Sony FDR-AX700 User manual

Digital 4K Video Camera Recorder
FDR-AX700
SERVICE MANUAL (LEVEL 2)
1st Edition (Revised 2)
Conditions of Use:
(1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products
(hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service
agreement”). Using this information for any purpose other than the purpose described foregoing is forbidden.
(2) Only the Authorized Servicer’s officers, employees or subcontractors (including their officers and employees) whose duties justify
a need-to-know and who have agreed to hold confidential this information (collectively hereinafter the ”Permitted users”) are permitted
to access and use this information. To disclose or disseminate to any person other than the Permitted users is forbidden.
(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose
described in Section (1) above.
(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior
written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5)
Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:
[email protected]
(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date before using it.
利用条件:
①  本情報はソニー製品の修理その他貴社と締結した業務委託契約に基づくサービス業務（以下「本サービス業務」）の遂行の
 目的でのみご利用ください。かかる目的以外での利用を禁止します。
② 本情報は、本サービス業務の遂行に必要でかつソニーグループに対して直接もしくは間接的に機密保持義務を負う者のみ
 閲覧・利用が可能です。これらの者以外への開示／漏えいを禁止します。
③ サービス業務の終了その他本情報の利用終了後は、本情報を速やかに再生不可能な形で消去/廃棄してください。
④ 著作者の事前の書面による許可なく、本情報の全部または一部の複写、複製、転載、改変、翻訳、送信その他の処分することを
 禁止します。（但し、本サービス業務の遂行に必要な範囲で担当者に複写・配布することはこの限りではありません）
⑤ 本情報の漏えい、紛失、盗難、盗用等の不正使用を発見された方は直ちに、下記までご連絡ください。
[email protected]
⑥ 上記の他、貴社と締結した業務委託契約の条項が適用されます。
情報改訂:
本情報は、当社の裁量により、予告なく変更されることがあります。業務にて使用する場合、本情報が最新の情報であることを
確認のうえ、ご使用ください。
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

警告
このマニュアルは， サービス専用です。
お客様が， このマニュアルに記載された設置や保守， 点検， 修理などを行うと感電や火災，
人身事故につながることがあります。
危険をさけるため， サービストレーニングを受けた技術者のみご使用ください。
WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
FDR-AX700
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type rec-
ommended by the manufacturer.
When you dispose of the battery, you must obey the
law in the relative area or country.
ATTENTION
Il y a danger d’explosion s’il y a remplacement incor-
rect de la batterie. Remplacer uniquement avec
une batterie du même type ou d’un type équivalent
recommandé par le constructeur.
Lorsque vous mettez la batterie au rebut, vous devez
respecter la législation en vigueur dans le pays ou la
région où vous vous trouvez.
VORSICHT
Explosionsgefahr bei Verwendung falscher Batterien.
Batterien nur durch den vom Hersteller empfohlenen
oder einen gleichwertigen Typ ersetzen.
Wenn Sie die Batterie entsorgen, müssen Sie die
Gesetze der jeweiligen Region und des jeweiligen
Landes befolgen.
注意
指定以外の電池に交換すると，破裂する危険があります。
必ず指定の電池に交換してください。
使用済みの電池は，国または地域の法令に従って
処理してください。
FÖRSIKTIGHET!
Fara för explosion vid felaktigt placerat batteri.
Byt endast mot samma eller likvärdig typ av batteri,
enligt tillverkarens rekommendationer.
När du kasserar batteriet ska du följa rådande lagar
för regionen eller landet.
PAS PÅ
Fare for eksplosion, hvis batteriet ikke udskiftes
korrekt.
Udskift kun med et batteri af samme eller tilsvarende
type, som er anbefalet af fabrikanten.
Når du bortskaffer batteriet, skal du følge
lovgivningen i det pågældende område eller land.
HUOMIO
Räjähdysvaara, jos akku vaihdetaan virheellisesti.
Vaihda vain samanlaiseen tai vastaavantyyppiseen,
valmistajan suosittelemaan akkuun.
