Spectra IB906 User manual

IB906
Intel®Sandy Bridge / PCH
3.5-inch Disk Size SBC
USER’S MANUAL
Version 1.0

ii IB906 User’s Manual
Acknowledgments
AMI is a registered trademark of American Megatrends Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Intel® Sandy Bridge DC Mobile Processor are
registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Fintek is a registered trademark of Fintek Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.

IB906 User’s Manual iii
Table of Contents
Introduction...................................................... 1
Product Description............................................................1
Checklist.............................................................................2
IB906 Specifications ..........................................................3
Board Dimensions..............................................................4
Installations...................................................... 5
Installing the Memory.........................................................6
Setting the Jumpers.............................................................7
Connectors on IB906........................................................10
BIOS Setup.......................................................17
Drivers Installation......................................39
Appendix...........................................................47
A. I/O Port Address Map..................................................47
B. Interrupt Request Lines (IRQ)......................................48
C. Watchdog Timer Configuration...................................49

iv IB906 User’s Manual
This page is intentionally left blank.

INTRODUCTION
IB906 User’s Manual 1
Introduction
Product Description
The IB906 3.5-inch disk size SBC is based on the latest Intel®HM65
chipset. The platform supports 2nd generation Intel®Core processor
family with BGA1023 package and features an integrated one-channel
DDR3 memory controller as well as a graphics core.
The latest Intel®processors provide advanced performance in both
computing and graphics quality. This meets the requirement of customers
in the gaming, POS, digital signage and server market segment.
The Intel®HM65 is made with 32 nanometer technology that supports
Intel’s first processor architecture to unite the CPU and the graphics core
on the transistor level. The IB906 SBC utilizes the dramatic increase in
performance provided by this Intel’s latest cutting-edge technology.
Measuring 102mm x 148mm, IB906 offers fast 6Gbps SATA support (2
ports), USB3.0 (2 ports) and interfaces for, DVI-I, LVDS displays. IB906
features IntelActive Management Technology 7.0.
IB906 FEATURES:
Supports Intel®2nd Generation Celeron mobile processors
(BGA Type)
One DDR3 SoDIMM, 1066/1333MHz, Max. 8GB memory
Dual Intel®PCI-Express Gigabit LAN
Integrated Graphics for DVI-I/LVDS displays
2x SATA 3.0, 6x USB 2.0, USB 3.0 (2 ports),
2x COM, Watchdog timer
1x Mini PCI-E
Digital I/O, LPC/Smart battery interface/iSMART

INTRODUCTION
2 IB906 User’s Manual
Checklist
Your IB906 package should include the items listed below.
The IB906 3.5-inch disk size SBC
This User’s Manual
1 CD containing chipset drivers and flash memory utility
OptionalSATA-5; Audio-18; USB29; SATA-12; PK1-20B; PW87
cable
Optional HSIB906-BGA Heat Sink

