Teltonika FMB920 User manual

FMB920 User Manual
V0.27

2
Table of contents
1INTRODUCTION ..................................................................................................................... 9
1.1 ATTENTION............................................................................................................................ 9
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 9
1.3 LEGAL NOTICE...................................................................................................................... 10
1.4 ABOUT DOCUMENT ............................................................................................................... 10
2BASIC DESCRIPTION ............................................................................................................. 10
2.1 BASIC CHARACTERISTICS ......................................................................................................... 11
2.2 TECHNICAL FEATURES............................................................................................................. 12
2.3 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 13
2.4 ELECTRICAL CHARACTERISTICS.................................................................................................. 14
2.5 ABSOLUTE MAXIMUM RATINGS............................................................................................... 14
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 15
3.1 HOW TO INSERT SIM CARD INTO FMB920 DEVICE: .................................................................... 15
3.2 HOW TO ADD MICROSD CARD INTO FMB9XX DEVICE................................................................. 15
3.3 INSTALLING FMB920 DRIVERS ................................................................................................ 16
3.4 ACCESSORIES........................................................................................................................ 18
3.5 TERMINAL LOG FOR FMB DEVICES............................................................................................ 20
3.6 NAVIGATE LED..................................................................................................................... 21
3.7 STATUS LED ........................................................................................................................ 21
4OPERATIONAL BASICS.......................................................................................................... 22
4.1 OPERATIONAL PRINCIPALS....................................................................................................... 22
4.2 SLEEP MODES....................................................................................................................... 22
4.2.1 GPS Sleep mode...................................................................................................... 22
4.2.2 Deep Sleep mode .................................................................................................... 22
4.2.3 Online Deep Sleep mode......................................................................................... 23
4.3 VIRTUAL ODOMETER.............................................................................................................. 23
4.4 FEATURES............................................................................................................................ 24
4.4.1 ECO driving/Green driving Scenarios...................................................................... 24
4.4.2 Over Speeding Scenario. ......................................................................................... 25
4.4.3 Jamming detection ................................................................................................. 25
4.4.4 Trip.......................................................................................................................... 25
4.4.5 DOUT Control Via Call............................................................................................. 25
4.5 GPS FUEL CONSUMPTION ...................................................................................................... 26
4.6 SCENARIOS ACCELEROMETER................................................................................................... 26
4.6.1 Excessive Idling ....................................................................................................... 26
4.6.2 Unplug Detection.................................................................................................... 26
4.6.3 Towing Detection.................................................................................................... 26
4.6.4 Crash Detection ...................................................................................................... 26
4.7 BLUETOOTH......................................................................................................................... 26
5CONFIGURATION ................................................................................................................. 27
5.1 CONFIGURATOR.................................................................................................................... 27
5.1.1 Main Buttons description: ...................................................................................... 28
5.1.2 Keyword SMS (GPRS) commands: .......................................................................... 28
5.1.3 Keyword configuration with TCP ............................................................................ 28
5.2 STATUS INFO........................................................................................................................ 29
5.3 SECURITY INFO ..................................................................................................................... 29
5.4 SYSTEM SETTINGS.................................................................................................................. 29
5.5 RECORDS SETTINGS................................................................................................................ 32
5.6 GSM SETTINGS,GPRS PART................................................................................................... 32
5.7 GSM SETTINGS,SMS/CALL PART ............................................................................................ 33

