Quick Start Guide
1
1Unpack the Blower Vacuum
a) Open carton carefully and remove all items
b) Ensure you have all items (see above) before you discard the packaging
2Fuel / Lubrication
a) Mix the fuel in the mixer bottle provided
b) Shake the container gently to ensure that
it is properly mixed.
N.B Failure to use the correct oil/fuel mixture
will cause the engine to seize
3Starting the Blower Vac
a) Fit the Vacuum bag to the unit (see below)
b) Add the fuel to the Blower Vac
c) Switch Ignition to “I” (on)
d) Set Choke lever to ON
e) Secure throttle lever on
f) Push primer bubble 10 times
g) Pull starter cord rapidly 4 or 5 times
NOTE: amount of choke will vary slightly
Depending on the external temperature
h) Allow engine to warm up at half throttle for
a short time and then push the choke in fully
Items Included
2
Fuel Mixture is 40:1 (40 parts Fuel
to 1 part 2 stroke oil)
Use regular grade unleaded
petrol and quality 2 stroke oil
Fitting Vacuum bag
ENGINE WILL NOT START IF NOT FITTED
CORRECTLY
EH 09/2007
Choke Lever
Fit bag & connecting tube to unit
Slide Lever Forward
Ensure connecting tube is fitted
correctly in housing and engages
safety cut out switch.
Fuel Cap / tank
Starter Cord
Primer bubble
Ignition switch
3
4
5
Do you have questions?
We can help
Call Customer Service
Mon-Thur 08:45 am - 5:00 pm
Friday 08:45 am - 3:15 pm
岼
0151 649 1500
Spare Parts also available
1 Plug spanner
2 Mixing Bottle
3 Shoulder Strap
4 Collection bag
5 Head