INTRODUCTION
IB906 User’s Manual 3
IB906 Specifications
Product Name
IB906F
Form Factor
3.5” disk-size SBC
CPU Type
- Intel®2nd Generation Celeron mobile processor
- BGA1023 package size, 31 x 24 mm
- TDP = 10W [807UE]
CPU Speed
1GHz
Cache
1.5MB
CPU type
FCBGA1023 @ solder side
Chipset
Intel®BD82HM65 @ solder side
25 x 25 mm package size, TDP=3.9W
BIOS
AMI BIOS, support ACPI Function
Memory
Intel®2nd generation /Celeron mobile processor integrated
memory controller
DDRIII 1066/1333MHz SO-DIMM x1 (w/o ECC, 1.5V), Max.
8GB
VGA
Intel®2nd Gen. mobile processor integrated Gfx
DVI-I x 1 (thru Level shifter ASM1442) [Thru Digital Port B]
LVDS
24-bit dual channels LVDS interface w/DF13 socket x2
LAN
1. Intel® 82579V GbE PHY as 1st LAN
2. Intel®82583V PCIe GbE as 2nd LAN
USB
1. Intel®HM65 integrated USB 2.0 controller, supports 7ports:
2-port in the rear panel + 4-ports onboard pin header (DF11
connector)
2. USB 3.0 host controller [ASM1042], support 2ports in the
rear panel [Not support DOS boot function]
Serial ATA Ports
Intel®HM65 PCH built-in SATA controller, supports 2 x SATA
3.0 (6Gbps)
Audio
Intel®HM65 PCH built-in High Definition Audio controller +
Realtek ALC662, supports 5.1-channel
LPC I/O
Fintek F81866AD-I [128-pin LQFP, 14 mmx 14mm]COM1
(RS232 only)
COM2 (RS232/422/485) support ring-in with power
@500 mA (jumper selectable for 5V or 12V)
[Hardware Monitor]: 2x thermal inputs, 2x voltage monitoring,
1x fan speed DC control
Digital IO
4 in & 4 out
IAMT (7.0)
N/A
Expansion Slots
Mini PCI-e socket x 1, Full-sized type [USB device support]
Edge Connector
DVI-I x1, RJ45 x2 for LAN 1 & 2
USB 3.0 stack connector x 1 for USB1 ~2 [Blue color]
USB 2.0 stack connector x 1 for USB3 ~4

INTRODUCTION
4 IB906 User’s Manual
Onboard
Header/Connector
2 ports x SATA III [Blue color]
2x4 pins header x 2 for 4 USB 2.0 ports[DF11]
DF13-20 socket connector x 2 for 24-bit dual channel LVDS
2x6 pins box header x1 for Audio [DF11]
2x10 pins box header x 1 for COM1/ COM2 [DF11]
2x5 pins headers x 1 for LPC (Debug purpose only)
Mini PCI-e(1x) connector x 1 [Full-sized]
5 pins box header x 1 for smart battery
4 pins box header x 1 for backlight/brightness control
4 pins power connector x 1 for SATA HDD
2 pins power connector x 1 for DC-in [180 degree vertical type]
Watchdog Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
Power Connector
+12~+24V DC-in
Board Size
102mm x 147mm
[
Board Dimensions

INSTALLATIONS
IB906 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IB906 in order to set up a workable system. The topics
covered are:
Installing the Memory..........................................................................6
Setting the Jumpers..............................................................................7
Connectors on IB906.........................................................................10

INSTALLATIONS
6 IB906 User’s Manual
Installing the Memory
The IB906 board supports one DDR3 memory socket for a maximum
total memory of 4GB in DDR3 SO-DIMM memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligns
with that on the memory slot. Insert the module into the socket at a
slight angle (approximately 30 degrees). Note that the socket and
module are both keyed, which means that the module can be installed
only in one direction.
2. To seat the memory module into the socket, apply firm and even
pressure to each end of the module until you feel it slip down into the
socket.
3. With the module properly seated in the socket, rotate the module
downward. Continue pressing downward until the clips at each end
lock into position.
4. To remove the DDR3 module, press the clips with both hands.

INSTALLATIONS
IB906 User’s Manual 7
Setting the Jumpers
Jumpers are used on IB906 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IB906 and their respective functions.
Jumper Locations on IB906.................................................................8
JP6: COM2 RS232 RI/+5V/+12V Power Setting.................................9
J9: LCD Panel Power Selection ...........................................................9
J1: Flash Descriptor Security Overide (Factory use only) .....................9
J10: Clear CMOS Contents..................................................................9

INSTALLATIONS
8 IB906 User’s Manual
Jumper Locations on IB906
Jumpers on IB906...........................................................................Page
J1: Flash Descriptor Security Overide (Factory use only) .....................9
JP6: COM2 RS232 RI/+5V/+12V Power Setting................................. 9
J9: LCD Panel Power Selection ........................................................... 9
J10: Clear CMOS Contents..................................................................9