Noudata akun hävittämisessä oman maasi tai
alueesi lakeja.
FORSIKTIG
Eksplosjonsfare hvis feil type batteri settes i.
Bytt ut kun med samme type eller tilsvarende
anbefalt av produsenten.
Kasser batteriet i henhold til gjeldende avfallsregler.
⊼ᛣ
⊼ᛣ
བᵰ᳈ᤶⱘ⬉∴ϡℷ⹂ˈህӮ᳝⟚⚌ⱘ䰽DŽ
া᳈ᤶৠϔ㉏ൟ៪ࠊ䗴ଚ᥼㤤ⱘ⬉∴ൟোDŽ
໘⧚⬉∴ᯊˈᖙ乏䙉ᅜⳌ݇ഄ៪೑ᆊⱘ⊩ᕟDŽ
Note:
Be sure to keep your PC used for service and checking of this
unit always updated with the latest version of your anti-virus
software. In case a virus affected unit was found during service,
contact your Service Headquarters.
注意：
修理時に使用するパソコンは，ウィルス検出ソフトが常にアッ
プデートを行っているパソコンを使用してください。もし，修
理を行うセット，もしくはパソコンがウィルスに感染している
事が判明した場合は，ソニーグループ内は社内技術相談窓口に，
特約店様は特約店様専用電話窓口（修理窓口）にご相談くださ
い。
FDR-AX700
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and recommend
their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
• Set the soldering iron tip temperature to 350 °C approximately.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINE WITH
MARK 0ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
• Set the soldering iron tip temperature to 350 °C approximately.
If cannot control temperature, solder/unsolder at high temperature
for a short time.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Unleaded solder is more viscous (sticky, less prone to
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
• Be sure to control soldering iron tips used for unleaded solder and
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
FDR-AX700
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

サービス，点検時には次のことにご注意ください。
：レッドフリーマーク
無鉛半田は，下記の点に注意して使用してください。
1. 注意事項をお守りください。
サービスのとき特に注意を要する個所については，キャ
ビネット，シャーシ，部品などにラベルや捺印で注意事
項を表示しています。これらの注意書き及び取扱説明書
等の注意事項を必ずお守り下さい。
2. 指定部品のご使用を
セットの部品は難燃性や耐電圧など安全上の特性を持っ
たものとなっています。従って交換部品は，使用されて
いたものと同じ特性の部品を使用して下さい。特に回路
図，部品表に0印で指定されている安全上重要な部品は
必ず指定のものをご使用下さい。
3. 部品の取付けや配線の引きまわしはもとどおりに
安全上，チューブやテープなどの絶縁材料を使用したり
，プリント基板から浮かして取付けた部品があります。
また内部配線は引きまわしやクランパによって発熱部品
や高圧部品に接近しないよう配慮されていますので，こ
れらは必ずもとどおりにして下さい。
4. サービス後は安全点検を
サービスのために取外したネジ，部品，配線がもとどお
りになっているか，またサービスした個所の周辺を劣化
させてしまったところがないかなどを点検し，安全性が
確保されていることを確認して下さい。
5. チップ部品交換時の注意
・取外した部品は再使用しないで下さい。
・タンタルコンデンサのマイナス側は熱に弱いため交
換時は注意して下さい。
6. フレキシブルプリント基板の取扱いについて
・半田こてのこて先温度は約350℃に設定してくださ
い。
・同一パターンに何度もコテ先を当てないで下さい。
（3回以内）
・パターンに力が加わらないよう注意して下さい。
無鉛半田について
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には，無鉛（LeadFree）を意味
するレッドフリーマークがプリントされています。
（注意：基板サイズによっては，無鉛半田を使用していても
レッドフリーマークがプリントされていないものが
あります）
・ 半田こてのこて先温度は約350℃に設定してください。
温度調節が無理な場合は，高温短時間で作業を行ってくだ
さい。
注意：半田こてを長く当てすぎると，基板のパターン（銅
箔）がはがれてしまうことがありますので，注意して
ください。また，従来の半田よりも粘性が強いため，
IC端子などが半田ブリッジしないように注意してく
ださい。
・半田こてのこて先は，必ず無鉛半田用と有鉛半田用に分け
て管理してください。
 無鉛半田と有鉛半田が混在すると剥離現象が発生してしま
います。
FDR-AX700
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Model Information
Model FDR-AX700
Destination UC2, E23, J1 CEE, E35, CN1, IN5
Color system NTSC PAL
Internal recording media - -
LENS LSV-1730E LSV-1730E
Projector - -
GPS – –
EVF ✓ ✓
Wi-Fi ✓ ✓
NFC ✓ ✓
Multi interface shoe ✓ ✓
Charging capacitor (for ash) - -
FDR-AX700 7
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Table of Contents
Model Information
Manual Structure
Purpose of this manual....................................................................................................................5
Related manuals...........................................................................................................................5
1. Trouble Shooting
1-1. Self-diagnosis Function....................................................................................................... 1-1
1-1-1. Self-diagnosis Function.................................................................................................1-1
1-1-2. Note on the Function of Boards........................................................................................ 1-1
1-1-3. Self-diagnosis Code Table..............................................................................................1-1
1-2. Method of Coping with Shift Lens Error .....................................................................................1-5
1-2-1. E:62:02 Abnormality of IC for Steadyshot.............................................................................1-5
1-2-2. E:62:11 Shift Lens Overheating (Pitch)................................................................................ 1-5
1-2-3. E:62:12 Shift Lens Overheating (Yaw).................................................................................1-5
1-2-4. E:62:20 Abnormality of Thermistor....................................................................................1-5
2. Service Note
2-1. Operation Notes...............................................................................................................2-1
2-1-1. Flexible Board..........................................................................................................2-1
2-1-2. Fine-Wire Coaxial Cable............................................................................................... 2-1
2-2. Power Supply during Repairs .................................................................................................2-2
2-2-1. AC power adaptor...................................................................................................... 2-2
2-3. Precaution on Replacing the VC-1045 Board.................................................................................2-3
2-3-1. Destination Data........................................................................................................2-3
2-3-2. Restore Data............................................................................................................ 2-3
2-3-3. USB Serial No. and Product ID........................................................................................ 2-3
2-3-4. Update of MAC Address............................................................................................... 2-3
