SWNBY2PP
112TW01
SWNBY2SP
112TW01
SWNBX2SP
112TW01
SWNBX2PP
112TW02
SWNBC2PP
112TW01
SWNBC2SP
112TW01
SWNBC2PP
112TW02
Activation Prep Card
“Y”
Prep Card
“Y”
Prep Coin
“X”
Prep Coin
“X”
Coin
“C”
Coin
“C”
Coin
“C”
Appearance
Color White White White White White White White
Porcelain Top and Lid Finish √ √ √ √ √ √ √
Control Panel Selection Rear Rear Rear Rear Rear Rear Rear
Meter Case (Standard or High Capacity) Standard Standard Standard High Cpcty Standard Standard High Cpcty
Water and Energy Info
Modified Energy Factor“MEF”
ft³/kWh/cycle (Liters/kWh/cycle) 1.70
(48.14) 1.70
(48.14) 1.70
(48.14) 1.70
(48.14) 1.70
(48.14) 1.70
(48.14) 1.70
(48.14)
Water Factor“WF” - gal/ft³ (Liters/Liter/cycle) 8.4 (1.12) 8.4 (1.12) 8.4 (1.12) 8.4 (1.12) 8.4 (1.12) 8.4 (1.12) 8.4 (1.12)
Water Consumption - gal (Liter) 27.4
(103.6) 27.4
(103.6) 27.4
(103.6) 27.4
(103.6) 27.4
(103.6) 27.4
(103.6) 27.4
(103.6)
Average Hot Water - gal (Liter) 2.4 (9.0) 2.4 (9.0) 2.4 (9.0) 2.4 (9.0) 2.4 (9.0) 2.4 (9.0) 2.4 (9.0)
Technical Info
Basket Volume - cu. ft.(liters) 3.26 (92) Porcelain Stainless Stainless Porcelain Porcelain Stainless Porcelain
Net Weight - lb (kg) 190 (86) 190 (86) 190 (86) 190 (86) 190 (86) 190 (86) 190 (86)
Shipping Weight - lb (kg) 210 (95) 210 (95) 210 (95) 210 (95) 210 (95) 210 (95) 210 (95)
Electrical Requirements - 120/60/1-15 amp √ √ √ √ √ √ √
Overall Dimensions WxDxH - in (mm): 25 5/8”(651) x 28”(711) x 43” (1092)
Cabinet Height - in (mm) 36 (914) 36 (914) 36 (914) 36 (914) 36 (914) 36 (914) 36 (914)
Cycles - Normal/Hot, Normal/Warm, Perm Press/Warm, Delicate/Cold
Motor 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Water Pressure psi (Bar) Pressure Fill
20 to 120 psi 1.4/8.3 1.4/8.3 1.4/8.3 1.4/8.3 1.4/8.3 1.4/8.3 1.4/8.3
Spin Speed - RPM (2 Speed) 710, 474 710, 474 710, 474 710, 474 710, 474 710, 474 710, 474
Drain Pump Pump Pump Pump Pump Pump Pump
Performance/Features
Manual Audits √ √ √ √ √ √ √
Shows Cycle Time Remaining √ √ √ √ √ √ √
Agency Approval cULus cULus cULus cULus cULus cULus cULus
MICRO DISPLAY TOP LOAD WASHER SPECIFICATIONS
For the most accurate information, the installation guide should be used for all design and construction purposes. Due to continuous product improvements, design and
specifications subject to change without notice.The quality management system of Alliance Laundry Systems’Ripon facility has been registered to ISO9001:2008.
© 2013 Alliance Laundry Systems LLC AM11-0358R1
Speed Queen | 800-345-5649 | www.speedqueen.com/route
