Spacosa Gper Operating instructions

GPS Tracker
- GPER –
Manual scripts

LED Status 1.
Switch on:
Press and hold the Power button.
LED flashes in Red.
Switch off:
Press and hold the Power button.
LED flashes in Red & Purple.
Check the Power:
Press F button.
If there is a battery, LED flashes in Purple.

LED Status 2.
Charging:
Connect the charger.
LED flashes in BLUE & PURPLE.
(Fully charged: LED flashes in PURPLE)
GPS Transmission Failed :
LED flashes in BLUE for 5seconds.
LoRa Failed:
LED flashes in PURPLE for 5seconds.

LED Status 3.
SOS
: Press and Hold F Button.
LED flashes in RED for 5seconds.

Registering Gper on FAMY 1.
Run FAMY App
[To register Gper] Click
Select “Register Gper” Select the option

Press and hold Switch and
F buttons for 2seconds
Turn Gper on Searching for Gper
Registering Gper on FAMY 2.

Select a group
-Name the Gper
-Set the Password for Gper
(If you like to use Gper within multiple
groups, You must set the password.)
Check Gper number Gper is added to the group
You have selected
Registering Gper on FAMY 3.

Checking Gper on My FAMYRegistration Completed Gper Location
Registering Gper on FAMY 4.

Checking Gper with FAMY App 1.
Gper Location
Gper’s location
Address
Gper
Location History
Refresh
Satelite
Chat messenger
Enlarge the map
Gper Status:
Battery/Version
Dates:
10days of History
Street View

Checking Gper with FAMY App 2.
Downloading
Location History
Gper Profile Edit:
Name/Pictures/
Status
Auto Alerts:
Set the time for
location auto alerts