2-4. Notes for Replacing the EVF Display Device (LCD902) ....................................................................2-5
2-5. Checking the Wi-Fi Function................................................................................................. 2-6
2-6. Precaution on Replacing the MS-1037 Board.................................................................................2-7
2-6-1. Angular Velocity Sensor................................................................................................2-7
2-7. Imager DRA Data.............................................................................................................2-8
3. Adjustment
4. Replacement of Main Parts
4-1. Disassembly Flow.............................................................................................................4-1
4-2. Disassembly...................................................................................................................4-5
4-2-1. Grip Belt (913)..........................................................................................................4-5
4-2-2. Cabinet (BM)...........................................................................................................4-5
4-2-3. G Block Section........................................................................................................ 4-6
FDR-AX700 1
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

4-2-4. Heat Sink (GP) Block...................................................................................................4-6
4-2-5. NFC Antenna...........................................................................................................4-9
4-2-6. Heat Sink (GP)........................................................................................................ 4-10
4-2-7. Flexible Flat Cable (FFC-122)........................................................................................ 4-10
4-2-8. Top Block Section.....................................................................................................4-11
4-2-9. Heat Sink (HD)........................................................................................................4-12
4-2-10. IR Cabinet.............................................................................................................4-14
4-2-11. Hinge Cabinet......................................................................................................... 4-14
4-2-12. FP-2398 Flexible Board...............................................................................................4-15
4-2-13. Lens Cover............................................................................................................ 4-17
4-2-14. Cabinet (R) Section................................................................................................... 4-19
4-2-15. Inner mold.............................................................................................................4-19
4-2-16. ZM Frame............................................................................................................. 4-22
4-2-17. MS-1037 Board....................................................................................................... 4-23
4-2-18. IR-1009 Board.........................................................................................................4-24
4-2-19. VC-1045 Board........................................................................................................4-25
4-2-20. Lens Chassis, Lens Frame (R)........................................................................................ 4-27
4-2-21. Lens Frame (L)........................................................................................................4-29
4-2-22. LA-1003 Board........................................................................................................4-31
4-2-23. SS-1006 Board........................................................................................................ 4-32
4-2-24. Cabinet (G)............................................................................................................4-34
4-2-25. R Frame............................................................................................................... 4-35
4-2-26. CK-1019 Board........................................................................................................4-36
4-2-27. MS Holder.............................................................................................................4-37
4-2-28. MS Lid................................................................................................................ 4-38
4-2-29. Cabinet (R)............................................................................................................ 4-38
4-2-30. P Cabinet (C) Service................................................................................................. 4-40
4-2-31. PD-1054 Board........................................................................................................4-41
4-2-32. LCD Retainer..........................................................................................................4-43
4-2-33. T Type Hinge (S (A))..................................................................................................4-43
4-2-34. P Cabinet (M)......................................................................................................... 4-45
4-2-35. Cabinet (Top)..........................................................................................................4-47
4-2-36. IP-1002 Board.........................................................................................................4-48
