SPORTSPOWER MULTIPLAY User manual

!
WARNINGS!
- Misuse and abuse of this product can result in injury.
- Read instructions before assembly or using this product. Retain Instructions.
- Always inspect product before use, checking for worn, defective or missing parts.
-
This product is intended for use by children from 3 to 8 years of age.
- This unit is designed to be used by up to 4 children, with a maximum weight of 45kg
each, simultaneously not to exceed a combined weight of 180kg.
- Do not stand on the swing seats.
- Assembly by adults.
- Adult supervision at all times.
- Only for outdoor and domestic use.
SW3R-001
Tips : It will take 2 people around 60 mins to assemble this product.
USER AND ASSEMBLY MANUAL
MULTIPLAY
- Before you start assembly please check all parts are included, if any parts are missing or you
need advice, please contact Customer Services: by email [email protected], by
phone [phone] or visit www.sportspowerfit4kids.com

P. 1
Before you start...
• We suggest you spend some time reading this guide before follow-
ing the simple step-by-step assembly instructions.
• Do not discard any of the packaging until you have checked that
you have all parts and fittings listed. When discarding packaging
take care and consideration for others and the environment.
• When assembling this product be aware of the safety of yourself
and others.
• Because of the size of this product we suggest that you assemble
it in the area intended for use.
• Some of the assembly will be easier with two people. Seek
assis
tance when lifting large or heavy items.
• Assemble this product on a clean, flat and level surface e.g. the
cardboard packaging.
• Keep any tools provided or spare fittings for future use. Only use
the tools specified.
•
•
Assemble all parts loosely, by hand, before tightening any bolts or
fixings.
Consider the orientation of the product in relation to its exposure
to the sun, to avoid hazards, such as dizziness.
PLEASE CALL
BEFORE STARTING ASSEMBLY PLEASE CHECK ALL PARTS ARE
INCLUDED, IF ANY PARTS ARE MISSING,
([phone].
BY EMAIL [email protected], OR VISIT
www.sportspowerfit4kids.com

P. 2
18
4
16
17
6
18
18
18
19
19
20
13
12
12
15
15
14
10
10
11
11
14
9
9
8
8
8
8
5
5
5
5
7
6
7
2
3
1
QTYPART LISTNO.
1
2
6
7
8
TOP SUPPORT BAR
1
1
2
2
4
9
1
4
2
16
2
17
2
11
2
13
4
19
2
12
2
15
2
14
2
10
4
5
4
18
2
20
UPPER LEG
UPPER LEG
LOWER LEG
CROSS BAR
GLIDER SUPPORT CHANNEL
PLASTIC CONNECTOR
PLASTIC TUBE
GLIDER TOP TUBE
GLIDER SEAT TUBE
GLIDER LOWER TUBE
PLASTIC CONNECTOR
FOOTREST
GLIDER SEAT
SWING SEAT
ANCHOR
PLASTIC CAP
PLASTIC SLEEVE
2
TOP SUPPORT BAR
1
TOP SUPPORT BAR
3
For faulty or missing parts please contact customer services: call ([phone],
Email [e-mail] or visit www.sportspowerfit4kids.com

P. 3
D
BOLT
M8×95mm
X2
B
BOLT
M8×50mm
X2
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
ACE
"U"
BOLT
M8×114mm
X4
BOLT
M8×61mm
X3
TLOB
M8×20mm
X2
F
BOLT
M6×36mm
X4
For faulty or missing parts please contact customer services: call ([phone],
Email [e-mail] or visit www.sportspowerfit4kids.com

P. 4
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
H
G
BOLT
M6×34mm
X2
BOLT
M6× mm
X2
60
S
BOLT
M8×53mm
X4
For faulty or missing parts please contact customer services: call ([phone],
Email [e-mail] or visit www.sportspowerfit4kids.com

P. 5
K
X12
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
ARC WASHER
IL
SPRING WASHER
X21
M
x mm
X8
xmm
N
NUT
M8
X21
O
NUT
M6
X8
J
X30
FLAT WASHER
X12
ARC WASHER
SPRING WASHER
For faulty or missing parts please contact customer services: call ([phone],
Email [e-mail] or visit www.sportspowerfit4kids.com