3
5.8 GSM OPERATORS,ROAMING OPERATOR LIST,BLACKLIST OPERATOR LIST ....................................... 35
5.9 DATA ACQUISITION MODE SETTINGS ........................................................................................ 36
5.10 FEATURES SETTINGS............................................................................................................... 38
5.10.1 Green Driving.......................................................................................................... 39
5.10.1.1 Data output....................................................................................................................... 39
5.10.1.2 Auto Calibaration.............................................................................................................. 40
5.10.2 Over Speeding......................................................................................................... 40
5.10.3 Excessive Idling ....................................................................................................... 40
5.10.4 Jamming ................................................................................................................. 40
5.10.5 Use authorized numbers to control DOUT via call................................................. 41
5.10.6 Trip settings ............................................................................................................ 41
5.10.7 DOUT control depending on functionality priority ................................................. 43
5.11 AUTOGEOFENCING SETTINGS .................................................................................................. 44
5.12 MANUAL GEOFENCE.............................................................................................................. 45
5.13 GPS FUEL COUNTER.............................................................................................................. 46
5.14 SCENARIOS ACCELEROMETER................................................................................................... 47
5.14.1 Unplug Detection.................................................................................................... 47
5.14.2 Towing Detection.................................................................................................... 47
5.14.3 Crash Detection ...................................................................................................... 48
5.15 BLUETOOTH......................................................................................................................... 50
5.15.1 General functionality .............................................................................................. 50
5.16 HOW TO CONNECT BLUETOOTH HANDS FREE ADAPTER TO FMB DEVICE.......................................... 52
5.16.1 Bluetooth settings configuration ............................................................................ 52
5.16.2 Connecting Bluetooth Hands Free adapter ............................................................ 54
5.17 DEVICE’S LOG USING YOUR MOBILE PHONE................................................................................. 54
5.18 DEVICE DEBUG OVER ANDROID SMARTPHONE............................................................................. 55
5.19 HOW TO CONNECT OBD II BLUETOOTH DONGLE TO FMB DEVICE.................................................. 57
5.19.1 Bluetooth settings configuration ............................................................................ 57
5.19.2 Connecting to Bluetooth OBD II dongle .................................................................. 58
5.19.3 Supported Bluetooth OBD II dongles ...................................................................... 59
5.20 SMS EVENTS........................................................................................................................ 59
5.21 I/O SETTINGS....................................................................................................................... 61
5.21.1 Operand On Exit ..................................................................................................... 61
5.21.2 Operand On Entrance ............................................................................................. 62
5.21.3 Operand On Both.................................................................................................... 62
5.21.4 Operand Monitoring............................................................................................... 62
5.21.5 Operand On Hysteresis ........................................................................................... 62
5.21.6 Operand On Change ............................................................................................... 63
5.21.7 Operand On Delta Change...................................................................................... 63
5.21.8 Avg const (Averaging parameter description)........................................................ 63
5.22 ALL I/O ELEMENTS DESCRIPTION.............................................................................................. 64
5.22.1 Permamaent I/O elements ..................................................................................... 64
6SMS COMMAND LIST ........................................................................................................... 65
6.1 SMS COMMAND LIST............................................................................................................. 65
6.1.1 getinfo .................................................................................................................... 67
6.1.2 getver ..................................................................................................................... 68
6.1.3 getstatus................................................................................................................. 68
6.1.4 getgps..................................................................................................................... 68
6.1.5 getio........................................................................................................................ 69
6.1.6 ggps ........................................................................................................................ 69
6.1.7 readio #................................................................................................................... 69
6.1.8 getparam................................................................................................................ 69
6.1.9 setparam ................................................................................................................ 69
6.1.10 flush #,#,#,#,#,#,# ................................................................................................... 70
6.1.11 countrecs ................................................................................................................ 70
6.1.12 deleterecords .......................................................................................................... 70
6.1.13 setdigout................................................................................................................. 70