4-2-37. Control Switch Block (PZ96000)..................................................................................... 4-48
4-2-38. Cabinet (PZ)...........................................................................................................4-49
4-2-39. Shoe Cover Base...................................................................................................... 4-50
4-2-40. Cabinet (Top)..........................................................................................................4-50
4-2-41. Shoe Lid...............................................................................................................4-51
4-2-42. Microphone cushion...................................................................................................4-52
4-2-43. Microphone unit.......................................................................................................4-52
4-2-44. Inner (473) mold (T).................................................................................................. 4-53
4-2-45. Heat sink (BM)........................................................................................................4-54
4-2-46. BT Frame..............................................................................................................4-56
4-2-47. DC Jack................................................................................................................4-57
4-2-48. BT Panel Block Assy..................................................................................................4-59
4-2-49. VF Cabinet Assy...................................................................................................... 4-59
4-2-50. Eye Cup............................................................................................................... 4-60
4-2-51. VF-1021 Board........................................................................................................4-60
4-2-52. VF Unit Assy EP3N...................................................................................................4-61
4-2-53. Ornamental Ring (1730).............................................................................................. 4-63
4-2-54. 1 Group Lens Assy....................................................................................................4-65
4-2-55. Filter Base (1730)..................................................................................................... 4-65
4-2-56. CM-1016 Board.......................................................................................................4-66
FDR-AX700 2
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

4-2-57. 2 Group Lens Assy....................................................................................................4-67
4-2-58. P Frame Assy..........................................................................................................4-67
5. Repair Parts List
5-1. Note on Repair Parts.......................................................................................................... 5-1
5-2. Exploded View................................................................................................................ 5-2
Overall-1 Section.................................................................................................................... 5-2
Overall-2 Section.................................................................................................................... 5-3
Overall-3 Section.................................................................................................................... 5-4
Overall-4 Section.................................................................................................................... 5-6
Lens Block Section.................................................................................................................. 5-8
G Block Section......................................................................................................................5-9
Cabinet (R) Section.................................................................................................................5-10
LCD Block Section.................................................................................................................5-11
Top Block 1 Section................................................................................................................ 5-12
Top Block 2 Section................................................................................................................ 5-13
BT Section..........................................................................................................................5-14
EVF Section........................................................................................................................ 5-15
Lens-1 Section......................................................................................................................5-16
Lens-2 Section......................................................................................................................5-17
5-3. Accessories...................................................................................................................5-18
Except Japanese Model.............................................................................................................5-18
Japanese Model.....................................................................................................................5-19
Revision History
FDR-AX700 3
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Manual Structure
Purpose of this manual
This manual describes the information items that premise the service based on the components parts assuming use of
system and service engineers.
Related manuals
Besides this manual, the following manuals are available.