P. 6
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
X1
SPANNER
P
ALLEN KEY
X1 X1
QR
ALLEN KEY
For faulty or missing parts please contact customer services: call ([phone],
Email [e-mail] or visit www.sportspowerfit4kids.com

step 1
P. 7
E
E
N
N
L
L
J
J
1
4
J
J
J
x 4pcs
L
x 2pcs
N
x 2pcs
E
x 2pcs

step 2
P. 8
NOTE: MAKE SURE THE UPPER LEGS 6 AND 7 ARE INVERSED ON
THE TWO SIDES.
A
x 3pcs
I
x 6pcs
L
x 3pcs
N
x 3pcs
L
A
I
I
L
N
7
6
1
2
3
7
6
6
7
A
I
I
L
N
3
6
7

step 3
P. 9
C
x 4pcs
I
x 16pcs
L
x 8pcs
N
x 8pcs
1
2
10
10
3
C
I
I
L
N

S
x 4pcs
J
x 4pcs
L
x 4pcs
N
x 4pcs
I
x 4pcs
step 4
P.10
76
9
8
8
9
8
8
6
7
8
18
9LN
J
S
I
INSERT LOWER LEG (8) INTO UPPER LEG (6 AND 7) AND
CONNECT TOGETHER WITH CROSS BAR (9). MAKE SURE TO
ATTACH PLASTIC CAP (18) TO CROSS BAR (8) FIRST.

step 5
P. 11
NOTE : ENSURE TO INSERT PLASTIC TUBE(17) FIRST.
B
x 2pcs
J
x 4pcs
L
x 2pcs
N
x 2pcs
416
17
11
11
J
4
11
J
LN
B

step 6
P.12
G
x 2pcs
K
x 4pcs
M
x 2pcs
O
x 2pcs
K
x 4pcs
M
x 2pcs
O
x 2pcs
H
x 2pcs
11
12
12
11
11
12
H
K
K
M
O
12
OMK
G
K
15

P.13
F
x 4pcs
M
x 4pcs
K
x 4pcs
O
x 4pcs
I
x 4pcs
N
x 2pcs
D
x 2pcs
L
x 2pcs
I
ILN
D
19
13
13
11
20
K
F
M
O
14
13
13
11
11
11
13
14
14
13
step 7

P.14
30
cm Width
30 cm Depth
Concrete
Ground
IMPORTANT: The product must be anchored into the ground.
For optimum safety and performance, we recommend concreting
in the corners as shown in the diagram.
8
5
step 8
35cm
40cm

P.15
SEAT ADJUSTABLE GUIDE
THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD
THROUGH THE SEAT CONNECTOR.
TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE
THROUGH THE HOLES AND TIGHTEN AGAIN.
MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE
ADJUSTED SO THAT THE SEAT IS HORIZONTAL.
IMPORTANT: MINIMUM CLEARANCE BETWEEN THE FOOTREST/SEAT
AND THE GROUND SHOULD BE 35 CM.
SEAT CONNECTOR

P.16
• NOT suitable for children under 36 months. Small parts and
long cord-choking hazard.
•Avoid chlidren facing the sun whilst using the equipment to
avoid hazards, such as dizziness.
• Adult supervision is required at all times. Never leave children
unattended.
• Product MUST be assembled and checked by an adult.
• This product is only intended for outdoor domestic use.
• Only one child per swing seat at any one time.
• Age recommendation for this product is 3-8 years.
• Max. user weight for each swing seat is 45kg.
• The Minimum distance from bottom of the swing seat to the
ground must be 35 cm ( 14 inches).
• DO NOT stand on swing seat. DO NOT stand on glide ride seat.
• Product must be assembled and used on a at and level
surface at least 2 metres ( 7.5 feet ) from any structures or
obstructions such as fences, walls, garden borders, washing
lines, electrical cables.
• The product must be secured using the anchors provided.The
anchors must be placed level with, or under, the ground in
order to reduce tripping hazards.
• Ensure the product is installed over a soft surface, such as
grass or sand, or wood bark which should have a depth of
minimum 15 cm ( 6 inches). Installation area should be
regularly checked and any shock absorbing materials
replenished to maintain a correct depth regarded suitable for
the product otherwise injuries may occur from a fall.
• DO NOT install the unit over concrete, asphalt, gravel or any
hard surface which may cause injury should a fall occur.
• DO NOT allow children to use the product until it has been
properly assembled , anchored and checked by an adult.
• Ensure children wear suitable clothing whilst using the
product. Do not allow loose clothing, clothing with
draw - strings, jewellery or any article of clothing that might be
potentially hazardous whilst using the product.
• DO NOT let children use this equipment in any manner other
than the correct intended use.
• DO NOT allow children to dis-mount any ride or swing whilst
still moving.
• DO NOT allow children to wander into the play area when the
product is in use.
• DO NOT allow children to climb or play on the product whilst
the product is wet as slips or falls may occur.
DO NOT allow children to swing empty rides as they may strike
and injure other children.
• DO NOT allow children to twist or ropes loop them over the
support bar as this will cause damage and may result in injury.
• DO NOT allow children to swing play equipment more than 60
degrees.
• DO NOT attach items to the product that are not specically
designed for use with the product; such as, but not limited to,
cables, skipping ropes, nursery swing seats as they may cause
injury.
• Remove and dispose of all packaging materials before the
product is used.
• Once assembly is complete carefully check the equipment
before use to ensure all parts are correctly assembled. Check all
nuts and bolts are tightened. If you nd any problems do not
allow children to use the product until it is t for use
• Check all parts of the product at regular intervals,
especially the top beam, frame legs, ropes and ride
supports. If you nd any problems do not allow
children to use the product until it is t for use. If these
checks are not carried out the product could over-turn
or otherwise become a hazard
• Check metal sections and components for signs of
corrosion.
• Discontinue use if any weakening or breakage is
found.
• The product has maintenance instructions
highlighting the need to carryout checks and
maintenance of the main parts at regular intervals.
Whenever practical, the maintenance instructions shall
also be axed to the toy.
• Please retain these instructions for future reference.
• Teach children to use the product correctly and sit in
the centre of ride seats whilst in use
TIGHTENING NUTS & BOLTS
• At the start of assembling DO NOT FULLY tighten bolts
/ nuts all the way so as to allow some possible
adjustment for ease of assembly.
• DO NOT use pliers to tighten up screws as they can
cause damage to paintwork and nuts and bolts.
• After all major components are assembled go back
over all bolts and nuts and properly tighten all before
using the product.
• Check swing and ride seats for any evidence of
deterioration, cracks or exposed edges which could
cause injury. If there are any such problems contact the
HELP LINE: ([phone] by email
support@sportspowert4kids.com, or visit
www.sportspowert4kids.com for replacement parts.
• Carry out checks and maintenance of the main frame
parts- cross beam, legs, ropes, anchors, nuts, bolts and
rides before each play session and at least every two
weeks.
• Check all nuts, bolts and fittings for tightness and
tighten if required.
• Check unit for sharp edges which may have occurred
during shipping, assembly ,abuse or everyday usage
.Replace if required.
• Check to ensure all rides are correctly fixed to the top
beam according to the instructions.
• Oil all metallic moving parts monthly during the main
usage period.
• To help maintain the products appearance,
occasionally clean the seats and metal framework with
a damp cloth lightly – but do not use abrasive chemical
cleaners.
• When you wish to disassemble or dispose of the
product please completely disassemble the unit and
discard of it in a safe place and manner so as not to
present any hazard to any individual.