4
6.1.14 battery .................................................................................................................... 70
6.1.15 fc_reset ................................................................................................................... 71
6.1.16 towingreact ............................................................................................................ 71
6.1.17 odoset:#.................................................................................................................. 71
6.1.18 odoget .................................................................................................................... 71
6.1.19 btgetlist #................................................................................................................ 71
6.1.20 obdinfo ................................................................................................................... 71
6.1.21 faultcodes ............................................................................................................... 72
6.1.22 setkey # #................................................................................................................ 72
6.1.23 delkey # #................................................................................................................ 72
6.1.24 log2sd #,#,#,# ......................................................................................................... 72
6.1.25 bbread # ................................................................................................................. 73
6.1.26 bbinfo #................................................................................................................... 73
6.1.27 sdformat ................................................................................................................. 73
7PARAMETER LIST ................................................................................................................. 73
7.1 SYSTEM PARAMETERS ............................................................................................................ 73
7.1.1 Sleep Mode (ID=102) .............................................................................................. 73
7.1.2 Sleep timeout (ID=103) ........................................................................................... 74
7.1.3 Movement Source (ID=100).................................................................................... 74
7.1.4 Static Navigation (ID=106) ..................................................................................... 74
7.1.5 Static Navigation Settings (ID=112)........................................................................ 74
7.1.6 Saving/Sending without time synchronization (ID=107) ........................................ 74
7.1.7 GNSS Source (ID=109)............................................................................................. 75
7.1.8 Ignition settings (ID=101) ....................................................................................... 75
7.1.9 High voltage level (ID=104) .................................................................................... 76
7.1.10 Low voltage level (ID=105) ..................................................................................... 76
7.1.11 Movement Start Delay(s) (ID=19001)..................................................................... 76
7.1.12 Movement Stop Delay(s) (ID=19002) ..................................................................... 76
7.1.13 Led indication (ID=108)........................................................................................... 77
7.1.14 Synchronization settings (ID=900) .......................................................................... 77
7.1.15 NTP Resync (ID=901)............................................................................................... 77
7.1.16 NTP server 1 (ID=902)............................................................................................. 77
7.1.17 NTP server 2 (ID=903)............................................................................................. 77
7.1.18 Battery charge mode (ID=110) ............................................................................... 78
7.2 RECORDS PARAMETERS .......................................................................................................... 78
7.2.1 Sorting (ID=1002) ................................................................................................... 78
7.2.2 Open Link Timeout (ID=1000) ................................................................................. 78
7.2.3 Server Response Timeout (ID=1001)....................................................................... 78
7.3 GPRS PARAMETERS .............................................................................................................. 79
7.3.1 GPRS content activation (ID=2000)....................................................................... 79
7.3.2 APN Name (ID=2001)............................................................................................ 79
7.3.3 APN username (ID=2002) ..................................................................................... 79
7.3.4 APN Password (ID=2003) ...................................................................................... 79
7.3.5 Domain (ID=2004) .................................................................................................. 80
7.3.6 Target Server Port (ID=2005).................................................................................. 80
7.3.7 Protocol (ID=2006)................................................................................................ 80
7.3.8 Backup Server Domain (ID=2007)........................................................................... 80
7.3.9 Backup Server Port (ID=2008)................................................................................. 80
7.3.10 Backup Server Protocol (ID=2009) ........................................................................ 81
7.3.11 Backup Server Mode (ID=2010) ............................................................................ 81
7.4 SMS/CALL SETTINGS............................................................................................................. 81
7.4.1 SMS data sending settings (ID=3000)..................................................................... 81
7.4.2 Data send number (ID=3001) ................................................................................. 81
7.4.3 Authorized phone numbers (ID=4000-4009) .......................................................... 81
7.4.4 GSM Predefined Numbers (ID=6000-6009) ............................................................ 82
7.4.5 SMS Login (ID=3003) .............................................................................................. 82
7.4.6 SMS Password (ID=3004)........................................................................................ 82

5
7.4.7 Incoming call action (ID=3005)............................................................................... 83
7.4.8 SMS Event Time Zone (ID=3006)............................................................................. 83
7.4.9 Hands Free Call Settings (ID=3007) ........................................................................ 83
7.4.10 GSM number index (ID=3008) ................................................................................ 83
7.4.11 Roaming Operator List (ID=5000-5049) ................................................................. 83
7.4.12 Black List (ID=5500-5549)....................................................................................... 84
7.5 DATA ACQUISITION MODES PARAMETERS.................................................................................. 84
7.5.1 Home Network GSM operator code “Vehicle on STOP” parameters...................... 84
7.5.1.1 Min Period (ID=10000)........................................................................................................ 84
7.5.1.2 Min Saved Records (ID=10004)........................................................................................... 84
7.5.1.3 Send Period (ID=10005)...................................................................................................... 84
7.5.2 Home Network GSM operator code “Vehicle MOVING” parameters ..................... 84
7.5.2.1 Min Period (ID=10050)........................................................................................................ 84
7.5.2.2 Min Distance (ID=10051) .................................................................................................... 85
7.5.2.3 Min Angle (ID=10052)......................................................................................................... 85
7.5.2.4 Min Speed Delta (ID=10053)............................................................................................... 85
7.5.2.5 Min Saved Records (ID=10054)........................................................................................... 86
7.5.2.6 Send Period (ID=10055)...................................................................................................... 86
7.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 86
7.5.3.1 Min Period (ID=10100)........................................................................................................ 86
7.5.3.2 Min Saved Records (ID=10104)........................................................................................... 86
7.5.3.3 Send Period (ID=10105)...................................................................................................... 87
7.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 87
7.5.4.1 Min Period (ID=10150)........................................................................................................ 87
7.5.4.2 Min Distance (ID=10151) .................................................................................................... 87
7.5.4.3 Min Angle (ID=10152)......................................................................................................... 87
7.5.4.4 Min Speed Delta (ID=10153)............................................................................................... 88
7.5.4.5 Min Saved Records (ID=10154)........................................................................................... 88
7.5.4.6 Send Period (ID=10155)...................................................................................................... 88
7.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 88
7.5.5.1 Min Period (ID=10200)........................................................................................................ 88
7.5.5.2 Min Saved Records (ID=10204)........................................................................................... 89
7.5.5.3 Send Period (ID=10205)...................................................................................................... 89
7.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 89
7.5.6.1 Min Period (ID=10250)........................................................................................................ 89
7.5.6.2 Min Distance (ID=10251) .................................................................................................... 89
7.5.6.3 Min Angle (ID=10252)......................................................................................................... 90
7.5.6.4 Min Speed (ID=10253) ........................................................................................................ 90
7.5.6.5 Min Saved Records (ID=10254)........................................................................................... 90
7.5.6.6 Send Period (ID=10255)...................................................................................................... 90
7.6 FEATURES PARAMETERS ......................................................................................................... 91
7.6.1 Green driving parameters....................................................................................... 91
7.6.1.1 Green driving priority (ID=11000)....................................................................................... 91
7.6.1.2 Max Acceleration Force (ID=11004) ................................................................................... 91
7.6.1.3 Max Braking Force (ID=11005)............................................................................................ 92
7.6.1.4 Max Cornering (ID=11006).................................................................................................. 92
7.6.1.5 Green/Eco driving (ID=11007) ............................................................................................ 93
7.6.1.6 Green driving digital output control settings (ID=11003) ................................................... 93
7.6.1.7 Green driving Digital output on duration (ID=11001)......................................................... 94
7.6.1.8 Green driving Digital output off duration (ID=11002) ........................................................ 94
7.6.1.9 Green driving Send SMS to (ID=7034) ................................................................................ 94
7.6.1.10 Green driving SMS text (ID=8034) .................................................................................... 95
7.6.2 Overspeeding scenario parameters........................................................................ 95
7.6.2.1 Overspeeding priority (ID=11100) ...................................................................................... 95
7.6.2.2 Max allowed Speed (ID=11104).......................................................................................... 96
7.6.2.3 Overspeeding output control (ID=11103)........................................................................... 96
7.6.2.4 Overspeeding Digital output on duration (ID=11101) ........................................................ 97
7.6.2.5 Overspeeding Digital output off duration (ID=11102)........................................................ 97
7.6.2.6 Overspeeding Send SMS To (ID=7032) ............................................................................... 97
7.6.2.7 Overspeeding SMS Text (ID=8032) ..................................................................................... 98
7.6.3 Jamming scenario parameters ............................................................................... 98
7.6.3.1 Jamming priority (ID=11300) .............................................................................................. 98