•Operating Guide (Supplied with this unit)
• Help Guide (Web manual)
Help Guide is an on-line manual.
Refer to it for in-depth instructions on the many functions of the camcorder.
• Adjust Manual (Available on request)
The adjustment software is necessary for adjustment and various checking of this unit for the service.
FDR-AX700 5
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

目次
このマニュアルについて
本書の目的...............................................................................................................................5
関連マニュアル......................................................................................................................... 5
1. トラブルシューティング
1-1. 自己診断機能................................................................................................................1-1
1-1-1. 自己診断機能について...............................................................................................1-1
1-1-2. 基板について..........................................................................................................1-1
1-1-3. 自己診断コード表....................................................................................................1-1
1-2. シフトレンズエラーの対処方法...........................................................................................1-5
1-2-1. E：62：02 手振れ補正用 IC の異常................................................................................1-5
1-2-2. E：62：11 オーバーヒート Pitch..................................................................................1-5
1-2-3. E：62：12 オーバーヒート Yaw................................................................................... 1-5
1-2-4. E：62：20 サーミスタ異常.........................................................................................1-5
2. サービスノート
2-1. 作業時の注意................................................................................................................2-1
2-1-1. フレキシブル基板....................................................................................................2-1
2-1-2. 細線ケーブル..........................................................................................................2-1
2-2. 修理時の電源供給について................................................................................................2-2
2-2-1. AC アダプタ...........................................................................................................2-2
2-3. VC-1045 基板交換時の注意............................................................................................... 2-3
2-3-1. 仕向データ............................................................................................................2-3
2-3-2. リストアデータ.......................................................................................................2-3
2-3-3. USB シリアルナンバーとプロダクト ID について................................................................2-3
2-3-4. MAC アドレスの更新................................................................................................ 2-3
2-4. EVF 表示素子（LCD902）交換時の注意..................................................................................2-5
2-5. Wi-Fi 接続確認...............................................................................................................2-6
2-6. MS-1037 基板交換時の注意...............................................................................................2-7
2-6-1. 角速度センサー.......................................................................................................2-7
2-7. イメージャ DRA データ.................................................................................................... 2-8
3. 調整について
4. Replacement of Main Parts
4-1. Disassembly Flow...........................................................................................................4-1
4-2. Disassembly................................................................................................................. 4-5
4-2-1. Grip Belt (913)........................................................................................................4-5
4-2-2. Cabinet (BM)..........................................................................................................4-5
4-2-3. G Block Section.......................................................................................................4-6
4-2-4. Heat Sink (GP) Block.................................................................................................4-6
4-2-5. NFC Antenna..........................................................................................................4-9
4-2-6. Heat Sink (GP).......................................................................................................4-10
FDR-AX700 1
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

4-2-7. Flexible Flat Cable (FFC-122)......................................................................................4-10
4-2-8. Top Block Section...................................................................................................4-11
4-2-9. Heat Sink (HD)......................................................................................................4-12
4-2-10. IR Cabinet............................................................................................................4-14
4-2-11. Hinge Cabinet.......................................................................................................4-14
4-2-12. FP-2398 Flexible Board............................................................................................4-15
4-2-13. Lens Cover...........................................................................................................4-17
4-2-14. Cabinet (R) Section................................................................................................. 4-19
4-2-15. Inner mold...........................................................................................................4-19
4-2-16. ZM Frame............................................................................................................4-22
4-2-17. MS-1037 Board.....................................................................................................4-23
4-2-18. IR-1009 Board......................................................................................................4-24
4-2-19. VC-1045 Board..................................................................................................... 4-25
4-2-20. Lens Chassis, Lens Frame (R)..................................................................................... 4-27
4-2-21. Lens Frame (L)......................................................................................................4-29
4-2-22. LA-1003 Board......................................................................................................4-31
4-2-23. SS-1006 Board......................................................................................................4-32
4-2-24. Cabinet (G)...........................................................................................................4-34
4-2-25. R Frame..............................................................................................................4-35
4-2-26. CK-1019 Board..................................................................................................... 4-36