P.17 SP-33-SW3R-001-B&M-200001
PRODUCT WARRANTY
All warranty coverage extends only to the original purchaser of the product and is not assignable or transferable. The original
store or online purchase receipt must be kept as proof of purchase in order for the warranty to be valid. These documents must
be presented in the event of making a claim under warranty.
During the warranty period, Sportspower will provide repair or replacement of defective equipment or parts thereof covered by
the warranty. Any handling, transportation, delivery and other incidental charges in respect of the servicing of the equipment
shall be borne by the Purchaser. If the product includes a number of accessories, only the defective part or accessory will be
replaced.
The warranty will become void if any defects or damages are associated with the use of unauthorized replacement parts. All
replacement parts must be obtained from Sportspower authorized agents.
All decisions made by Sportspower in respect of the servicing of the equipment (including repairs, replacements or issues
relating to defects of workmanship or materials) shall be conclusive and the Purchaser agrees to be bound by such decisions.
Any defective equipment or part thereof replaced shall become the property of Sportspower.
In the event of a product or accessory being replaced during the guarantee, the guarantee on the replacement will expire at the
original date, 6 months from the original purchase date.
This warranty excludes defects caused by the product not being used in accordance with instructions, accidental damage,
misuse or being tampered with by unauthorized persons.
The Sportspower Limited Warranty does not cover:
(a) Products used for commercial or rental purposes.
(b) Loss or damage to product due to: (i) abuse, repairs and/or tampering by any person other than the authorized personnel of
Sportspower; (ii) negligence and/or misuse (including foreign object, accident, improper storage, exposure to sun/moisture,
excessive temperature, sand, dust, dirt, other pollution or other environmental conditions and failure to follow precautions or
proper operating instructions stated in the User’s Manual such as improper installations); (iii) fire, flood, lightning strike, wind
storm or other acts of God; (vi) freight or improper transport damages, and (v) improper usage (including use by under-age,
over-weight or excessive number of users permitted as stated in the User’s Manual).
(c) Defects, damages or accidents due to the malfunction, connection to or use of non-Sportspower or unauthorized parts. In
such event, Sportspower reserves the right to cancel the Limited Warranty coverage immediately.
To the extent allowed by the applicable local law, the remedies in the Limited Warranty are the Purchaser’s sole and exclusive
remedies.
SPORTSPOWER IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARIS-
ING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH
RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT
OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
CUSTOMER SERVICE/ SPARE PARTS -(+44 ) 0330 0904 420 by
email [email protected],
or visit www.sportspowerfit4kids.com