6
7.6.3.2 Jamming Eventual records (ID=11303) ............................................................................... 99
7.6.3.3 Jamming Output Control (ID=11304).................................................................................. 99
7.6.3.4 Time Until Jamming Event Detection(ID=11305)................................................................ 99
7.6.3.5 Jamming DOUT on duration [ms] (ID=11301)................................................................... 100
7.6.3.6 Jamming DOUT off duration [ms] (ID=11302) .................................................................. 100
7.6.4 Trip scenario parameters...................................................................................... 100
7.6.4.1 Trip priority (ID=11800) .................................................................................................... 100
7.6.4.2 Eventually Records (ID=11801)......................................................................................... 101
7.6.4.3 Trip mode (ID=11802)....................................................................................................... 101
7.6.4.4 Start Speed (ID=11803)..................................................................................................... 101
7.6.4.5 Ignition Off Timeout (ID=11804)....................................................................................... 102
7.6.4.6 Eco Score allowed events (ID=700)................................................................................... 102
7.6.4.7 Trip Send SMS To (ID=7031) ............................................................................................. 102
7.6.4.8 Trip SMS Text (ID=8031) ................................................................................................... 103
7.6.4.9 Odometer distance calculation source (ID=11806) .......................................................... 103
7.6.4.10 Total Odometer value (11807)........................................................................................ 103
7.6.5 DOUT control via call scenario parameters .......................................................... 104
7.6.5.1 Digital Output control (ID=12000) .................................................................................... 104
7.6.5.2 DOUT deactivation (ID=12001)......................................................................................... 104
7.6.5.3 Duration timeout (ID=12002) ........................................................................................... 104
7.7 AUTOGEOFENCING SCENARIO PARAMETERS ............................................................................. 104
7.7.1 AutoGeofencing priority (ID=20000) .................................................................... 104
7.7.2 Eventual Records (ID=20002) ............................................................................... 105
7.7.3 Activation Timeout (ID=20003) ............................................................................ 105
7.7.4 Deactivate by (ID=20005) ..................................................................................... 105
7.7.5 AutoGeofence event generating (ID=20001) ........................................................ 106
7.7.6 Radius (ID=20004) ................................................................................................ 106
7.7.7 AutoGeofence Send SMS to (ID=7030) ................................................................. 106
7.7.8 SMS Text (ID=8030) .............................................................................................. 107
7.8 MANUAL GEOFENCE............................................................................................................ 107
7.8.1 First Geozone parameters .................................................................................... 107
7.8.1.1 #1 Geozone Manual Geofencing priority (ID=20100) ....................................................... 107
7.8.1.2 #1 Geozone Manual Geofence event generating (ID=20101)........................................... 108
7.8.1.3 #1 Geozone Eventual Records (ID=20102)........................................................................ 108
7.8.1.4 #1 Geozone Frame border (ID=20103) ............................................................................. 109
7.8.1.5 #1 Geozone Shape type (ID=20104) ................................................................................. 109
7.8.1.6 #1 Geozone Radius (ID=20105)........................................................................................ 110
7.8.1.7 #1 Geozone X1 (ID=20106) ............................................................................................... 110
7.8.1.8 #1 Geozone Y1 (ID=20107) ............................................................................................... 111
7.8.1.9 #1 Geozone X2 (ID=20108) ............................................................................................... 111
7.8.1.10 #1 Geozone X1 (ID=20109) ............................................................................................. 112
7.8.1.11 #1 Geozone OverSpeeding (ID=20110)........................................................................... 112
7.8.1.12 #1 Geozone Max allowed speed (ID=20111) .................................................................. 113
7.8.2 Other Geozones .................................................................................................... 113
7.8.2.1 Send sms to #1-5 Geozone (ID=7025-7029), #6-50 Geozone (ID=7071-7115)................. 114
7.8.2.2 SMS Text #1-5 Geozone (ID=8025-8029), #6-50 Geozone (ID=8071-8115) ..................... 114
7.9 GPS FUEL COUNTER ............................................................................................................ 114
7.9.1 City Consumption L/100km (ID=11900)................................................................ 114
7.9.2 Highway Consumption L/100km (ID=11901)....................................................... 115
7.9.3 Average Consumption L/100km (ID=11902)........................................................ 115
7.9.4 City Speed [km/h] (ID=11903) .............................................................................. 116
7.9.5 Highway Speed [km/h] (ID=11904) ...................................................................... 116
7.9.6 Average Speed [km/h] (ID=11905) ....................................................................... 117
7.9.7 Correction coefficient (ID=11906)......................................................................... 117
7.9.8 Fuel Consumption on Idling [L/h] (ID=11907)....................................................... 118
7.9.9 Higher Speeds Add [%] (ID=11908)....................................................................... 118
7.9.10 Highway Consumption every km/h (ID=11909).................................................... 119
7.10 SCENARIOS ACCELEROMETER................................................................................................. 119
7.10.1 Unplug Detection.................................................................................................. 119
7.10.1.1 Scenario settings (ID=11500).......................................................................................... 119
7.10.1.2 Eventual records (ID=11501) .......................................................................................... 119

