Specialised Covers tow pro + User manual

PRODUCT MANUAL
& FITTING GUIDE
TYPE: TAILORED FIT
–Customised colour panels
–QUICK ZIP SYSTEM to aid tting
–2 CLEAR EYES for caravan lights
–ELASTIC WINGS to aid
cover tension
–Storage bag
–1 Year manufacturing warranty
–Easy grab handle access
–Locker box access
–100% waterproof
& breathable fabric
–UV protected fabric
–Protects from stone chips
& cracked windows
–Prevents road dirt & exhaust
fume debris build up
–Protects from insect residue
–UK manufacture & support
EACH TOW PRO + COMES
WITH THE FOLLOWING:
FEATURES & BENEFITS
OF THE TOW PRO +:
IMPORTANT:
CARE INSTRUCTIONS
Before you t your new TOW PRO+
please ensure the front of your
caravan is clean and that dirt is not
trapped between the cover and the
caravan which could potentially cause
damage.
When cleaning the TOW PRO +
we advise, for best results and for the
long term benet of the product, that
you use a damp cloth in warm, mild
soapy water. Allow to dry naturally.
DO NOT CLEAN IN ANY WASHING
MACHINE OR DRY CLEAN.
To Protect & Preserve
specialisedcovers.com
T: 01943 864 646 E: [e-mail]
tow pro+
1
NEED HELP? CALL OUR EXPERTS FOR ASSISTANCE
Oce hours: Mon – Fri 9am – 5pm, Sat – Sun CLOSED

specialisedcovers.com
T: 01943 864 646 E: [email protected]
STEP 1
Place the Tow Pro + across the front of your caravan sitting across
the A-frame. On the near side of the caravan and from the bottom
feed the awning tape into the channel. Slowly begin to slide the
awning tape up the channel until the full length is tted.
STEP 2
Walk around to the oside of the caravan and undo the full height
zip. From the bottom feed the awning tape into the channel feeding
it to the top. Once fully in the channel zip up the open section.
Ensure the cut away A-frame section sits neatly over the A-frame.
STEP 4
Once the cover is in the correct position, pull the Quick Fit Clips
under the front of the caravan and secure in place.
STEP 5
The elasticated Quick Fit Clips are designed to clip under the
lip of the caravan as shown, and are designed to create tension
and prevent dirt getting underneath the cover.
STEP 6
Ensure that all of the cover’s zips are fastened and
secured by the Velcro®tabs.
STEP 3
Ensure that the cover sits straight and adjust accordingly so that the
caravan’s lights are clearly visible through the Clear Eyes. If required
ensure the awning stoppers have been tted at this point.
FITTING THE COVER
3

STEP 7
It is extremely important that when fastening the A-frame
strap that it is passed OVER the brake cable. This ensures that it
doesn’t aect the safety of the vehicles when towing.
STEP 8
Once the strap is safely in place over the A-frame, simply fasten
the top buckles and adjust, be careful not to over tighten the straps.
Place excess webbing through slides. You are now ready to tow!
STEP 3
Once the cover is completely removed hold it out straight or lay
across the front of the caravan and fold. Ensure that the eecy
inner is on the outside and that the cover doesn’t touch the oor
to prevent any dirt coming into contact with it.
STEP 4
When folding ensure that the eecy inner of the fabric is on the
outside again to prevent any transfer of dirt from the outside of
the cover. The cover can now be placed back into its storage bag
ready for your next trip.
specialisedcovers.com
T: 01943 864 646 E: [e-mail]
FITTING THE COVER CONT.
STEP 2
Walk round to the near side and slide the awning tape out of the
channel fully. The cover should now be free of the caravan.
STEP 1
To remove the cover, unfasten the A-frame strap and unclip all
the Quick Fit Clips from under the caravan’s valance. Undo the
full height zip on the oside and remove the awning tape from
the channel. Then zip this section back up once detached from
the caravan.
REMOVING THE COVER
4
NEED HELP? CALL OUR EXPERTS FOR ASSISTANCE
Oce hours: Mon – Fri 9am – 5pm, Sat – Sun CLOSED

BEFORE FITTING YOUR
COVER PLEASE NOTE
Take a moment to familiarise yourself with the product.
IMPORTANT NOTICE
The caravan front must always be
clean and free from dirt/grit and
other road debris before tting
any Tow Pro product, if this is not
done properly damage may be caused
through abrasion to the caravan
front from trapped dirt between the
cover and caravan.
PLEASE NOTE
The Tow Pro cover range is designed
specically to protect your caravan
whilst being towed. It is not intended to
be used as a storage cover or to be left
axed to the caravan whilst it is being
stored. Please remove this cover once
you have reached your destination.
PRODUCT MANUAL
& FITTING GUIDE
2
NEED HELP? CALL OUR EXPERTS FOR ASSISTANCE
Oce hours: Mon – Fri 9am – 5pm, Sat – Sun CLOSED
On a number of Coachman caravans
there is an additional xing point. The
large ap located at the top of the cover,
hooks over the Coachman sign located
above the front window. Please see
image of how the cover should be tted.
This is not standard on all Coachman
covers. If you are unsure of how this
section is tted please contact our
customer service team.
– The cover does require two awning channels and an opening
on both sides to t the cover.
– When tting your Tow Pro + the front of the caravan
must be clean.
– On the oside of the cover undo the full height
zip to the bottom.
– Insert the o side awning tape in the channel rst
from the bottom and work your way up to the top.
– Please note; If your caravan does not have a bottom awning
access, your cover should be tted from the top and worked
down the awning channel.
– Two person tting is recommended but the product has been
designed so it can be tted by one person easily.
– It is important to remember the cover is held on through the
awning channels and clips, no further adhesion materials or
methods are necessary.
– To keep your Tow Pro + clean, sponge down with mild soapy
water.
– If your caravan does not have an awning stopper built in we will
supply them with the cover. These need to be tted into the
channel at the base where the cover naturally nishes.