SpyCameraCCTV SPYPEN720 User manual
Getting Started
Before using the SPYPEN720, we recommend
making sure the device is fully charged.
To charge, connect to any of your computers USB
ports while your computer is powered on.
For playing back the les on your computer, we
recommend using VLC Media Player. The latest
version can be downloaded for free from http://
www.videolan.org
Installing the microSD Card
Place the microSD card, text side up, on the
back side of the USB connection, then push in
to the slot as far as it will go (See image to the
left). A small amount of the microSD card will be
protruding, this is normal.
Recording Video
Make sure the mode switch is set to position 2.
Press and hold the power button for 2-3 seconds.
The orange and blue light will come on for a few
seconds, then the blue light will ash and the
device will be recording video. To stop recording,
press the power button and the light will turn
orange.
You can now power o the device by holding
down the power button for 2-3 seconds.
Recording Audio
Make sure the mode switch is set to position 1.
The orange and blue light will come on for a few
seconds, then the orange light will ash and the
device will be recording audio. To stop recording,
press the power button and the light will turn
orange.
You can now power o the device by holding
down the power button for 2-3 seconds.
Product Guide:
SPYPEN720
Get to know your pen
Taking photos
Make sure the mode switch is set to position 1. Wait
for the orange light to ash and turn o. Now press
the power button and the orange light will come
on. Now each time you click the power button
again, the light will ash blue to indicate a photo
has been taken.
When nished, you can power o the device by
holding down the power button for 2-3 seconds.
Playing your les
To play back the les, connect the SPYPEN720 to
one of the USB ports on your computer. In most
cases a dialogue box will open, select “Open folder
to view les” You should now see folders called
AUDIO, IMAGE, SYSTEM and VIDEO
Setting date & time
On the CD you will nd a le called time.txt
To set the date and time, rst copy this le on to
your computer. It doesn’t matter where, as long as
you can nd the le once you have saved it. Once
copied open this le. It contains the date and time in
the format YEAR.MONTH.DAY hour:minute:second.
Edit the le to the current date and time, for
example. At 3PM on the 14th October 2013 the le
would be changed to read:
2013.10.14 15:00:00
Once you have set it to the current date and time,
save the le. Then connect the SPYPEN720 to your
computers USB, and copy the saved time.txt to the
pens storage. Now disconnect the pen and power
it on. The date and time will be updated to the
information in the le.
All done!
Dimension (mm) 150x14x14 approx.
Weight (g) 45
Lens Angle 110 °
Minimum illumination 1 LUX
Video Format AVI
Resolution 1280x720p
Framerate 30fps
Photo Format JPG 1280x720
Audio Sampling 16 bit
USB inteface USB 2.0
Battery Voltage DC 5V
Storage Temperature -20 °C to 80°C
Reset function
If the unit isn’t functioning correctly, it can be
reset, using something like a tooth pick to press
the reset button. The unit should now function
correctly.
