Commax T45-K User manual

USER MANUAL
T45-K
www.commax.com
Thank you for purchasing COMMAX products.
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and
follow instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal operation of the product.

CONTENTS
Cautions
Product description
Includid items
Parts and their functions
Dimensions
Fingerprint registration
Verification mode
Functions key
Displays
Menu navigation buttons
Access to the system menu
Enroll
CONTENTS
Delete
Amend
Set temp ID
User
Getting Started
Start
Operationg menu
COMMAX Access Control Solutions

Basic Time, Data, Language, Volume, Background Image
CONTENTS
Verification Mode, ID Mask, Use Tamer Alarm
Use Touch Sensor, Calibrate Sensor, Lumidigm Spoof, Restore Factory
Advanced
Setting
AC Setting▶ Define Timezone, User Timezone, Lock Type(NC,NO), Lock Door,Release Time,
Door Open Warning, Instrsion Detection Sensor Mode, Reaccess Count,
Reaccess Limit Time, Wiegand Format, Anti-Passback, Setting Reader Of Outer Fingerprint
Communication▶Device ID, Baud Rate, TCP/IP Settings, Setting Wireless LAN,
Managing Computer IP Address, Communication Password
Schedule▶ Set Tmode, Ring Settings, Auto Door, Auto Funckey, None-Relay Funckey,
Day Light, Holiday, Funckey Alram, CD2 Auto Funckey, Idle Settings
Log Setting▶ Management Log Warning, General Log Warning
3.USB MEMORY
Dounload General Log/ Download All General Log/ Download Management Log/
Download All Management Log/ Download User Info/ Upload User Info/ Upgrade Firmware
4.SYSTEM INFO
Memory▶ User, Fingerprint, ID Card, General Log, Management Log, Number of photo
Device Info▶ Release Date, Serial Number, Manufacturer, Product Name,
Product Type, Engine Version, Firmware Version
Advanced▶ View General Log, View Management Log, View User Info
5.TEST
Test All/ Test Memory/ Test LCD/ Test Sound(AUTO)/ Test Sound(MANUAL)/ Test Sensor/ Test RTC/
Test cast status/ Test Card Reader
COMMAX Access Control Solutions

Keep out of direct sunlight
and heat radiation sources
Before using this device, read and follow all instructions for safety.
Shall not be exposed to dripping
or splashing and no objects filled
with liquids such as vases,
shall be placed on the products.
When cleaning, do not use liquid solvent or
wet cloth. Wipe with soft cloth.
Never disassemble or modify this device in any way.
(KJTECH Co., Ltd is not liable for porblems caused
by unauthorized modification or attempted repair )
Do not install this device
near by TV,monitor or magnetic
interference
If the product fails to operate
normally, contact the authorized
dealer or service senter
Cautions
COMMAX Access Control Solutions

Product Specification
Confirm the specifications.
ARM926E_21bit
NAND Flash 8G + 256RAM
4.3TFT COLOR LCD
5K, 10K, 30K, 50K
Loading function
RS-485, TCP-IP
Loading function
Loading function
Loading function (inner skin way)
Micro SD, USB 2 Slot
500K, 100K
2 EA
VOIP function
125Khz (EM/HID/Prox)
13.56Mhz (Mi fare/I-calss SE/ Felice)
26/34/37/40 bit
4.3inches full touch
143x143x42(mm)
CPU
Memory
display
Fingerprint Capacity
Camera
Communication method
Wi-Fi
Fingerprint forgery prevention
USB
Event Data
Relay
Door phone function
OE(Power of Ethernet)
RF Card
Wie gand input / Output
KEY PAD
Product Size
COMMAX Access Control Solutions

Includid Items
Bracket
9PIN 6PIN 5PIN 4PIN
(Power, 485 CON)
Cable Screw / Program CD
For Bracket 4ea T3x20mm
For T45-K 2ea M3x6mm
T45-K
T45-K
Wiring harness by the
'wiring manual' to see it.
This system comes with the following comeponents.
COMMAX Access Control Solutions

LED
Product statu.
CAMER
Face capture
Mike
Door phone function.
Fingerprint Sensor
User registration,
authentication,
On the fingerprint input
Be used.
Card Sensor
Is used for user
authentication.
Color TFT LCD
Displays time,
device status,
user list and UI
for operation
USB & Micro SD
USB & micro SD memory devices
For connecting slot.
Connector
Cable for connection to
Connector.
Parts and Their Functions
Function Key
It would be used
event selection key
such as time attendance
or enter/exit administration.
COMMAX Access Control Solutions