7
7.10.1.3 Unplug detection mode (ID=11502) ............................................................................... 120
7.10.1.4 Unplug send sms to (ID=7067)........................................................................................ 120
7.10.1.5 SMS Text (ID=8067) ........................................................................................................ 120
7.10.2 Towing Detection.................................................................................................. 120
7.10.2.1 Scenario setting (ID=11600)............................................................................................ 120
7.10.2.2 Eventual Records (ID=11601)......................................................................................... 121
7.10.2.3 Activation Timeout (min) (ID=11602) ............................................................................. 121
7.10.2.4 Event Timeout (s) (ID=11603)......................................................................................... 121
7.10.2.5 Towing Make Call(Sms Event Number ID) (ID=11604).................................................... 122
7.10.2.6 Treshold (mg) (ID=11605)............................................................................................... 122
7.10.2.7 Angle (deg) (ID=11606)................................................................................................... 123
7.10.2.8 Duration (msec) (ID=11607) ........................................................................................... 123
7.10.2.9 Towing Send SMS (ID=7066)........................................................................................... 123
7.10.2.10 SMS Text (ID=8066) ...................................................................................................... 124
7.10.3 Crash Detection .................................................................................................... 124
7.10.3.1 Scenario settings (ID=11400).......................................................................................... 124
7.10.3.2 Duration [ms] (ID=11401) ............................................................................................... 124
7.10.3.3 Treshold [mG] (ID=11402) .............................................................................................. 124
7.10.3.4 Crash trace (ID=11406) ................................................................................................... 125
7.10.3.5 Crash sms send to (ID=7068) .......................................................................................... 125
7.10.3.6 SMS Text (ID=8068) ........................................................................................................ 125
7.10.4 Excessive idling ..................................................................................................... 125
7.10.4.1 Excessive idling priority (ID=11200)................................................................................ 125
7.10.4.2 Eventual records (ID=11203) .......................................................................................... 126
7.10.4.3 Excessive idling minimum stop duration (ID=11205)...................................................... 126
7.10.4.4 Excessive idling minimum move duration (ID=11206).................................................... 127
7.10.4.5 Excessive idling output control (ID=11204) .................................................................... 127
7.10.4.6 Excessive idling output on duration (ID=11201) ............................................................. 128
7.10.4.7 Excessive idling output off duration (ID=11202)............................................................. 128
7.10.4.8 Excessive idling Send SMS To (ID=7033)......................................................................... 129
7.10.4.9 Excessive idling SMS Text (ID=8033)............................................................................... 129
7.11 BLUETOOTH....................................................................................................................... 130
7.11.1.1 BT Radio (ID=800) ........................................................................................................... 130
7.11.1.2 Local name (ID 801) ........................................................................................................ 130
7.11.1.3 Local PIN (ID=802)........................................................................................................... 130
7.11.1.4 Security mode (ID=803) .................................................................................................. 131
7.11.1.5 External MAC (ID=804) ................................................................................................... 131
7.11.1.6 External name (ID=805) .................................................................................................. 131
7.11.1.7 External PIN (ID=806)...................................................................................................... 131
7.11.1.8 Connection mode (ID=807)............................................................................................. 132
7.11.1.9 Authorized devices MAC list (ID=830 - 834) ................................................................... 132
7.12 I/O PARAMETERS................................................................................................................ 132
7.12.1 I/O#1 property parameter priority Ignition (ID=50000) ....................................... 132
7.12.2 I/O#1 operand (ID=50001).................................................................................... 133
7.12.3 I/O#1 High level (ID=50002) ................................................................................. 133
7.12.4 I/O#1 Low level (ID=50003) .................................................................................. 133
7.12.5 I/O#1 Event only (ID=50004) ................................................................................ 134
7.12.6 I/O#1 averaging length (ID=50005)...................................................................... 134
7.12.7 I/O#1 send SMS (ID=7000).................................................................................... 134
7.12.8 I/O#1 SMS text (ID=8000)..................................................................................... 135
7.12.9 I\O elements parameters and types. .................................................................... 135
7.13 OBD II (BLUETOOTH).......................................................................................................... 140
7.13.1 1st OBD II (Bluetooth) property parameter priority (ID=40100)............................ 140
7.13.2 1st OBD II (Bluetooth) property parameter operand (ID=40101) .......................... 140
7.13.3 1st OBD II (Bluetooth) property parameter High level (ID=40102)........................ 141
7.13.4 1st OBD II (Bluetooth) property parameter Low level (ID=40103)......................... 141
7.13.5 1st OBD II (Bluetooth) property parameter Event only (ID=40104) ....................... 141
7.13.6 1st OBD II (Bluetooth) property parameters Send SMS to (ID=7038) ................... 142
7.13.7 1st OBD II (Bluetooth) property parameters SMS Text (ID=8038) ........................ 142
7.13.8 All OBD II (Bluetooth) I/O elements parameters property ID ............................... 143
8MOUNTING RECOMMENDATIONS ..................................................................................... 144

