Speechi ST-SUP-MOB-002 User manual

INSTALLATION MANUAL
ST-SUP-MOB-002
15/11/2021 - ST-SUP-MOB-002-MAN

Page 2 of 10
Content
Packing Items................................................................................................................................................3
Packing Box 1............................................................................................................................................3
Packing Box 2............................................................................................................................................3
Screw Items...................................................................................................................................................4
Tools Needed................................................................................................................................................4
Installation Instruction..................................................................................................................................5
Notices........................................................................................................................................................10
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 3 of 10
Packing Items
Packing Box 1
Stand Mounting
Vertical Support
Notebook Stand
Packing Box 2
Stand Base
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 4 of 10
Screw Items
x 2
x 2
x 4
x 2
M6/M8*20mm
M6/M8
M10*12mm
M6*8mm
x 2
x 4
x 16
x 2
M6
M10*75mm
M8*20mm
M6*45mm
Tools Needed
Cross Screwdriver
M6 Hex wrench
M5 Hex Wrench
M4 Hex Wrench
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 5 of 10
Installation Instruction
Step1: Screwfor pickingthe two mental plates out.
-----------------------------------------------------------------------------------------------------------------------------------------
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 6 of 10
Step2: . Push the two electric cords of the vertical support
to the center hole of the stand base
Step3: .Fix thevertical support onto the stand base
M10*75mm Screws x 4 units
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 7 of 10
Step4: . Plug the cords into the ports through the holes
Step5: . Screw the two metal plates back and rotate the stand vertically
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 8 of 10
Step6: .Fixthe stand mounting onto the vertical support
M10*12mm Screws x 4 units
M6*8mm Screws x 2 units
Step7: Fix the note book stand onto the vertical support
M6*6mm Screws x 4 units
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 9 of 10
Step8: .Hang theTV panel onto the stand
Final View
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01

Page 10 of 10
Notices
Every effort has been made to ensure all information contained in this user guide is correct, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine
if it is suitable for your intended application. You assume all risks and liability associated with such use. Any
statements related to this product which is not contained in this manual or any contrary statements
contained on your purchase order shall haveno force of effect unless expressly agreed upon, in writing,
by this company.
Without this company permission, reproduction or reprinting this user guide or any part is prohibited.
The contents of this user guide are subject to change without prior notice.
ST-SUP-MOB-002 - INSTALLATION MANUAL V.01