Springteq iHUD User manual

ia
r;l How to connect with Android P
SAMSUNG 53 / Note 2 need a
5 pin to l{ pin conector to completo
the connection between Phone and
cable
Table PC or smart phono supported HDMI
output is able to connect with iHUD, but
tho cabl6 typo must be changod rofor to
model of your device
Suitable for the cars of installing iHUD
Windshield angle > 25" <40"
oWindshield angle > 40"
Trucks
WifeleSS link (only support android 2-2or later.-.)
User need to buy their own WiFi display dongle
and connection method as shown below
WiFi display dongle HDMI cable
Power cable
(micro USB to mini USB)
Depends on lhe connector
ot srnart.p_hone or table PC mlcE
-lmiso HDMI i.iblil
U
ffi
'L-._
^*
gflt How to connect with iPhon
qxy Apple 30 pin Digital AV AdaPter
user need to buy their own 30 pin Digital AV adapterfrom Apple store
s@fi$l LightningOigitalAVAdaPter
User need to buy their own Lightning Digital AV adapter from Apple store

Base setup rr> iHUD setup rr> {. Reflective Pad
Connect to Smart phone
Tear off the protective film
ot glue sido
Tear off the protective film
of adhesive silicon glue
Clonf irrr(1,!lr' ir|vilrLlshr,r.rtri,-lr Ld
Afflxing the rellectivs pad
rv
t/_J
:i.
Compress tighlly the glue
with the thumb
Tear off the protective film
0f image side
ix:ffi
2. Refleetive film
Diluted soapy water Sprayed with diluted 6oapy water on wind shield
Afflxing the rEflective film on
windshield ane ad.lust lhe
position
L/ . .,i
\..-.- l
- .,-r,.'rt1'9.:. ]
, '1r'1"f. rr-)11;. . -'.r:'
,i t-,...r::.r$-, '1i:!_ ...
i....--!.;.d \\.-r, .t I', i
: i-\iilrlt..i, ll . ' e
Use card to scrap out of the
water between the windshisid
and film
, ..1
-7.
Sprayed with diluted soapy
water on back side of
reflective film
Can be used after the dryness
17
L.J
- .. i;;.1.,.,. .l
r: i.,,':-,.t*il
"i '' :.. -:'-- !l:. 'it .,.
a
I : i'...,i:-.,:tl.. i-. '- 9.
3. AR film
Both sides have a protective tilm
Fron Rear
{ioago sido) (Adh€silo Bido)
CdN I Ughrhlro Coltr: Trrn.prroat
,1.
Tear the protective film
on the back
Clean ard lvile thr wirds[]ektl
and dried
Afflxing the AR filrn on
LJ
_, .-r.tj-. -,
. r, , tii ,rj---
. : ; ,, -..{il3ai:. _ ,' ...
', i 1.,':..nfi\ri irrl I..' l
' r- I n
-, J.
Posl a tape on lhe cortrer
of the fllm
Pinch tho tape lhan tear then fi|tr

Enioy driving wittt |HUD
-Qspringteq

Thank you for purchasing this product. To help famili-
arize yourself with :1s operation, please read this
manual carefully before aftempting lo use the product,
and save this manual for fulure reference.
Multimedia Head Up Displayer.
iHUD is the world's first high resolutlon HUD capable
for Smartphones, 2-Din Car System or any composile/
HDMI video/audio outputted device, Mainly display
any conlains from any video/ audio devices into HUD
mode to project onto the windshield while driving,
therefore, driver can always easily have the key
information such as Speed, Road lnformation, OBDll,
lncoming Calls, Webcam Calls, or Navigations without
any inattention by leaving eyes on the road which
great'y enhances driving safety.
Please verifu that the package conlains the
following items. ll any item is missing or damaged,
please contact your local distributor immediately.
IHUD System Details
The base stand for iHUD does not require modifying
the interior of the car, and no tools are needed for
attaching it 1o most dashboards. ln addition, the base
stand allows for adjustments to the viewing angle
of the iHUD system unit to suit the height of the driver
and the slope of the windshield or dashboard surface.
The base stand's design uses screw that can be loos-
ened or tightened with a coin for ease and convenience.
1. Slide the base stand (2) onto the slide rails attached
previously until it locks into place. Reverse directions
to detach the IHUD system unit.
1 . Because of the materials usod for the surface of a
car's dashboard are typically smooth and often coated
with varnish, making it difficult to achleve a strong adh-
esive bond, it is recommended that before installailon,
a piece of cloth moistoned wlth alcohol be used to wipe
the surface to the dashboard.
2. Before installation, the protoctlvo fllm on the base
stand's PVC pad must be peeled ofi. (lt is recommended
that you keep this protective film for future use in case
you decide to remove the base stand and wl8h to prevenl
dust from sticking to it.)
3.Press the iHUD system unit against the surface of the
car's dashboard (with the lens cover polntlng toward the
driver) to attach it. (lf space allows, it is recommended
that you position it close to the windshield.)
4.lf you need to adjust the tilt of the |HUD system untt,
remove the iHUD and tighten the quick-release Bcrew
to appropriate tightness on the base stand. and then
re-attach the |HUD system unit to adjust the angle by
moving main device.
S.When you need to remove the base stand, simply use
your hand to lift up one corner of the PVC pad.
Angle allowance
To accommodate different dashboards, the angle of
the iHUD's base stand can be adjusted based on the
driver's height, and the angle of the windshield or dash-
board (up to a maximum of 15" in either direction).
lxl) (x1) tnt
*m *
61) (xl) 7. USB b dd USA
(xl) (e)
s
(x1) mhw8 (x1)
ea
R9fledive pad AR film
(Optional )
,.\
v
la
r;r
SAMSUNG 53 / Note 2 up need a
5 pin to 11 pin micro USB connector to complete
the connection between smart phone and
MHL cable, otherwise the image can't be output
Table PC or Smart phone supported HDMI out function
is able to connect with iHUD, but the cable type must
be changed refer to model of Table PC or Smart Phone.
Generally, interface of HDMI has two different types in
micro HDMI or mini HDMI. Power recharging, mosfly smart
phone contains micro USB connector, iust need an extra
connecting cable for micro USB to mini USB.
Depend on the conneclor ot mini
smarl phone or Table PC HDtl

