Spacetronik SPD-M771 User manual

VIDEO DOOR PHONE
Spacetronik SPD-M771
USER MANUAL
Please read this manual carefully before using the product .
-5-
1 2 3 4 5
ONON DIPDIP
6 7
Monitor NOT at the end of the line Monitor at the end of the line
1 2 3 4 5
ONON DIPDIP
6 7
-4-
5. User Codes (Monitor bit codes) Setup
Every room station must have an ID, set through the bit
codes(list right)
 Bit-1 to Bit-5 are used to configure the room ID.
 Bit-6 is the line-terminal switch, set the LAST monitor
 to ON, otherwise set OFF.
 Bit-7 is to turn the ringtone at the door station ON/OFF.
 You can have a Max of 4 monitors per button/code.
c

Inner Call
User can call other apartments by pressing
button.
To start the Inner call, first you need to setup a dia
l
number on the monitor.
How to setup the dial number on the monitor?
Keep pressing button until you hear a long beep.
Start setting 2 digit dial number.
button refers to first digit 1~9 .
button refers to 0 / confirm.
Eg. Set the dial number to 09.
press (Long beep) – press – press 9 times –
press .
Set the dial number to 10.
press (Long beep) – press 1 time – press –press
Set the dial number to 12
press (Long beep) – press 1 times – pres s press
2 times -press .
How to change the ring tone?
Keep pressing button until you hear a lon
g beep,
current ring tone will be displayed.
There are 9 ring tones to choose from, press b ut
ton
to choose the ring tone you want.
Press button again to save and exit.
p
2222
T
T
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
6677
6677
6677
6677
6677
6677
6677
6677
6677
6677
6677
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
6677
6677
6677
6677
6677
6677
6677
6677
6677
6677
6677
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
1122334455
ONON DIPDIP
6677
6677
6677
6677
6677
6677
6677
6677
6677
6677
Code=2
Code=1
Code=3
Code=4
Code=5
Code=7
Code=9
Code=6
Code=8
Code=10
Code=11
Code=12 Code=23
Code=13
Code=14
Code=15
Code=16
Code=18
Code=20
Code=17
Code=19
Code=21
Code=22
Code=25
Code=26
Code=27
Code=29
Code=31
Code=28
Code=30
Code=32
Code=24
User Code
Bit state User Code Bit state User Code Bit state
Power supply:
Power consumption:
Wiring
DC 24V (supplied by adaptor)
Standby 15mA, working 350mA
2 wires, non-polarity
6. Specification Setup
Produced in ChRL for:
DMTrade Mikołaj Tomaszewski
Wiśniowa 36;
64-000 Kościan, Poland
NIP: PL 6981681757
[email protected]
Tel.: [phone] [phone]

Door Release
During the conversation with the visitor, press button to
unlock the door.
Monitoring
Keep pressing button while in standby mode you will be
able to see the view of outdoor station camera.Keep
pressing button to switch between door station and extra
camera. (firstly you should have finish setting door station
camera and extra camera, see bellow).
How to set door station camera and extra camera?
Keep pressing and button until you hear a long beep.
Start setting state of multiple door station and extra camera.
Press as many times as the quantity of specific code of
door state.
For example :
There are 3 door stations, 2 door station with extra camera,
specific code of door state is 8.
Keep pressing and (Long beep) – press 8 time-
press .
There are 1 door stations,0 door station with extra camera,
specific code of door state is 1.
Keep pressing and (Long beep) – press 1time-
press .
The form of the special code of the door state is as follows:
88
-3-
Door state Door state
Specifi code Specific code
1 Door
0 Cam
3 Door
2 Cam
Code=1 Code=8
1 Door
1 Cam
3 Door
3 Cam
Code=2 Code=9
2 Door
0 Cam
4 Door
0 Cam
Code=3 Code=10
2 Door
1 Cam
4 Door
1 Cam
Code=4 Code=11
2 Door
2 Cam
4 Door
2 Cam
Code=5 Code=12
3 Door
0 Cam
4 Door
3 Cam
Code=6 Code=13
3 Door
1 Cam
4 Door
4 Cam
Code=7 Code=14
1. Parts and Functions
7" Digital TFT LCD Screen
Speaker
Unlock / Inner call
Talk / Monitor
Microphone
-1-
SD card slot
BUS terminal
Bell connection port
IP Connection port
DIP switches
Volume
Brightness
Color
Ringtone
(6:CALL)
(8:GND)
(7:VI)
(4:SP)
(3:ISK)
(2:IJK)
(1:IDJ)
IP Connection port
(5:MIC)
1
1122334455
ONON DIPDIP
6677
1122334455
ONON DIPDIP
6677
-2-
Answering a door call
Press CALL button on door station, the monitor rings, the
visitor can be seen on the monitor screen. If nobody answers
the call, the screen will automatically turn off in 30 seconds.
To answer an incoming call, press to answer, calls last for
90 seconds - Press again to end the conversation. If the
system connects with two or more monitors, answering any
monitor, the others will turn off automatically.
If there is an extra camera, during and incoming call, keep
pressing switch to see the view of extra camera.
2. Monitor Mounting
4. Operation Instructions
3. Basic Wringing (With IP module)
145 - 160 cm
Router
Power
Supply
CAT 5
IP Module
Mobile phone
2
Monitor
Door station
2
AC
1. Using the screws to fix the mounting bracket on the wall.
2. Connecting the system correctly, then hang the monitor on
the mounting bracket firmly.