Soundance SDY019 User manual

1
Soundance
Bluetooth Speaker User Manual
SDY019
(Version 2.1)
Thank you for purchasing Soundance bluetooth speaker. Please read this manual
carefully and keep it for future reference.
Features of the speaker:
1. Ne Bluetooth Technology, support ireless control through Bluetooth device
2. LED display ith Time and Alarm clock function.
3. Built-in FM radio ith automatic channel searching and fine tune function
4. Support plug and play of MP3, WAV, WMA, FLAC format of audio files from
Micro SD card/TF card and USB. Support Shuffle hen playing from USB or Micro
SD/TF card.
5. 3.5mm line-in jack for ired devices
6. Built-in rechargeable battery supports up to 8 hours playback (medium volume)
7. T o 40MM drivers deliver deep and rich sound
8. Built-in Microphone for phone Calls
9. Setting FM and Music in USB/Micro SD card as alarm

2
-
Button illustration:

3
Operating Instructions:
1 Charging
With the speaker turned off, connect the Micro-USB connector of the charging
cable to the DC5V input socket at the rear side of the speaker, and plug the USB
connector of the charging cable to an external USB po er supply socket ith a
minimum supply current of 1A. The external USB po er supply can be the USB
socket in your computer/laptop, the USB adaptor of most cell phone USB chargers
ith DC5V output, or the 5V USB port of a po er socket etc.
2 On/Off
The On/Off slide button is at the rear side of the speaker. Slide to the on or off
position to turn the speaker on or off.
3 Bluetooth
Paring – Press the button to enter Bluetooth mode. The LCD screen ill
display “bt” to sho that the speaker is in Bluetooth mode. Turn on your Bluetooth
device (such as a mobile phone, laptop, PDA etc) search for Bluetooth equipment
“SDY-019”, and then pair up ith the speaker. There ill be a sound from the
speaker hen Bluetooth connection is established.
Bluetooth phone call - When paired to your phone, press the “ ” button to
ans er incoming calls, and press the “ ” button again to end the call. Press the
“ ” button t ice ill call back to the last incoming call number.
Note: Microphone is on top of the speaker, please talk to the microphone hen
making phone calls.
Track selection – When playing music in Bluetooth mode, a short press of /
/ /
/
/ ”button ill jump to the previous track or next track. Track selection can
also be done from your Bluetooth device.
4 FM radio

4
Press the “ ” button to enter FM mode.
FM Channel Search – When in FM mode, press and hold the “ ” button to start
automatic channel searching. The speaker ill save the channels it finds and
automatically assign channel number.
Channel Selection – After channels have been saved, short press the button
to move to next channel.
Fine Tune - In FM mode, press the “ / ”button to fine tune the FM
frequency.
5 USB / Micro SD Card
The speaker supports plug and play for USB/Micro SD card. Just plug in your USB
Flash Drive or Micro SD Card into the speaker’s USB port or Card slot and the
speaker ill play the music files automatically. Refer to item 10 Technical data
belo for acceptable music formats.
Shuffle – When playing music from USB/Micro SD card, hold the button ill
s itch bet een shuffle and sequence playing. “RAN” on the screen means shuffle
and “ALL” means sequence playing.
6 Volume adjustment
When playing music/FM radio or hen making a phone call under Bluetooth
mode, the volume can be adjusted by holding the “ /
/ /
/ / ”button. The
volume can also be controlled from your Bluetooth device (cellphone, laptop,
PDA etc.)
7 Time setting
To set the time, first, make sure the screen is displaying time. And then hold the
button until the digits on the LCD screen keep flashing. Press the button
to s itch bet een the hour and minute setting. Press the / button to
adjust the time accordingly.

5
8 Alarm
1.) Under Alarm/Time mode, press the alarm button to turn the alarm on or off.
When alarm is on, the bell shape indicator on the screen ill be on.
2.) To set the alarm time, first hold the alarm button. Press the alarm button to
s itch bet een the hour and minute setting. Press / button to
adjust the alarm time accordingly.
3) Setting music in USB/Micro SD as alarm: Insert an USB or TF card, hen
playing the music you ant to set as alarm, press the alarm button. The screen
ill display” -AL- ”, then the alarm music is set. Please note that the music
setting ill be cleared hen the USB or TF card is removed from the speaker. If
no music is set as alarm music, the default “di-di” sound ill be set as alarm.
4) Setting FM radio as alarm: Press the alarm button hen the speaker is
playing the FM channel you ant to set as alarm. The screen ill display” -AL- ”,
then the FM channel is set as alarm.
5) The alarm ill run for 3 minutes, pressing any button ill stop the alarm. If FM
channel is set as alarm, you need to set music in USB/Micro SD card as alarm
first and then remove the USB/Micro SD card if you ant to set the default”di-di”
sound as alarm.
6) Volume of alarm ill be the system volume set by the user. Make sure you
set the desired volume for the alarm by holding the “
/
/ /
/ / ”button before

6
turning off the speaker.
9 Reset – If the speaker is not orking normally, press button and
button at the same time to reset the speaker.
10 Technical Data
Po er
Built-in high capacity Lithium Ion battery
External USB 5V supply
Po er input: 500-1000mA
Technical
Frequency 80HZ-20KHZ
FM radio 87.5-108MHz
SNR ≥
≥≥
≥90db (line out)
Sensitivity Rate 80db
THD 0.3% (line out)
Output po er 5W*2
Speaker Φ45mm 3Ω 3 *2
Music format MP3、WMA、WAV、FLAC
Speaker size 240 x55x 61.5mm
11 Trouble shooting:
 Can’t turn the speaker on:
Check if the battery is in lo . Charge the speaker and turn on again.
 Can’t charge the speaker:
Check the po er supply is orking and that the output of the po er supply to the
charge cable is 5V and > 1A.
Check that the charge cable and connectors of the cable are not damaged.
 No sound:
Check the speaker is paired ith the right Bluetooth device. If not, disconnect
the Bluetooth connection and pair again to the right device.
Check the music format in the USB or TF/card.

7
 No FM radio
Check if there is any electronic equipment interfering ith the signal.
Adjust the direction or position of the speaker or move to an open area for a
better signal reception.
12 Warning:
1. Do not use the product in high temperatures. Al ays keep the product a ay
from fire. For your o n safety, never thro the product into a fire hich may
cause an explosion and personal injury.
2. Do not use the product close to high-voltage ires or electronic equipment.
3. Keep the speaker a ay from ater, and avoid using the speaker in
high-humidity environments.
4. Keep the speaker a ay from any strong magnetic fields.
13 Support:
If you have any questions or problems in using the speaker, please feel free to rite
to: [e-mail]