Band width 0~5.5 MHz ±0.7 dB
S/N ratio 56 dB or more
Differential gain 2 % or less
Differential phase 2˚ or less
Y/C delay 15 ns or less
K factor (2T pulse) 1 % or less
Digital Audio Performance
Sampling frequency 48 kHz (synchronized with video)
Quantization 20 bits / sample
Input A/D quantization 20 bits / sample
Output D/A quantization 18 bits / sample
Frequency response 20 Hz to 20 kHz + 0.5 dB/-1.0 dB
(0 dBu 1 kHz)
Dynamic range
100 dB or more (at 1kHz, emphasis ON)
Distortion
0.03% or less (at 1 kHz, emphasis ON)
Cross talk -80 dB or less (at 1 kHz, between
D/A channels)
Wow and Below measurable level
Headroom 20 dB (18dB)
Emphasis T1=50µs, T2=15µs
(ON / OFF selectable)
Input / output signals
SDI (Serial Digital Interface)
HD serial digital component embed
audio 4 channels
(non-compressed) SMPTE 259M
HD SDI input BNC x 1
HD SDI output BNC x 1
Camera (26-pin x 1)
Analog component input Y : 1.0 Vp-p, 75 Ω(sync negative)
R-Y/B-Y : 0.7 Vp-p, 75 Ω
Analog audio input -60/-20/+4 dBu selectable
High impedance, balanced
Reference sync output TRI SYNC
0.6 Vp-p, 75 Ω(sync negative)
Return video output Y: 1.0 Vp-p, 75 Ω(sync negative)
Video
Analog composite
reference input BNC x 1
1125/60 or 1125/59.94 TRI SYNC
0.6 Vp-p, 75 Ω(sync negative)
525/59.94 Black burst
0.286 Vp-p, 75 Ω(sync negative)
Analog HD component
output BNC x 3 Y/Pb/Pr : 0.1 Vp-p, 75 Ω
(sync negative)Superimpose
ON/OFF selectable
Analog composite output BNC x 1
1.0 Vp-p,75 Ω(syncnegative)
Superimpose ON/OFF selectable
Audio
Analog audio input XLR x 4
-60/-20/+4 dBu selectable
High impedance, balanced
Analog audio output XLR x 4 +4 dBu (0 dBu)
Low impedance, balanced
Headphone Stereo standard jack (x 1) -17 dBu
Earphone Stereo mini jack (x 1) -17 dBu
Time code input BNC x 1 0.5~18 Vp-p,
impedance 10 kΩ±10%
Time code output BNC x 1 1.0 Vp-p
(75 Ω), 2.2 Vp-p (10 kΩ)
General
Dimensions (W x H x D) 317 x 154 x 349 mm
Mass Approx. 7.8 kg
Power requirements DC 12+5.0/-1.0 V
Power consumption Max.52 W(Rec. mode, Confi.Off)
Operating temperature 0˚C to+40˚ C (+32˚F to +104˚F)
Storage temperature -20˚ C to+60˚ C (-4˚ F to +140˚ F)
Humidity 25 % to 85 % (relative humidity)
Tape Format and Transport
Recording format HDCAM
Tape width 12.65 mm (1/2 inches)
Tape speed 96.7 mm/s
Record/playback time Max.124 min with large cassette
(BCT-124 HDL) Max. 40 min with
small cassette (BCT-40 HDL)
Fast forward/rewind time Approx. 7 min with large cassette
(BCT-124 HDL) Approx. 2.5 min with
small cassette (BCT-40 HDL)
Fast forward/rewind speed Max. 24 times
Search speed Max. 8 times (2/5/8 selectable)
Servo lock time 4.5 s or less (from Standby On)
Load/unload time 6 s or less(with small cassette /
large cassette)
Battery BP-L60A
Recommended tapes HDCAM cassette
BCT-22 / 40 / 64 / 124 HDL
Digital Video Performance
Sampling frequency Y: 74.25 MHz
Pb/Pr:37.125 MHz
Quantization I/O interface 10 bits / sample
Bit reduction 8 bits / sample
Error correction Reed-Solomon code
Error concealment Adaptive three dimensional
Compression Co-efficient recording system
Channel coding S-NRZI PR-IV
Digital Input to Analog Component Output
(Playback on standard playback machine)
Bandwidth Y: 0.5~21.0 MHz ± 0.5 dB
Pb/Pr : 0.5~7.00 MHz ± 0.5 dB
S/N ratio 58 dB or more
K factor (2T pulse) 1 % or less
Analog Component Input to Analog Component Output
(Playback on standard playback machine)
A/D quantization 10 bits / sample
Bandwidth Y : 0.5~21.0 MHz ±1.0 dB
Pb/Pr : 0.5~7.00 MHz ±1.0 dB
S/N ratio 56 dB or more
K factor (2T pulse) 2 % or less
Analog Component Input to Analog Composite Output
(Playback on standard playback machine)
A/D quantization 10 bits / sample
HDW-250 Connector Panel