8
8.1 CONNECTING WIRES............................................................................................................ 144
8.2 CONNECTING POWER SOURCE............................................................................................... 144
8.3 CONNECTING IGNITION WIRE................................................................................................ 144
8.4 CONNECTING GROUND WIRE................................................................................................ 144
9FMB920 INSTALLATION INSTRUCTION ............................................................................... 146
10 EC DECLARATION OF CONFORMITY ............................................................................... 147
11 CHANGE LOG ................................................................................................................. 149

9
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
1.2 Instructions of safety
This chapter contains information on how to operate FMB920 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses SELV limited power source. The nominal voltage is 12 V DC. The allowed
range of voltage is 6 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FMB920 device in an impact-
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
When connecting the connection (1x5) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 1x5 connection must be disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.
The device FMB920 is not designed as a navigational device for boats.

10
1.3 Legal Notice
Copyright © 2016 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FMB920 device.
Acronyms and terms used in document:
PC –Personal Computer;
GPS –Global Positioning System;
GPRS –General Packet Radio Service;
GNSS –Global Navigation Satellite System ;
GSM –Global System for Mobile Communications;
SMS –Short Message Service;
AC/DC –Alternating Current/Direct Current;
I/O –Input/Output;
Record –AVL data stored in FMB920 memory. AVL data contains GNSS and I/O
information;
AVL packet - data packet which is being sent to the server during data transmission.
2BASIC DESCRIPTION
FMB920 is tracking terminal with GNSS and GSM connectivity, which is able to collect
device coordinates and transfer them via GSM network to server. This device is perfectly suitable
for applications, which need location acquirement of remote objects.
Package contents
1
The FMB920 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
Already implemented FMB920 device into case;
Top and bottom device cover parts;
Input and output power supply cable with a 1x5 connection pins, which is already installed
into device.
1
Package content depends on Order Code, and can be customized by customer needs.