4-2-27. MS Holder...........................................................................................................4-37
4-2-28. MS Lid................................................................................................................4-38
4-2-29. Cabinet (R)...........................................................................................................4-38
4-2-30. P Cabinet (C) Service...............................................................................................4-40
4-2-31. PD-1054 Board..................................................................................................... 4-41
4-2-32. LCD Retainer........................................................................................................4-43
4-2-33. T Type Hinge (S (A))................................................................................................4-43
4-2-34. P Cabinet (M)........................................................................................................4-45
4-2-35. Cabinet (Top)........................................................................................................4-47
4-2-36. IP-1002 Board...................................................................................................... 4-48
4-2-37. Control Switch Block (PZ96000)................................................................................. 4-48
4-2-38. Cabinet (PZ).........................................................................................................4-49
4-2-39. Shoe Cover Base.................................................................................................... 4-50
4-2-40. Cabinet (Top)........................................................................................................4-50
4-2-41. Shoe Lid..............................................................................................................4-51
4-2-42. Microphone cushion............................................................................................... 4-52
4-2-43. Microphone unit....................................................................................................4-52
4-2-44. Inner (473) mold (T)...............................................................................................4-53
4-2-45. Heat sink (BM)......................................................................................................4-54
4-2-46. BT Frame............................................................................................................ 4-56
4-2-47. DC Jack.............................................................................................................. 4-57
4-2-48. BT Panel Block Assy................................................................................................4-59
4-2-49. VF Cabinet Assy.....................................................................................................4-59
4-2-50. Eye Cup..............................................................................................................4-60
4-2-51. VF-1021 Board......................................................................................................4-60
4-2-52. VF Unit Assy EP3N................................................................................................. 4-61
4-2-53. Ornamental Ring (1730)...........................................................................................4-63
4-2-54. 1 Group Lens Assy..................................................................................................4-65
4-2-55. Filter Base (1730).................................................................................................. 4-65
4-2-56. CM-1016 Board.....................................................................................................4-66
4-2-57. 2 Group Lens Assy..................................................................................................4-67
4-2-58. P Frame Assy........................................................................................................4-67
FDR-AX700 2
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

5. Repair Parts List
5-1. Note on Repair Parts........................................................................................................5-1
5-2. Exploded View...............................................................................................................5-2
Overall-1 Section...................................................................................................................5-2
Overall-2 Section...................................................................................................................5-3
Overall-3 Section...................................................................................................................5-4
Overall-4 Section...................................................................................................................5-6
Lens Block Section.................................................................................................................5-8
G Block Section.................................................................................................................... 5-9
Cabinet (R) Section...............................................................................................................5-10
LCD Block Section................................................................................................................5-11
Top Block 1 Section..............................................................................................................5-12
Top Block 2 Section..............................................................................................................5-13
BT Section.........................................................................................................................5-14
EVF Section.......................................................................................................................5-15
Lens-1 Section....................................................................................................................5-16
Lens-2 Section....................................................................................................................5-17
5-3. Accessories.................................................................................................................5-18
Except Japanese Model..........................................................................................................5-18
Japanese Model..................................................................................................................5-19
Revision History
FDR-AX700 3
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

このマニュアルについて
本書の目的
本書は，システムエンジニアやサービスエンジニアの方々にご使用いただくことを想定し，本機の保守に関
する情報，部品レベルまでのサービスを前提とした情報を記載しています。
関連マニュアル
本機には，この「サービスマニュアル」のほかに，下記のマニュアルが用意されています。
• 取扱説明書（本機に付属）
• ヘルプガイド（Web 取扱説明書）
「ヘルプガイド」はオンラインで見るマニュアルです。さらに詳しい使いかたを知りたいときにご覧く
ださい。
• アジャストマニュアル（別途用意）
本機の調整および各種動作確認を行うのに必要なサービス用の調整ソフトウェアです。
FDR-AX700 5
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)

Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2019/01/1806:14:17(GMT+09:00)