, press the corresponding Sony 8 mm VCR:
number button for the desired
equipment (see the chart
below).
To control Hold down VIDEO ?/1 and press
Audio System 1, 1x, 2 or 3 0, 1, 2, or 3
DVD 1, 2 or 3 4, 5 or 6
VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9
+
VIDEO
8
To Press
turn on/off VIDEO ?/1
play Nwhile keeping OPTION pressed.
stop xwhile keeping OPTION pressed.
fast forward/ step forward or rewind/ >or .while keeping OPTION
step backward pressed.
pause Xwhile keeping OPTION pressed.
Press again to resume normal playback.
mute the sound while keeping OPTION pressed.
(Audio System 1, 1x, 2 or 3 only)
adjust volume 2 +/–while keeping OPTION pressed.
(Audio System 1, 1x, 2 or 3 only)
Operating audio/video equipment
Press VIDEO ?/1 or while keeping OPTION pressed, press N, x , ., > ,
X , or 2 +/– (see the chart below).
Notes
•If the equipment does not have a certain function, the corresponding button on the remote
will not operate.
•Some equipment might not respond properly to buttons on TV’s remote. In this case, use the
equipment’s own remote control.
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM19
Black

20 Menu Adjustment
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Menu Adjustment
xIntroducing the menu system
The MENU button lets you open a menu and change the settings of your TV.
The following is an overview of the menu system.
Return icon
Setup icon
Channel Setup icon
PIP icon
Name of the current
menu
Picture icon
Menu level 3
Menu level 2
User Guidance
Menu level 1
Level 1
“Picture”
“Sound”
Level 2
“Mode”
“Picture Adjustment”
“Color Temperature”
“3D Intelligent
Picture”
“Mode”
“Sound Adjustment”
“Balance”
“Intelligent Volume”
“Surround”
Level 3/Function
Select the picture mode:
“Dynamic”t“Standard”t“Soft”t“Personal”
Adjust the “Personal”option:
“Picture”t“Brightness”t“Color”t
“Hue”t“Sharpness” t “Reset”
Adjust white color tint:
“Cool”t“Neutral”t“Warm”
Optimize picture quality:
“On”t“Off”
Select the sound mode:
“Dynamic”t“Drama”t“Soft”t“Personal”
Adjust sound frequency settings of “Personal”
option:
“Adjust”t“Reset”
Select to emphasize the left and right speakers.
Adjust volume automatically:
“On”t“Off”
Select the surround mode:
“TruSurround”t “WOW”t“Simulated” t
“Off”
Page
23
25
Confirm End
Setup
WEGA Theatre Setup
Video Label
Picture Position
Language:
Color System:
Select
Sound icon
Wide Screen icon
01GB05AVD-STMOce.p65 10/14/04, 6:07 PM20
Black