INSTALLATIONS
IB906 User’s Manual 9
J1: Flash Descriptor Security Override (Factory use only)
J1
Flash Descriptor
Security Override
Open
Disabled
(Default)
Close
Enabled
JP6: COM2 RS232 RI/+5V/+12V Power Setting
JP6
Setting
Function
Pin 1-2
Short/Closed
+12V
Pin 3-4
Short/Closed
RI
Pin 5-6
Short/Closed
+5V
J9: LCD Panel Power Selection
J9
LCD Panel Power
3.3V
5V
J10: Clear CMOS Contents
J10
Setting
Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS

INSTALLATIONS
10 IB906 User’s Manual
Connectors on IB906
CN6: USB2.0 Connector................................................................... 12
CN5: USB3.0 Connector................................................................... 12
CN3: Gigabit LAN (Intel 82583V) .................................................... 12
CN4: Gigabit LAN (Intel 82579LM).................................................. 12
CN7: DVI-I Connector..................................................................... 12
CN1, CN2: SATA Connectors........................................................... 12
JP2: HDD Power Connector.............................................................. 12
J2: Smart Battery Interface Connector ............................................... 13
J3: Front Panel Connector ................................................................. 13
JP3, JP4: USB3~USB6 Connector (DF11 Connector) ....................... 13
JP5: COM1, COM2 Serial Port (DF11 Connector) ............................ 14
JP7, JP9: LVDS1, LVDS2 Connectors (1st/2nd channel)................... 15
J8: LCD Backlight Connector (DC type) ........................................... 15
JP10: Digital I/O................................................................................ 15
J11: DC-IN +12V~24V Power Connector ......................................... 16
J13: Audio Connector (DF11 Connector) .......................................... 16
SYS_FAN1:DC-system Fan Power Connector.................................. 16
J5: Mini-PCIE Connector .................................................................. 16
JP8: LPC Debug Connector (Factory use only).................................. 16
JP1: SPI Flash Connector (Factory use only) ..................................... 16
J7: iSMART Flash Connector (Factory use only) ............................... 16

INSTALLATIONS
IB906 User’s Manual 11

INSTALLATIONS
12 IB906 User’s Manual
[
CN6: USB2.0 Connector
CN5: USB3.0 Connector
CN3: Gigabit LAN (Intel 82583V)
CN4: Gigabit LAN (Intel 82579LM)
CN7: DVI-I Connector
Signal Name
Pin #
Pin #
Signal Name
DATA 2-
1
16
HOT POWER
DATA 2+
2
17
DATA 0-
Shield 2/4
3
18
DATA 0+
DATA 4-
4
19
SHIELD 0/5
DATA 4+
5
20
DATA 5-
DDC CLOCK
6
21
DATA 5+
DDC DATA
7
22
SHIELD CLK
Anlog-Vsync
8
23
CLOCK -
DATA 1-
9
24
CLOCK +
DATA 1+
10
C1
Anlog-Red
SHIELD 1/3
11
C2
Anlog-Green
DATA 3-
12
C3
Anlog-Blue
DATA 3+
13
C4
Anlog-Hync
DDC POWER
14
C5
A GROUND2
A GROUND 1
15
C6
A GROUND3
CN1, CN2: SATA Connectors
JP2: HDD Power Connector
Pin #
Signal Name
1
+5V
2
Ground
3
Ground
4
+12V

INSTALLATIONS
IB906 User’s Manual 13
J2: Smart Battery Interface Connector
E-CALL 0110-161-050
Mating connector: JST PHR-5
Pin #
Signal Name
1
RST
2
EXTSMI
3
Ground
4
DATA
5
CLK
J3: Front Panel Connector
Signal Name
Pin #
Pin #
Signal Name
Power BTN
1
2
Power BTN
HDD LED+
3
4
HDD LED-
Reset BTN
5
6
Reset BTN
Power LED+
7
8
Power LED-
JP3, JP4: USB3~USB6 Connector (DF11 Connector)
Haoguo DF11-8S-PA66H
Mating connector: Hirose DF11-8DS-2C
Signal Name
Pin #
Pin #
Signal Name
Ground
2
1
Vcc
D4+
4
3
D3-
D4-
6
5
D3+
Vcc
8
7
Ground