Connecting meihod ahown on above drawing.
Customer must prepare an APPLE connector and
HDMI A to C cable. Powsr can be rocharged by
connection betureon USB to mini USB cable and
iPhone cable.
APPLE AV adapter contained two types in
iPhone 45 and iPhone 5 up
iPhone 4s : Apple 3Gpin Digital AV Adapter
iPhone 5 up : Lightning Digital AV Adapter
lnsert one end of the cigarette lighter adapter (4) that
comes with the iHUD into lle system uni!'s power
adapter sockel, and the other into the caas cigarette
lighter
The lens cover seryes both to prolect tho lens and to
prevent glare. When using the |HUD, you must first
open the lens cover, and then adjustthe angle appro-
priately. When not using the |HUD, close the lens
cover over the lens to protect it from scratching by
fo.eign matter.
Please use the following sleps to affix the reflective
pad:
1.Use a clean cloth to wipe the area on the glass
where the reflective pad will be affixed.
2.Tear both side protective film from the reflective pad.
3.Lightly place the reflective pad against the windshield
at the location where the iHUD's projected image
appears.
4.Sit in the driver's seat in the attitude you would
normally take when driving, and then make any
adjustmenls in the position of the reflective pad to
obtain an optimal view before take off adhesive
silicon glue and fixed the pad on windshield
Tear both side protective film of reflective pad
ff'
Tear the orotective film
of adhesive silicon glue
Affixing the reflective
Upad
Affixino the reflective film
Nlf you choose to u8o a reflective film,
the applying msthod i8 same for an
auto insulation paper.Mix a few drop
of dishwa8hing llquid with water and
spraying thom on windshiBld and
adhosive sido ot tho rsfloctive film in
same tim6 befors adhesion,Aftor the
roflaclive tllm pastod on a satlsltad
position, applying a plasiic card to
scrape water & bubble out from the
botlom and wipe the surfam a.oJnd
to dry out.
Product Specifications
Power Car charger.
lnput voltage: 9V - 16V (2.2A)
Signal lnput HDMI / CVBS
Capable
Smailphones (Any blands with TV out tuntions),
2-Din Car System, OBDII Bluetooth Device,
Side View CameE, Raserue Cam, MP3 Playec,
PCs, DVD Players, )igital Cameras, .. Etc.
(Or any devicos aome with HDMI/ CVBS signal).
Light source High Brightnsss LEo X 4, Lifetimo 50000 houre
Auto Light
Sensor Auto 4 lieE back light ad.iuslment
(16lies of manually)
Audio 1W Speaker x1
Screen Full Color 5'(viduaa image)
Resolution: 400 x 240
Brightness : 5,000-7,000 cd/m2(Max)
Operating
Environment Worklno TempeEture: -'10'C - +60'C
Stomge Temperature: -20"C - +70"C
Dimension 189(L) x 110(w) x 74(H) mm
Weight 388 g (System unit base excludod),
845 g(Completed packed)
Accessories 2.5mm Phona Ja* connffi.
mina UsB ftnnetu.(kbl€)
Adlu6bble B*e
Sllde Ralls
CarCha@6.
CabloorEa#d odonalAc€swes
MHL ArhpE
HDM|t.midHDM|Ed. RofdPd
micb usB b dniusB ARfllm
i"nm" tr* $ISUNG 53 / Nd€ 2 &3pB