Spacosa Gper User manual

2015년3월
Gper Manual

Gper

Gper
LED display
Power Button
Function Button
50mm
50mm
-사용가능기기 안드로이드 4.3 이상, iOS 7.0 이상
-무게 42g
-충전시간 약90분

Gper Features
CPU - Nordic nRF51822, Bluetooth Low energy/ 2.4GHz RF system on chip
- ARM Cortex-M0 32bit processor
GPS -Quectel, 66 search channels, Sensitivity - 165dBm(tracking)
ANT -LoRa® : Internal helical ANT . GPS : Internal Patch ANT.
DISPLAY -THREE COLOR LED
BUTTON -2 Button (POWER & SOS)
POWER -5V 1A (Micro USB)
SENSOR -BOSCH BMA250E, Triaxial acceleration sensor

Gper Features
1. To switch on or off the device: Press and hold Power button
2. SOS function: Press and hold the F button for 5 seconds
3. Change into Bluetooth mode: Press and hold Power and F button
together for 5seconds
•Device can be registered in to app(FAMY)
•Device’s firmware can be updated
4. To charge the device: connect USB cable to USB port jack within the
device.
5. All above features are necessary for the actual use of location
tracking service.
As the device collects location data and send its location data to the
server through LoRa network.

Gper LED signal

03. Registering Object–1) Gper
3-1-1 Gper for CATCH LOC App Download
This app need to register Gper only first time.
If you already registered Gper, you just manage it in catchloc SaaS or App.
<Gper APP Download & Install>
Search for “Gper” in Android Market, iOS app store to download ‘Gper for CATCH LOC’ app.
Android Download Address:
https://play.google.com/store/apps/details?id=com.spacosa.android.gper.b2b
iOS (iPhone) Download Address:
sorry. We don’t develop.
- Download app.
- Install app.
- Run app
- Use ID/Password that has been
provided by SPACOSA or You has
created
Login >> Create a group >> Registering Object >> Registering Group members >> Using service

03. Registering Object–1) Gper
3-1-2 Gper for CATCH LOC App: Registration
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
- Please select the target - STEP 02 : Switch on Gper.
Press Power button for 2 seconds.
If you can see flashing Red LED, It turns on.
Power Button

03. Registering Object–1) Gper
3-1-3 Gper for CATCH LOC App: Registration
- STEP 05
Please choose a group you wish the device
to be belong to.
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
- STEP 03
Press and Hold Power and F button for 2
seconds to turn beacon mode on
- LED will flash in RED & BLUE.
- STEP 04
Please SELECT the device the strongest signal
Please set the password for Security.
If no gper password, anyone can
register gper. Then anyone can
see the gper’s location.

03. Registering Object–1) Gper
3-1-4 Gper for CATCH LOC App: Registration
Registration Completed
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
- STEP 05
If Gper have a password.

03. Registering Object–1) Gper
3-1-5 Gper for CATCH LOC App: Management
Before connecting Gper:
NAME, Location interval can be edited only.
But these information can’t be update instant.
Because of Gper using Class A, these can be
update, when LoRa commucation success firstly.
If you want to update instantly, Touch the
“management” Button.
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
You can do
- Change Gper name
- Update Gper firmware
- Check Battery Level
- Change the location interval
- Please select Group & the Gper
you wish to manage.
No connection management

03. Registering Object–1) Gper
3-1-6 Gper for CATCH LOC App: Management
로그인 >> 그룹확인&생성 >> 위치 OBJECT 등록 >> 그룹원 등록 >> 서비스이용하기
Connection management
-Touch the “management” Button - Swich on Gper
- Press Two Button same time for
changing Beacon Mode
- Select Gper

03. Registering Object–1) Gper
3-1-7 Gper for CATCH LOC App: Management
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
Screenshot of Connecting Gper. - Gper is connected successfully
*Update button will be available if you
are not at the latest version.
Please save after you have changed
the “Location Collecting time”

03. Registering Object–1) Gper
3-1-7 Gper for CATCH LOC App: Firmware Update
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
Check the connection Message.
Touch the “Update” button
*Update button will be available if you
are not at the latest version.
Firmware Update
Firmware File
Progress
Firmware Update
Firmware File
Progress
Notice
Update Successfully

Switch on:
Press and hold the Power button.
LED flashes in Red.
Switch off:
Press and hold the Power button.
LED flashes in Red & Purple.
Check the Power:
Press F button.
If there is a battery, LED flashes in Purple.

Charging:
Connect the charger.
LED flashes in BLUE & PURPLE.
(Fully charged: LED flashes in PURPLE)
GPS Transmission Failed :
LED flashes in BLUE for 5seconds.
LoRa Failed:
LED flashes in PURPLE for 5seconds.

SOS
: Press and Hold F Button.
LED flashes in RED for 5seconds.