SPORTSPOWER DFJ23 User manual

1380mm
2200mm
mm0081
APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE
30 minutes
REQUIRED ASSEMBLY TOOLS
ASSEMBLED DIMENSIONS
FLOOR AREA
2.5M X 1.5M X 1.5M
WEIGHT 12.5 KG, BUILD IN LOCATION
DESCRIPTION
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
ASSEMBLY
INSTRUCTION
After Service Centre ([phone]

5
5
9
6
8
8
8
8
4
3
2
1
7
7
43
6
6
6
9
9
9
PAGE 2 OF 11
DFJ23
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
ASSEMBLY
INSTRUCTION
DESCRIPTION
DOUBLE SWING
After Service Centre ([phone]
SW-BEAM
SW-BEAMSHORT
DBLSW-LEG-LFT
DBLSW-LEG-RGT
SW-RAIL
DBLSW-LEG-BTM
SW-SEAT2
SW-ANCHOR2
SW-CAP

F
PAGE 3 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION
GEN-UBOLTM8X114
GEN-BOLTM8X61 GEN-BOLTM8X54 GEN-ARCWASH-M8 GEN-FLATWASH-19X8.5 GEN-CAPNUT-M8 GEN-SPRWASH-M8

0cm
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
11cm
12cm
13cm
HARDWARE LIST
6mm
1X
H
1X
SPANNER
10 &13mm
I
ALLEN KEY
PAGE 4 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION
GEN-ALWR6MM GEN-SPAN5-11-13

child
PAGE 5 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION

0330 0904 420
PAGE 6 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION

TIGHTNESS AND TIGHTEN AS REQUIRED. IT IS PARTICULARLY IMPORTANT THAT
THIS PROCEDURE BE FOLLOWED AT THE BEGINNING OF EACH SEASON.
● Never use pliers to tighten up screws –these cancause damage to both the paintwork
and the specialanti-corrosion plating.
● Tighten all nuts and bolts securely. Replace asneeded. If not checked regularly, bolts
can be loose or missed and components can become detached andcause injuries.
● Check the unit at the beginning of the usage seasonand monthly thereafter for evidence
of deterioration.
● Immediately remove and replace any items thatappear to be weak or broken. Contact
customer support for replacement parts.
● Check all covers designed for bolts and sharp edgesregularly to be certain they are
present and in goodcondition. Replace as needed. It is particularly important that all
cover s are checked prior to the first use each season.
● Inspect handle bar, hardware, and etc., for properclosure and for signs of wear,
deterioration, rust and/or damage. Replace as needed.
● Lubricate all metallic moving parts monthlyduring the usage season. Applying a light
coat of automobile wax to all metal tubing surfaces will helpprotect your unit and add to
its longevity. Sand anyrusted areas of the metal tubing and repaint using anon-lead
based paint.
● Remove plastic seats and store indoors, or do notuse when the temperature drops
below 32°F/0°C.
● Check unit for scuffs, burrs, sharp edges and anyother defects that may occur from
assembly, abuse,shipping or everyday use. Burrs and sharp edgesmay be filed down
until smooth and covered withduct tape if necessary.
● To help maintain the products appearance,occasionally clean the seats and metal
framework with a damp cloth lightly – but DO NOT useabrasive chemical cleaners.
● When the time comes to disassemble and disposeof this product, please completely
disassemble theunit and discard of it in a safe place and mannerso as not to present
any hazard to any individual. Itis important to check and maintain the main partsat
regular intervals.If these checks are not carriedout, the toy could overturn or otherwise
become a hazard.Whenever practical,the instructions shall also be affixed to the toy.
CARE AND MAINTENANCE
PAGE 7 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION

Step 1
Step 2
4
3
A
C
C
F
E
X 2
C
F E A
x4x2 x2 x2
G
C
C
F
E
1
X 4
NOTE: ATTACH THE SWING
SEAT (6) TO THE U BOLT FIRST.
E
F G C
x8x16 x4 x8
34
3
4
2
1
34
43
7
7
2
1
PAGE 8 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION

C
F D B
x4x4 x4 x4
E
x4
ATTACH FIRST
OUTER SIDE OF
6
9
5FE
D
B
C
X 4
34
43
6
6
6
6
5
5
2
1
Step 3
PAGE 9 OF 11
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION

×4
30cm Width
30cm Depth
Concrete
Ground
IMPORTANT: The product must be anchored into the ground.
We recommend that it is concreted in.
6
8
Step 4
PAGE 10 OF 11
SP-JH-SWR001-SD-15001
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION

SEAT ADJUSTABLE GUIDE
THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD
THROUGH THE SEAT CONNECTOR.
TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE
THROUGH THE HOLES AND TIGHTEN AGAIN.
MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE
ADJUSTED SO THAT THE SEAT IS HORIZONTAL.
IMPORTANT: Minimum clearance between the footrest/seat and the ground should be 35 cm.
PAGE 11 OF 11
SP-19-SW2R001-SD-17001
DFJ23
DOUBLE SWING
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
ASSEMBLY
INSTRUCTION
DESCRIPTION