Dimensions
Front View Bracket Bracket
Side View
T45-K
COMMAX Access Control Solutions

Fingerprint Registration
You have to register fingerprint in proper way to
enhance recognition rate. Recommended to use
finger which has no damage. Recommended to
register more than two fingerprint in case.
Place the finger on the sensor as seen in below in the proper way. Place the entire area of your finger firmly to the sensor.
Notes on the fingerprint input
Proper way
Improper Way
COMMAX Access Control Solutions

Card Authentication Method ID Authentication Method Fingerprint Authentication Method
Verification mode can be setup in verification mode (Settings>Basic>Verification Mode)
Vertfication Mode
CD
CD&FD
ID&CD
ID&CD&FD
ID
ID&FD
OPEN
CLOSE
FP
KJ-3500 supports various type of access mode : Combination of Fingerprint, Card and ID(PIN)
Setting of operating mode
in accordance with security
level refer to environment
setting > advanced setting >
operating mode
COMMAX Access Control Solutions

Functions Key
Function Key is usually used for Time & Attendance.
The admin is able to setup a certain definition to a function key in the program (F1 = Sing in) The admin is able to find out
the users attendance records.
1. Press Function Key (F1~F4) only or press numbers after Function Key .
2. Present the card to enter.
CARD Authentication Scheme F1~F4 + 0~9
FD Authentication Scheme F1~F4 + Fingerprint
1. Press Function Key (F1~F4) only or Press numbers after Function Key .
2. Place Finger Print to enter.
ID Authentication Scheme F1~F4 + 0~9
1. Press Function Key (F1~F4) only or Press numbers after Function Key .
2. Input ID used to enter.
COMMAX Access Control Solutions

Displays
These displays are primary screens.
COMMAX Access Control Solutions

Menu Navigation Buttons
Forward
Backward
Previous Menu
End Menu
Act(Select Menu)
COMMAX Access Control Solutions

Access To The System Menu 1
Default condition and admin is not registered.
*>1 2 3 4 > # Menu
1. Press * on the touch pad
2. Press # after putting 1, 2, 3, 4
3. Success entering system menu
4. Move to your desired menu to use F1 or F2
COMMAX Access Control Solutions

Access To The System Menu 2
Only when admin is registered. Refer to “Admin Registration part” for admin registration.
When admin ID is incorrect, access to the system menu is denied. When admin ID is not registered anyone can be access to system menu.
So it is highly recommended to register admin More than one. Unless stated otherwise instructions in this manual stars from system menu.
COMMAX Access Control Solutions
* > Administrator ID > # > Fingerprint(Card) Certificate > Menu
1. Press * on the touch pad
2. Press * with registered administrator ID
3. Certificate registered fingerprint or card of administrator
4. Success to access system menu
5. Move to menu that wants F1 or F2
It could be back to the
main menu to press
* if put wrong No.(ID)

www.commax.com
USER
COMMAX Access Control Solutions

1.Press * on the main
2.Press # with registered No. and ID as an administrator
3.Select users to press #
4.Select registration to press #
5.Use F1 or F2 to move, put ID and press #
to designate authority It can register fingerprints,
cards and pictures to put a button
In the case registered manager, initial P/W vanish,
so preparing the absence or leaving of manager, we recommend registering one more manager.
In the middle of registration process, first fingerprint or second fingerprint or card, one or two doing, other process will be omit.
User>Registration
COMMAX Access Control Solutions

6.Enter fingerprint when a sensor light comes.
* It totally register fingerprint for 3 times and
it would move to previous menu to press * if finishes
fingerprint registration.
7.A card that would use for enter/exit should be read
if puts on a screen.
Press # to register a card
8.Register to press # after shooting button for photo.
9.Go back to a main menu to press F4 if
all procedures are clear.
User>Registration
COMMAX Access Control Solutions

Enter to System Menu
1.Select user to press #
2.Select Delete to press #
3.Put administrator's or user's ID for delete
4.It would be finished to press # after selecting
fingerprint or card that wants to delete
User>Delete
Same as registration process, it is able to delete 1st fingerprint, 2nd fingerprint and card in each,
If wish to delete all 3data, select ‘Delete All’ and corresponding ID is deleted
COMMAX Access Control Solutions

User>Amend
Function of amending user, it is possible to change manger to user or user to manager,
also amend registered fingerprint and card data.
1. After entry system menu > user > enroll
2. After input ID of needing of amend #,
and push OK.
3. After select fingerprint or card then amend
4. Return to initial screen
COMMAX Access Control Solutions