11
2.1 Basic characteristics
GSM / GPRS / GNSS features:
Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
GPRS class 12;
SMS (text, data).
Integrated GNSS receiver
Up to -162 dBm GNSS receiver sensitivity.
Hardware features:
Built-in movement sensor;
Built-in Bluetooth 3.0;
Internal High Gain GNSS antenna;
Internal High Gain GSM antenna;
microSD card reader (up to 32Gb, FAT32);
170 mAh Li-ion rechargeable 3.7 V battery.
Interface features:
Power supply: 6 ÷ 30V;
1 digital input;
1 analog input;
1 open collector digital output (connecting external relays, LED, buzzers etc.);
2 LEDs indicating device status.
Special features:
Fast position fix;
High Quality track even in high density urban canyon;
Ultra small case;
Ready for harsh environment;
Color ribbon non-detachable cable;
Easy to mount in limited access areas;
Firmly fasten;
High gain internal GNSS and GSM antennas;
2 LED status indication;
Real-Time tracking;
Smart data acquisition based on:
oTime;
oAngle;
oDistance;
oIgnition or any other I/O event;
Sending acquired data via GPRS;
GPRS and SMS I/O events;
Virtual odometer;
Jamming detection
Configurable using Secured SMS Commands;
Overvoltage protection.

12
Table 1 FMB920 Supply voltage
Description
Voltage
Duration
Normal operation
10-30V
Unlimited
Protection turns on, device turns off
34V
Unlimited
Maximum voltage
<70V
Unlimited
Maximum voltage impulse
90V
5 milliseconds
2.2 Technical features
Table 1. FMB920 specifications
Part name
Physical specification
Technical details
Navigation LED
LED
Power supply 6...30 V DC
2 W Max
Energy consumption1:
GPRS: 60 mA r.m.s Max.,
Nominal: average 27 mA r.m.s,
Nominal while charging: 120mA
r.m.s.
GPS Sleep: average 11 mA,
Deep Sleep: average 3 mA2
Online Sleep: average 16.7 mA,
Battery charge current:
average 140 mA,
Rated current:
250 mA,
Operation temperature:
-25 ⁰C ... +55 ⁰C
Storage temperature:
-40⁰C ... +70 ⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Internal fuse: 3A, 125V
Weight: 54 g.
Modem LED
LED
Socket
Soldered inner socket
USB
Micro USB socket
2
1Energy consumption has been tested at 12V voltage with no battery charging.
2When in Deep Sleep mode no data storing and sending is activated.

13
Figure 1 FMB920 view & dimensions (tolerance ±2mm)
2.3 Technical Information about internal battery
Table 2. Li-Polymer rechargeable battery, 3.7 V, 170 mAh..
Internal back-up
battery
Battery voltage V
Nominal capacity (mAh)
Power(Wh)
Charging temperature
°C
Li-Polymer
rechargeable
battery
3.75～3.90
≥170
0.64 - 66
0 –45
FMB920 internal battery is used for detecting external voltage disconnection.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery Disposal instructions:
Battery should not be disposed of with general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose
them to battery recycle bin found in stores.

14
2.4 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
10
30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
μA
Drain current (Digital Output ON,
Recommended Operating Conditions)
3,3
mA
Static Drain-Source resistance (Digital
Output ON)
300
mΩ
Digital Input:
Input resistance (DIN1)
47
kΩ
Input Voltage (Recommended Operating
Conditions)
0
Supply
voltage
V
Input Voltage threshold (DIN1)
2,5
V
Analog Input:
Input Voltage (Recommended Operating
Conditions)
0
30
V
Input resistance
150
kΩ
Measurement error on 12V
0,9
%
Additional error on 12 V
108
mV
Measurement error on 30 V
0,33
%
Additional error on 30 V
88
mV
2.5 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-32
32
V
Drain-Source clamp threshold voltage (Absolute
Maximum Ratings), (Idrain = 2mA)
36
V
Digital Input Voltage (Absolute Maximum Ratings)
-32
32
V
Analog Input Voltage (Absolute Maximum Ratings)
-32
32
V

