HUSKY LINERS 6203 Manual

6203.doc
08/23/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409®or Glass Plus®work
well. Use of Armor All®, Son-of-a-Gun®or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR TRAILBLAZER EXT, ENVOY
XL & ENVOY DENALI XL SECOND SEAT FLOOR LINERS WITH AIR
VENTS ON SECOND SEAT CENTER HUMP
NOTE THAT THIS PART FITS THOSE VEHICLES THAT HAVE SECOND ROW AIR VENTS LOCATED ON THE
CENTER HUMP. THIS FEATURE IS A LATE 2005 ADDITION TO THE TRAILBLAZER EXT AND ENVOY XL.
ALL ENVOY DENALI’S HAVE THIS FEATURE. PHOTOS ON THE BACK SHOW THESE VENTS.
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
FRONT OF VEHICLE
NOTICE: RIGHT LINER
OVERLAPS LEFT LINER

6203.doc
08/23/2005
AIR VENT ON CENTER HUMP---2005
TRAILBLAZER EXT-DRIVER’S SIDE (#6203)
AIR VENT ON CENTER HUMP---2005
TRAILBLAZER EXT-PASSENGER’S SIDE (#6203)
PART #6202 SHOWN IN A 2005 TRAILBLAZER EXT (DRIVER’S SIDE).
NOTE THAT THERE IS NO VENT ON THE CENTER HUMP.