Spon xc-9601 User manual

Integration wall-mounted design , exquisite workmanship , integrated network audio decoding , ampli-
fier and column speaker
Waterproof and dustproof design , protection degree is IP 55
With built-in loop detection to remotely monitoring the working status of the speaker , easily to mainte-
nance
Remote digital volume adjustment
Support 1-way alarm input and alarm output
Supports detection of ambient noise during idle time, and adjusts output volume during broadcast
according to noise level
Accessible to the system if the Ethernet is available , support cross network segment and router
XC-9601
IP WALL-MOUNTED SPEAKER
MAIN FUNCTIONS
IP Column Speaker

XC-9601
Audio
parameters
Speaker
parameters
Network
parameters
Amplifier
General
parameters
System
integration
SPECIFICATIONS
IP Column Speaker
Unidirectional / bidirectional Mono
≥80db
50HZ~18KHZ
MP2/MP3/PCM/ADPCM
Built-in MIC
Frequency response: 20Hz-20KHz，Sensitivity: 45dB
1 inch tweeter, 4.5 inch woofer
90dB±3dB
100Hz～18KHz
88dB±3dB/W/M
Class D
10/100M Network adaptive
Login password protection
IPv4, HTTP, TCP, UDP, IGMP,ICMP, ARP, SIP
Accept voice announcement from sip phone
Support standard SIP protocol
Automatic speaker detection (built-in MIC)
60W/1KHZ
≦3W
White, plastic
Metal, spray
128M
AC 110-260V
RJ45、Power interface, control input \ output interface
24H/7D
–40 °C to 55 °C (-40 °F to 131 °F)
3C
160 x 161.5 x 415mm (6.23 x 6.36 x 16.34 in)
5.8KG
Expansion screw *2 sets, 4 external hexagon self-drilling screws , 2
external hexagon screws, spring washer (φ8) 2 pieces, 2 washers
(φ8), 1 terminal (3.81-2P), 1 terminal (3.81-4P), 1 waterproof
connector, 2 mounting brackets, 1 quick installation guide, certifi-
cate And warranty card 1
Simplified Chinese, English
2 years
Audio stream
SNR
Frequency response
Codec protocol
Audio input
Built-in MIC
Speaker unit
Max. SPL
Frequency response
Sensitivity
Amplifier
Network
Security
Protocol
Voice announcement
VoIP
Smart detection
Output power
Standby power
Shell color and material
Net material, surface
treatment
RAM
Power
Interface
Reliability
Environment
Certification
Dimensions
Weight
Standard accessories
Language
Warranty period

1. Using hexagonal drilling tail tapping screws (M5.2*25 4PCS) with nylon gasket
(screw prepared by yourself) to fix 2 brackets(as the the hole distance showed in the
above picture) on metal pole( light pole, control rod, and so on);
2. Using hexagonal screw (M8*10) 2pcs,spring washerφ8）2pcs,gasket（φ8）2pcs
to fix column speaker on the middle of 2 brackets.
Note: the suggestion is that it should be a angle between the column speaker and the
ground when using this way for installation.
1. Drilling twoφ12mm holes on the wall(the hole distance as the above picture
shows), installing two expansion bolts to the holes(M8*100) respectively.
2. Using expansion bolt (M8*100), with nut, spring washer, big gasket) to fix two
brackets on the wall.
3）Using 2pcs of hexagonal screw (M8*10) with spring washer and gasket (φ8）to
fix column speaker on the middle of 2 brackets.
Note: please do not stay wire to avoid internal poor connection caused by wire loose.
INSTALLATION
Installation 1：
Installation 2：
IP Column Speaker

INTERFACE
WIRING
①The power input interface
②Network interface : connect to switch
③Short-circuit input interface: when the short-circuit
interface is triggered, the speaker will automatically
play audio files under the alarmin catalog of FTP.
④Short-circuit output interface:
1: Short-circuit output NO port; 2: Short-circuit
output common port;
3: Short-circuit output NC port; 4: Free port.
①Mandatory upgrade key
Use tweezers or small pin to press the button and
power on the terminal , about 5 seconds it can force
the terminal into upgrade status
②Power and Network indicator light
After connected the power, if internet is connect, the
green light is on; If offline, the red light is ON.
③Mic
④Reset button
⑤Status indicator light
Rear panel
IP Column Speaker

INTERFACE
Application 1
IP column speaker XC-9601 has built-in 60W Class D digital power amplifier, which can
receive server software NAS-8500 / XC-9000, IP network paging microphone (such as
NAS-8502, etc.), SIP phone initating Broadcast tasks .
Application 2
IP column speaker XC-9601 has an alarm input and output interface, which can be linked
to peripheral equipment. For example, when there is an alarm input, the IP column speak-
er XC-9601 will be triggered to play a preset audio file and control the linkage alarm
output.
IP Column Speaker

Address: SPON Industrial Park, Changsha, Hunan, China
Tel: [phone]
Fax: [phone]
Mail: [email protected]
Http: //en.spon.com.cn/
Changsha SPON Communication Technology Co.,Ltd
IP Column Speaker
Application 3
IP column speaker XC-9601 has an alarm input and output interface, which can be linked
to peripheral equipment. For example, when there is an alarm input, the IP column speak-
er XC-9601 will be triggered to play a preset audio file and control the linkage alarm
output.
Application 4
IP column speaker XC-9601 has an intelligent volume control function, which can auto-
matically adjust the volume according to the environmental noise.