Spectrum 38983 User manual

0191440 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Tools
Required
6RU Rack Rail Kit
for Pivot Premier
38983
Phillips
Screwdriver
Figure 1
Shelf
(1) 0144237
Shelf
(4) 050881
“L” Bracket
(10) 0100167
8-32 x 1/2” PH
thread-cutting screw
1. Assemble rack cube
1. Attach the rails to the shelf with (10) 8-32 x 1/2” PH thread-
cutting screws. Note the orientation of the rails. Figure 1.
2. Attach each bracket to a rail as shown with (2) 1/4-20 x 1/2” PHM
screws, and (2) 1/4-20 Keps nuts.
3. Tighten all fasteners securely.
(4) 058516
Rack rail (10.5”)
(8) 0101382
#14 x 7/8” PHSM
(8) 035728
1/4-20 x 1/2” PHMS
(8) 0106543
1/4-20 Keps nut
Rack Rail “L” Bracket
(4 req’d)
Rack rail (10.5”)
(4 req’d)
1/4-20 Keps nut
(2 per)
1/4-20 x 1/2” PHMS
(2 per)
8-32 x 1/2” PH
thread-cutting screw
(10 req’d total)

0191440 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2019 Spectrum Industries Inc., All rights reserved.
2. Install rack assembly
1. Determine the preferred position of the rack assembly (left, centered, or right).
2. Using the corresponding pre-drilled mounting holes under the worksurface,
attach the rack assembly with (8) #14 x 7/8” PHSM screws. Figure 2.
(2 through each “L” bracket).
3. Tighten screws securely.
Note: On the 48”W lectern, the 55496 Keyboard tray
is not compatible with the 6RU Rack option. On the
60”W lectern, the keyboard tray is compatible with (1)
6RU rack option or (1) 38982 CPU sling.
(2) #14 x 7/8”
PHSM
Rack assembly
Figure 2