INSTALLATIONS
14 IB906 User’s Manual
JP5: COM1, COM2 Serial Port (DF11 Connector)
Haoguo DF11-20S-PA66H
Mating connector: Hirose DF11-20DS-2C
Signal Name
Pin #
Pin #
Signal Name
DSR1
Data set ready
2
1
DCD1
Data carrier detect
RTS1
Request to send
4
3
RXD1
Receive data
CTS1
Clear to send
6
5
TXD1
Transmit data
RI1
Ringing indicator
8
7
DTR1
Data terminal ready
Not used
10
9
Ground
DSR2
12
11
DCD2
RTS2
14
13
RXD2
CTS2
16
15
TXD2
RI2
18
17
DTR2
Not used
20
19
Ground
C
COM2 is BIOS selectable for RS-232, RS-422 and RS-485.
Pin #
Signal Name
RS-232
R2-422
RS-485
11
DCD
TX-
DATA-
13
RX
TX+
DATA+
15
TX
RX+
NC
17
DTR
RX-
NC
19
Ground
Ground
Ground
12
DSR
NC
NC
14
RTS
NC
NC
16
CTS
NC
NC
18
RI
NC
NC
20
NC
NC
NC

INSTALLATIONS
IB906 User’s Manual 15
JP7, JP9: LVDS1, LVDS2 Connectors (1st/2nd channel)
Hirose DF13-20DP-1.25V
Mating connector: DF13-20DS-1.25C
Signal Name
Pin #
Pin #
Signal Name
TX0-
2
1
TX0+
Ground
4
3
Ground
TX1-
6
5
TX1+
*5V/3.3V
8
7
Ground
TX3-
10
9
TX3+
TX2-
12
11
TX2+
Ground
14
13
Ground
TXC-
16
15
TXC+
*5V/3.3V
18
17
ENABKL
+12V
20
19
+12V
* Remarks: These connectors support 24-bit.JP7 is 1st channel. JP9 is 2nd
channel. J9 can be used to set 1-2 3.3V or 2-3 5V.
J8: LCD Backlight Connector (DC type)
E-CALL 0110-161-040
Mating connector:JST PHR-4
Pin #
Signal Name
1
+12V
2
Backlight Enable
3
*Backlight Adj (DC type)
4
Ground
* LCD backlight brightness can be adjusted by the OS or in the BIOS setup. In the
BIOS setup, both backlight enable/disable and backlight brightness can be
configured. Also, the backlight voltage can be set to 3.3V or 5V.
JP10: Digital I/O
Signal Name
Pin #
Pin #
Signal Name
GND
1
2
VCC
OUT3
3
4
OUT1
OUT2
5
6
OUT0
IN3
7
8
IN1
IN2
9
10
IN0

INSTALLATIONS
16 IB906 User’s Manual
J11: DC-IN +12V~24V Power Connector
Haoguo WAFER396-2S-WV
Mating connector: JST VHR-2N
Pin #
Signal Name
1
DC in (+12~24V)
2
Ground
J13: Audio Connector (DF11 Connector)
Haoguo DF11-12S-PA66H
Mating connector: Hirose DF11-12DS-2C
Signal Name
Pin #
Pin #
Signal Name
LINEOUT_R
2
1
LINEOUT_L
Ground
4
3
JD_FRONT
LINEIN_R
6
5
LINEIN
Ground
8
7
JD_LINEIN
MIC-In
10
9
MIC_L
Ground
12
11
JD_MIC1
SYS_FAN1:DC-system Fan Power Connector
Pin #
Signal Name
1
Ground
2
+12V
3
Rotation detection
J5: Mini-PCIE Connector
JP8: LPC Debug Connector (Factory use only)
JP1: SPI Flash Connector (Factory use only)
J7: iSMART Flash Connector (Factory use only)