spacer SPAR-WCHG-01 User manual

Wireless Charge Stand 10W Fast Charge, QI
SPAR-WCHG-01
User manual
Features:
-Type: wireless charger&stand holder
-Material: ABS
-Port: 1 x USB
-Input voltage and current: 100-240V/1.2A
-Output voltage and current: 5V/1A, 7.5V/1A, 9V/1.2A
-Output power: 5W/7.5W/10W
-Protection: shortcircuit protection/overcharging/overvoltage
-Dimensions: 11.8 x 7.0 x 8.75 cm
-Colour: white
-LED light control
-Charging distance: < 8 mm
-Functions: - wireless charging for all the phones with QI technology
-portrait and landscape charging phone stand holder
- Compatible with all QI certified devices.
Technical details:
-Input voltage and current: 100-240V/1.2A
-Output voltage and current: 5V/1A, 7.5V/1A, 9V/1.2A
-Output power: 5W/7.5W/10W
Packaging contents: Wireless charger stand, user manual, microUSB to USB cable
Use instructions:
1. Plug the charging cable in a compatible adaptor and connect it to the wireless charger. The LED indicator will flash, and the
charger will enter standby mode.
2. In order to recharge your QI compatible device, place it on the wireless charger’s surface. The LED indicator will now turn on.
3. When it’s fully charged, remove your device from the surface of the wireless charger.

Special 2-1 function:
It combines the wireless charger with a stand holder in one unit. Two built-in coils allow the phone to be charged in both vertical and
horizontal position. It is easy to use and offers a comfortable viewing angle due to the 60 degrees tilt.
Thanks to the smart chip, the charger detects the type of device connected and its charging needs. Assures a stable and fast charging.
Attention
In order to assure that quick charge will function, place your device on the center of the wireless charger’s surface. An incorrect
placement can affect charging speeds or lead to failure of charging.
Wireless charging may not work properly if you have attached a thick case to your device. If your case is thick, remove it before
placing your device on the wireless charger.
Do not use metallic phone cases.
Only use the product in a temperature range of 0-45 degrees Celsius.
Cable protection. Do not damage the connecting cable, in case you used it. Avoid pulling or twisting the cord where it joins the device.
Protect the product from moisture. Don’t expose the device to rain, water, wetness or high humidity. Avoid the direct contact with water.
Protect the product from fire and heat sources. Don’t place it in the near of the heat sources (radiators or other heat producing devices)
Disposing the product. Do not dispose the product or the other electrical and electronic components with consumers waste. Use only
specialized electrical and electronic waste collection centers.
Waste disposal:
The crossed-out wheeled-bin symbol on our product or packaging reminds you that, in accordance with local laws and regulations,
your product and / or its battery must be disposed of separately from household waste/garbage. When this product reaches the
end of its life, take it to a collection point designated by the local authorities. For information about the local collection centers, please
contact the town hall of your locality.
Royal Computers declares under our own responsibility that the product, wireless charger, conforms with the
European directive 2014/53/UE.
The complete text of the EU Declaration of Conformity is available at the following website www.spacer.ro