Spon XC-9615 User manual

Basic functions
Receive broadcast: receive the broadcast initiated from other terminal station or server.
Modify the parameters (audio parameters, network parameters, or login password, and so on) via
WEB to realize personalized settings.
Power supply via POE (POE over Ethernet)-only one Ethernet cable required.
SIP protocol.
Each loudspeaker can be addressed and configured individually.
End-to-end monitoring of connection and loudspeaker functionality.
High volume capacity and superior speech quality thanks to the integrated 15 watts class-D amplifier
and eHD voice.
No need for central amplifiers to realize small-sized and remote PA zones.
Loudspeaker can be allocated to groups and zones
Audio functions
IVC（Intelligent Volume Control): automatically adjust the volume setting to the ambient noise level.
Scheduled program broadcasting: uploading the audio resource needed to be played for every day to
the server, and making the plan for broadcasting task. IP Horn Speaker can play the planned task
automatically which is settings by server.
Additional functions
Loop detection: with self-inspection function, and the working status can be detected.
XC-9615
IP HORN SPEAKER
MAIN FUNCTIONS
IP Horn Speaker

One-way/two way, mono
G.711a, G.711u, PCM, MP3
MIC Built-in MIC
8KHz-44.1KHz
Frequency response 20Hz-20KHz, dB-45dB
Constant resistance 8 Ω
100Hz~18KHz
97dB±3dB
88dB±3dB/W/M
Class D amplifier
10/100M Network self-adaption
Password protection, IP address filtering, 802.1x network access
control
IPv4/v6c, HTTP, RTP, TCP, UDP, IGMP, ARP, SIP
Voice announcement through built in SIP support for connection to
any IP telephone/ VoIP systemXC-9000 software
Support for SIP protocol to realize network transmission of audio
and PBX
≤5W
MIC self-detect (via built-in MIC)
15W
/
It can be realized the broadcast, alarm, and other functions with
Creamy-white
Plastic
RAM 128M
24V/1A or POE（IEEE 802.3af）
RJ45 support for POE（IEEE 802.3af）
Designed for 24/7 operation
–20°C to 50°C (4°F to 122°F) Humidity<90% RH (no condensing)
-40 °C to 65 °C (-40 °F to 149 °F)
CE、3C
283.1 x 224 x 269 mm (11.14 x 8.82 x 10.59 in)
2.0 KG
Wiring terminal （3.81-2P) 1 PCS, waterproof connector 1 set,
installation manual 1 PCS, certificate and warranty card 1 PCS
24V/1A power adaptor 1 PCS
/
Simplified Chinese, English
3 years
XC-9615
Audio
Speaker
Amplifier
Network
General
System
integration
SPECIFICATIONS
IP Horn Speaker
Security
Voice announcement
Included accessories
VoIP
Audio streaming
Audio compression
Audio input
Audio sampling rate
Built-in MIC
Speaker component
Frequency response
MAX SPL
Sensibility
Built-in amplifier
Transmission network
Supported protocols
Power consumption
Intelligent detection
(DC/POE)Output power
Event trigger
Event actions
Shell color
Shell material
Memory
Power
Interface
Reliability
Operating conditions
Storage conditions
Approvals
Dimensions
Weigh
Optional accessories
Software
Languages
Warranty

INSTALLATION
① Network interface: connect with network switcher or POE switcher via
network cable.
② Power interface: DC 24V/1A (POE supply, and it needn’t to connect with
the power if connected with POE switcher already).
Notes: ③is for reserved.
1. Please select the suitable expansion bolts to fix the bracket to an appropri-
ate position according to the size of installation hole.
2.Adjusting to a suitable angle, then tighten the bolts.
IP Horn Speaker
224 .3 mm
20 2.9 mm
283.1 mm 152mm
269mm
1 2 34
①
②
③

APPLICATION
Application 1
Application 2
IP Horn Speaker is work with SPON XCoIP protocol, and it will be ok for SIP phone
to make broadcasting to one or more IP Horn Speaker.
IP Horn Speaker is work with standard SIP protocol, and it will be ok for registering to
the mainstream IP-PBX and receiving SIP calls or initiating the broadcast.
IP Horn Speaker
IP-NETWORK
IP Horn Speaker
XC-9615
Se rve r So f tw a re
X C 9000-
SIP Softphone
IP Video console
XC-9031
SI P Phone
IP-NETWORK
IP Horn Speaker
XC-9615
IP PBX
SIP Softphone
IP Video console
XC-9031
SI P Phone

IP-NETWORK
IP Horn Speaker
XC-9615
Level 10
Level 0
Level 1 5
Idle
Noise
Intelligent Volume Control(Automatic)
IP-NETWORK
Multi cast So ftwa re 1 Multi cast So ftwa re n
IP Horn Speaker
XC-9615
IP-NETWORK
IP Horn Speaker
XC-9615
S P So ftp ho neI
SIP Phone
IP Horn Speaker
Address: SPON Industrial Park, Changsha, Hunan, China
Tel: [phone]
Fax: [phone]
Mail: [email protected]
Http: //en.spon.com.cn/
Changsha SPON Communication Technology Co.,Ltd
Application 3
Without the SIP PA server, the IP Horn Speak-
er initiate broadcasting through receiving SIP
calls or SIP soft calls to dialing IP address or
multicast address.
Application 4
IP Horn Speaker work with multicast and
different priority levels. It will be ok for multi-
cast software broadcasting audio files to one
and more than one of IP Wall-Mounted speak-
ers, and high-priority multicast address broad-
casting can end low-priority multicast address
broadcasting.
Application 5
IP Horn Speaker has environmental noise
monitoring function, and it can automatically
adjust the volume according to the site envi-
ronmental noise to ensure the clear and
recognizable voice in any time.