Spracht Conference Mate User manual

Conference Mate™ Combo
Bluetooth Wireless and USB Combo Speaker
QUICK START GUIDE
®
PRACHT

Powering On/Off
The ON/OFF switch has 3 positions:
Left: OFF.
Center: ON. Conference Mate™ connects with the most recently paired device.
Right: Enter pairing mode.
Pairing your A2DP Bluetooth® Devices with Conference Mate™
• Turn the ON/OFF switch to the right. Conference MateTM will enter pairing
mode, and the blue and red LEDs on the unit will flash alternately.
• Activate Bluetooth® on your mobile phone (or other Bluetooth® enabled
device) and search for Bluetooth® devices (if in doubt please refer to your
smartphone’s user manual for details on activating Bluetooth®).
➊
➍
➋
➌
➎
+
–
x

➏➐➑
➊Volume Down
➋Volume Up
➌Microphone Mute
➍Answer Call
➎On/O Pairing
➏ LED
➐USB Port
➑3.5mm Jack
➒NFC Antenna
➒

• Activate Bluetooth® on your device and search for Bluetooth® devices (if in
doubt refer to your device’s user manual for details on activating Bluetooth®).
• Follow your smartphone’s instruction guide to connect to a Bluetooth® device.
Select Conference Mate from the list.
• If pairing was successful, the blue LED indicator will flash for 5 seconds.
Pairing your Device via Near Field Communication (NFC)
• Turn on the NFC function in your mobile phone.
• Turn the ON/OFF switch to the right. The unit will enter the pairing mode, and
the blue and red LEDs on the unit will flash alternately.
• Place your mobile phone in or near the middle of the center ring where the
NFC antenna is located.
• Follow your mobile phone’s instructions to complete the pairing process.
Answering a Call
When there is an incoming call, you will hear the phone ringing through the
Conference MateTM, and both the Answer/End Call and Mic Mute areas will
flash. Press Answer/End Call to accept the call, or answer the call via your
phone in the normal way.
Reject a call
When there is an incoming call, you will hear ringing through Conference
Mate’s speaker. Press Mic Mute to ignore the call.
Ending a call
Press End Call to end the call or end the call on your phone in the normal way.
Music playback
• Make sure your cell phone or Bluetooth® device has already established an
A2DP connection with Conference MateTM.
• You can listen to your music from Conference MateTM while using your
Bluetooth® cell phone or other Bluetooth® device for playback.
• Press Answer/End Call to start or pause music playback. The Answer/End
Call LED will flash.


Troubleshooting
Conference MateTM doesn’t pair with your device Conference MateTM needs to be in pairing
mode and within range
Conference MateTM not responding Conference MateTM will enter sleep mode
if no device paired successfully after 4
minutes. You must turn Conference MateTM
OFF and back ON
Red LED is ashing Conference MateTM needs charging
Specications
Built in Battery: Li-Ion Rechargeable
Wireless Bluetooth® range: up to 33’(10m)
Playback time: Up to 7 hrs
Audio Bandwidth: Voice, 8kHz sampling; Music, 44kHz sampling
Loudspeaker Output: 2 x 2Watts
Audio Input Jack: 3.5mm
Dimensions: 4" x 2" x 4" (100mm x 52mm x 100mm)
Weight: 8.4 oz (238g)
Certications: FCC, CE, C-Tick, RoHS
Works with Skype™, Lync™ (Skype for Business) and other VoIP video/audio conferencing
applications
Package Contents
Spracht
974 Commercial Street, Suite 108
Palo Alto, CA 94303
www.spracht.com
www.spracht.com/warranty/
®
PRACHT
HEAR. BE HEARD.