15
3CONNECTION, PINOUT, ACCESSORIES
3.1 How to insert SIM card into FMB920 device:
Remove FMB920 cover
Insert SIM card as shown
Attach cover

Device is ready
Note: SIM card insertion/removal must be performed when FMB device is
powered off –external voltage and battery disconnected. Otherwise SIM card
might be damaged or FMB device will not detect it.
3.2 How to add MicroSD card into FMB9XX device

Push MicroSD
card lock case
②Open
MicroSD card
locker
③Correctly
insert microSD card
into slot
`
④ Close microSD
card locker

16
⑤Push microSD card lock case to locked position
3.3 Installing FMB920 drivers
Table 3. Software requirements:
Operating system
(OS)
Version
MS .NET Framework version
Windows XP with
SP3 or later
32 bit and
64 bit
32 bit
64 bit
MS .NET Framework 4
https://www.microsoft.com/en-
US/Download/confirmation.aspx?id=17718
http://avl1.teltonika.lt/downloads/software/Framework/.NET%20F
ramework%204/dotNetFx40_Full_x86_x64.exe
With MS .NET Framework 4 update KB2468871-v2 update
https://www.microsoft.com/en-us/download/details.aspx?id=3556
http://avl1.teltonika.lt/downloads/software/Framework/.NET%20F
ramework%204%20update%20KB2468871-v2/
NDP40-KB2468871-v2-x86.exe
NDP40-KB2468871-v2-x64.exe or NDP40-KB2468871-v2-IA64.exe
Windows Vista
Windows 7
Windows 8.1
Windows 10
32 bit and
64 bit
MS .NET Framework 4.6.2
https://www.microsoft.com/en-
us/download/confirmation.aspx?id=53344
http://avl1.teltonika.lt/downloads/software/Framework/.NET%20F
ramework%204.6.2/NDP462-KB3151800-x86-x64-AllOS-ENU.exe
Drivers:
Please download COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FMB9XY/MS_USB_ComPort_Driver_exe_v1.1032.3.zip
Installing drivers:
Extract and run FP_INBOX_InstallDriver_v1.1032.3.exe. This driver is used to detect FMB920
device connected to the computer. Click 'Next' in driver installation window (figures below):

17
Figure 2 Driver installation window
This will launch device driver installation wizard. In the following window click ‘Install’
button:
Figure 3 Driver installation window
Setup will continue installing drivers and will display a window about successful process at
the end. Click 'Finish' to complete setup:

18
Figure 4 Driver installation window
You have now installed drivers for FMB920 device successfully.
Table 4 FMB920 pinout description
Pin
Nr.
Pin Name
Description
1
VCC (1030)V DC (+)
Power supply for module. Power supply range (6...30) V DC (+)
2
GND(VCC(1030)V DC)(-)
Ground pin. (630)V DC (―)
3
DIN 1
Digital input, channel 1. DEDICATED FOR IGNITION INPUT
4
AIN 1
Analog input, channel 1. Input range: 0-30V DC
5
OUT 1
Digital output, channel 1. Open collector output. Max. 3,3 A.
3.4 Accessories
Note: Accessories are not included in device package, please order them
separately.
Alarm buttons, door sensors, etc.
Alarm buttons, door sensors, ignition, etc. return two states: high or low voltage. Digital
inputs are used to read this information. Figure below shows how to connect alarm button, door
sensor, etc.

19
Figure 5 Panic button connection
In cases when sensor output signal is negative, an additional relay has to be installed to
convert negative signal to positive.
Figure 6 Inverting relay connection
Immobilizer relay
When connected as shown below, FMB920 disables engine starter when output is ON.
More details about relays can be found below.
Figure 7 Immobilizer relay connection

20
Relays
An ordinary automotive relay is used to invert input signal or to immobilize engine starter.
Note, that they are available as 12 V or 24 V.
Figure 8 Automotive relay pinout
3.5 Terminal log for FMB devices
FMB device is able to transmit its current state when it
is connected to PC using USB cable. It is used to detect errors
and provide information for solution when device is operating
as unexpected. Required Terminal application can be
downloaded here:
http://avl1.teltonika.lt/Downloads/Software/Terminal.zip
After connecting FMB device to PC, it creates two ports:
MTK USB Debug Port –used for modem trace;
MTK USB Modem Port –used for Terminal log.
If connected FMB device is not recognized by PC, please
install apropriate drivers. Here is download link:
http://avl1.teltonika.lt/Downloads/FMB9XY/
After selecting your port (usually lower number port)
click connect and then click on ‘Start Log’ button. If log is not
running, please send .log:1 command (see picture below).